Interesting hydraulic hole-less elevator, I've seen an elevator similar to this one expect roped. Never seen a power unit like this one, I'm assuming the valve are top of the housing with a submerged pump in the oil tank. Runs on 3 phase power? 230,440 or more.
5:30 It May seem strange but the pump motor is usually submerged in the oil with the operating valves on top of the tank. It’s common these days to have the hydraulic cylinder in the side of the shaft, and often with a rope connection to the car. That saves having a deep bore hole underneath to accommodate it. There’s lots of problems creating that borehole in a crowded town or city.
Looks like a pumping unit for a limited use limited access elevator max speed 30 fpm and that flexible hose to replaced or pressure tested every 6 years unless there is an over speed valve.
Can anyone explain what part of the hydraulic system makes that loud hissing sound when the elevator is about to stop or when it is going down? Our elevator does the same exact sounds and I always wondering!
@@Simos805engineering has progressed significantly over the years. Laminar flow with bigger hydraulic lines sometimes has something to do with it. Also mufflers as well as oil properties such as viscosity and also what the oil itself is actually made out of, are also factors
So you don't have to watch the video Lucky Bulb replied to you, I will explain it for you. On the side of the door frame in the shaft, there is a lever with a wheel on the end. If you push on that, the door unlocks, and you can open it. On the side of the Elevator cab, there is a bar that pops in and out that pushed on that lever.
So I guess it's just a box mounted on what's basically an electric jack. Rather interesting. This one has internal doors which is odd for these kinds of elevators, but the fact that the outer doors swing open is already bizarre and foreign for Americans like myself.
Nice Bauer elevator, good Video
I was so happy to see my first hydraulic elevator motor, it was the best day of my life
They’re quite boring things to watch, even when they’re running.
It's just like lifting weights with your muscle power (manpower) 💪
Nice video, thanks for posting!
nice elevator!
Thanks :)
DieselDucy емвпеев
@@luckybulb j
H
Nnm/m
Mm/m 25j f it'ssc h it's i n bvhAAbvhAA
@@johncotter8886 ñ
@@user-vy9ib8zg8g тгр
Not many machine rooms have a hole in it:)
Good vid!
The first
How do you route out ropes in conventional machine rooms? ;-D
Thank you so much for sharing. I really appreciate this comprehensive look inside. :-D
3
Bila
I watch this video in a long time
Awesome video. Been trying to see how the hydraulic elevators work vs rope
+Daniel Rivera Much Thanks :)
most hydraulic lifts have ropes, you can use a smaller ram 2 to 1
Daniel Rive
Tony Baines
What kind of liquid does a hydraulic elevator use? Also if an elevator had a rope, what would be the ropes purpose?
Awesome video!
N.E.A. Elevators Thanks ;)
Nice video
Interesting hydraulic hole-less elevator, I've seen an elevator similar to this one expect roped. Never seen a power unit like this one, I'm assuming the valve are top of the housing with a submerged pump in the oil tank. Runs on 3 phase power? 230,440 or more.
This is an ALGI elevator, with telescopic cylinder.
It runs on 3 phase power, 400V ;)
5:30 It May seem strange but the pump motor is usually submerged in the oil with the operating valves on top of the tank.
It’s common these days to have the hydraulic cylinder in the side of the shaft, and often with a rope connection to the car. That saves having a deep bore hole underneath to accommodate it. There’s lots of problems creating that borehole in a crowded town or city.
400v 3P at 50 Hertz. Probably at least 30 hp
Great video. I was surprised to see the rams are on the sides. Makes sense, I guess I just assumed it would be in the center.
Nice elevator 🛗
Looks like a pumping unit for a limited use limited access elevator max speed 30 fpm and that flexible hose to replaced or pressure tested every 6 years unless there is an over speed valve.
I bet that cut at the beginning was the kid saying why does it smell like hydro fluid?
I bet you have been commenting too much.
Didn't realize hydraulic elevators were so slow. Cable ones are a way better design. Counterweights make all the difference.
Tom Smith and noizy!!
Cable elevators are also significantly more expensive.
Can anyone explain what part of the hydraulic system makes that loud hissing sound when the elevator is about to stop or when it is going down? Our elevator does the same exact sounds and I always wondering!
It's the valve slowing the flow of the oil and when going down it uses gravity so it's the sound of oil rushing into the tank
@@QEElevators And how they managed to make it silent in newer machines?
@@Simos805 Most new ones aren't, I've never seen a silent new one it might be the type of piping
@@Simos805engineering has progressed significantly over the years. Laminar flow with bigger hydraulic lines sometimes has something to do with it. Also mufflers as well as oil properties such as viscosity and also what the oil itself is actually made out of, are also factors
That's got better hoistway lighting than anything in the metro st. Louis mo. Area. I'm lucky if the cartop light is bright.
Wow good chanel
I Always find hydraulic elevators interesting..
I always find you interesting...
Is the controller relay logic?
I dont understand how that little motor box can lift such an immense elevator car
+francobobfred the same, like you are able to lift a 2ton car just with your hands and a small hydraulic hoist
That's why hydraulics are used! They are great for high torque applications.
very nice interesting video
Thanks :)
this Elevator is in Germany ?
This is in Germany, near Siegen town ;)
Is it low on oil?
No. You have been commenting on this video WAY too much.
vielen Dank.
Once at a hotel the people who worked at the hotel or it was the manager who let me do it and for the first time I saw that elevator motor
OHH NO ITS MODERNIZED!
R.I.P.
2:40 pump turns on
2:38 4:06 get es an
wery nice elevator
Cómo tienes el niño llaves de eso
Frau Dr. med. Doris Ecker-Lueg
Rathausstraße 5, 57234 Wilnsdorf
02739 2989
maps.app.goo.gl/avtkr9RSKXJLns2v6
How did you get back there and will you bring ma with you plzz
In 2018
Seems a bit low on oil
Hi
How far is the car from that hole in the motor room?
0:06 Video starts.
Cool
the Elektric Motor inside the oil tank..normali 3 to 5 HP elektric Motor.
That is cool
i have a hydraylic elevator who is modernized by emgi lift AE
F-sharp pitched motor
No toe guard?
1:09 oh my ears 🤕
How do you unlock the hoistway doors from inside the shaft?
th-cam.com/video/5a3JluYVdnM/w-d-xo.html
So you don't have to watch the video Lucky Bulb replied to you, I will explain it for you.
On the side of the door frame in the shaft, there is a lever with a wheel on the end. If you push on that, the door unlocks, and you can open it. On the side of the Elevator cab, there is a bar that pops in and out that pushed on that lever.
Samuel Schneider Thank you very much.
Lucky Bulb Thank you for that video.
@@MrEngineer20051 That moving part is the retiring cam
😎Like
it gives me nightmare
So I guess it's just a box mounted on what's basically an electric jack.
Rather interesting. This one has internal doors which is odd for these kinds of elevators, but the fact that the outer doors swing open is already bizarre and foreign for Americans like myself.
kargaroc386 c vkcb
Big room small motor bruh
Only 20 bar.
hallo
Too dangerous for a simple show
Allo
It was a bigger hydraulic elevator motor than this one, the one I got to see was bigger!
Andelo
Hole-less Hydro
K
E
1
2
PSI Todo de oddxll!!de FX dos dm
'
All I hear nheeeeeeeeeeeeeeeeeeeeeeeeeeeeee weeeeeeeeeeeeeeeeeeeeeee rrrrrssssssssssssss
I DO NOT LIKE IT
hidrolic bad
Not many machine rooms have a hole in it:)
Good vid!