Hola Dune y yo que estaba preocupado al ver mi motocicleta un poco deteriorada y al ver esa me a dado mucho ánimo de verdad porque la mía se ve mucho mejor que esa pero ya la estoy restaurando casualmente mi filtro de aire estaba así en malas condiciones igual la balbula de paso se combustible que ya me la entregan en la primera semana de junio 2022 saludos gracias por tu video y para la próxima use mascarilla al sacar otro filtro como ese es peligroso el sucio que puede aver ahí como de Roedores y cucarachas cuida tu salud muchacho saludos 🇵🇦🤝
Thanks man. I still have the Suzuki. I actually ran it for a little bit today because it's been sitting for a while. I don't see it going away any time soon. It's a great bike. The honda went through 2 top-end teardowns, first time I bought cheapo Chinese rings and installed them with the stock piston and it smoked like a chimney. It turned out the oil rings slightly different, so then I bought WISECO piston and rings and it runs much better. I also did some upgrades to it like converting the rear end to disc brake from a 1990 xr250r donor (unfortunately I was unable to record it because I was busy with other projects in between). I think the next video on xr250r will be me showing the upgrades and taking it into the woods for a ride. Thanks for watching the videos. Your comments are much appreciated.
Lol I got two of them for $150. A 89 and a 94. The 94s motor is in a thousand pieces and the 89 has low compression. It's cylinder is actually at the local Honda dealer being bored for a new wiseco piston. Then I plan to just put that motor in the 94 it's plastics are in better shape. Then I also have a 90 xr200 I bought off Facebook for $100 than had a bent valve and crack on the clutch cover. So all I need for it now is to find a cheap good clutch cover for it. I'm gonna wait and check the boneyard at the local Honda dealer when I go to pick up the 250s cylinder cuz they have a bunch of 200s in there I was able to get me a set of side panels for it las time I went there before I'd found the cracked cover.
![ความรักไม่ได้น่ากลัวขนาดนั้น (TRUST ME) - LYKN [ OFFICIAL MV ]](http://i.ytimg.com/vi/9np-lAtCRpQ/mqdefault.jpg)
Hola Dune y yo que estaba preocupado al ver mi motocicleta un poco deteriorada y al ver esa me a dado mucho ánimo de verdad porque la mía se ve mucho mejor que esa pero ya la estoy restaurando casualmente mi filtro de aire estaba así en malas condiciones igual la balbula de paso se combustible que ya me la entregan en la primera semana de junio 2022 saludos gracias por tu video y para la próxima use mascarilla al sacar otro filtro como ese es peligroso el sucio que puede aver ahí como de Roedores y cucarachas cuida tu salud muchacho saludos 🇵🇦🤝
I have an 86 250r had it since 1990 great bikes you can't wear them out
Nice bike. I have the same one. All that's left to do for mine is restore the plastic colors and seat cover 😀
For the broken clip you can weld those with a zip tie and a sodering iron
Good idea. I haven’t thought of that. I ended up epoxying it and it’s still holding up good.
That bike is owsome
Thank you. It puts a smile on my face every time I take it to the trails.
I need complete engine of xlr baja 250 md 22 am from africa thats my whatsaap no maybe you can help me +254729862198 (email khalifapains@gmail.com
Good for you man, that gen XR250R is the critics choice. Looking forward to Future installments! Does this mean the Suzuki's history?
Thanks man. I still have the Suzuki. I actually ran it for a little bit today because it's been sitting for a while. I don't see it going away any time soon. It's a great bike.
The honda went through 2 top-end teardowns, first time I bought cheapo Chinese rings and installed them with the stock piston and it smoked like a chimney. It turned out the oil rings slightly different, so then I bought WISECO piston and rings and it runs much better. I also did some upgrades to it like converting the rear end to disc brake from a 1990 xr250r donor (unfortunately I was unable to record it because I was busy with other projects in between). I think the next video on xr250r will be me showing the upgrades and taking it into the woods for a ride. Thanks for watching the videos. Your comments are much appreciated.
Where the crap do you get an XR250R for 550 bucks... I can't find anything under 1500.
Well I bought it for $500 but then ended up spending over $1000 fixing it lol
found one with vavle problems for 1k, guy was riding it 1 week before. I recommend facebook market place.
@@BigOtooHungry Thanks Oscar, yea I've been on facebook marketplace and they have a lot of good deals.
Lol I got two of them for $150. A 89 and a 94. The 94s motor is in a thousand pieces and the 89 has low compression. It's cylinder is actually at the local Honda dealer being bored for a new wiseco piston. Then I plan to just put that motor in the 94 it's plastics are in better shape. Then I also have a 90 xr200 I bought off Facebook for $100 than had a bent valve and crack on the clutch cover. So all I need for it now is to find a cheap good clutch cover for it. I'm gonna wait and check the boneyard at the local Honda dealer when I go to pick up the 250s cylinder cuz they have a bunch of 200s in there I was able to get me a set of side panels for it las time I went there before I'd found the cracked cover.
My XR 250r sat for awhile mice ate air filter too