You might know this lock from th-cam.com/video/ZBE4FAvlcvo/w-d-xo.html where I picked and gutted it. In this video you see how I put it back together. have fun - it's not so difficult if you own a plug follower with a slot and a pinning shoe.
It was just an example, foxxxy has 3d printed it. Others have also made them themselves from sheet metal. Or maybe another commercial source has them also. Good luck.
Great video. I had one today that required the front loader tool because the thumbturn side was not removable (without drilling), and your spot on about those cam pieces being different designs. Definitely need to pay attention when pulling apart so you know how they go back together. Thanks for sharing!
This was a great video. I'm from the US and have reassembled many locks but never the Euro cylinders. It's the part that everybody skips on the videos because it's not sexy. Thanks for publishing great content!
Great video - very useful to know how re-assemble - most videos show how to gut a lock but not how to put it back together - especially if it is a double sided euro lock
Thank you for doing this video my friend. I have a full Euro now, and it's nice to see how to put one back together. I've watched other videos on how to do this, but none recently. I have all the stuff to do it, just never got around to doing a full Euro.
Thank you - this one was easier than the average but you need to try it yourself to gain experience ;-) It's just pieces of metal, not a piece of art ;-)
i have a problem, when i removed the clamp and try to take out the plug the key got stuck in the cylinder and they both got stuck. Do i need to remove the second clamp or is my lock broken?
With the spring steel clips it's easy th-cam.com/video/xmi3_QwoqjI/w-d-xo.html But for these bendy ones, special pliers exit. But I'm not possessing these pliers so I'm just using two small screwdriver to tighten the clip.
Great video, I have been struggling to pick a full Euro cylinder lock,and would like to strip it down and reassemble it ,using only the key, (without having to pick it) thanks for the information
Exceptionally clear and educational tutorial! I've got the locks, just need the tools, patience and a little prayer to gut them. 👍 Is the pinning shoe you used homemade? I'm curious to see if I can make something similar from my "scraps" collection. 🤔 I really need to get my hands on Dremel type tool.
Haha, don't pray too much, just try it. Old euro lock are not hard to find and are cheap. I've messed up one or two but that's part of the thrill ;-) Have a look here for a home brew pinning tool th-cam.com/video/KP-9SdKinzE/w-d-xo.html It's made from a windshield wiper blade.
You might know this lock from th-cam.com/video/ZBE4FAvlcvo/w-d-xo.html where I picked and gutted it. In this video you see how I put it back together. have fun - it's not so difficult if you own a plug follower with a slot and a pinning shoe.
البحث في العناوين والنصوص
😅😅0😊
@@hamidhamid4100. De
This will be an incredibly useful video for many many people. I’m glad you did this without a front loader too :-)
where can i get a front loader from - I have seen them in use but cant see when to buy one
Thank you mate - the front loader is great if you don't wanna gut the other side.
I found something here thinkpeterson.com/universal-top-loader-in-a-tube/
shipping to the UK is expensive - total for tool and shipping is $87.00 - can't afford that for a single tool
If I can find a similar tool for less
It was just an example, foxxxy has 3d printed it. Others have also made them themselves from sheet metal. Or maybe another commercial source has them also. Good luck.
Very interesting tutorial.
I've always wondered how the two sides were done at once.
Thank you for doing this video, cheers
Cheers mate, glad that the video was helpful.
You saved my life! I messed up with an euro cylinder like that one but now I can fix it. Thank you so so much!!
Glad the video was helpful.
First time I have ever witnessed this full event! Thanks for the demo!
Haha, glad you had fun :-)
Great video. I had one today that required the front loader tool because the thumbturn side was not removable (without drilling), and your spot on about those cam pieces being different designs. Definitely need to pay attention when pulling apart so you know how they go back together. Thanks for sharing!
Very cool video my friend very nice fun to watch👍😊👍😊😎😎
Thanks buddy, glad you had fun watching.
This was a great video. I'm from the US and have reassembled many locks but never the Euro cylinders. It's the part that everybody skips on the videos because it's not sexy. Thanks for publishing great content!
Thanks, glad you liked it. For me it's part of the fun to get them back together.
Excuse me, where can I buy the kit I used in the repair?
Great video - very useful to know how re-assemble - most videos show how to gut a lock but not how to put it back together - especially if it is a double sided euro lock
Thanks. Glad you found it useful - it's part of the fun to to get them back together ;-)
Very helpful. Exactly what I was looking for.
Excellent Video Sir! Very Well done! The pinning shoe really works here! thanks!
Thanks a lot - glad the video was helpful.
❤❤❤ EXCELLENT JOB,MY FRIEND!!!THANK YOU VERY MUCH!!!❤❤❤
Thank you for doing this video my friend. I have a full Euro now, and it's nice to see how to put one back together. I've watched other videos on how to do this, but none recently. I have all the stuff to do it, just never got around to doing a full Euro.
Thanks buddy and good luck, just give it a try. I can send you plenty of euro lock when you mess up yours ;-)
Excellent walkthrough. I've always been hesitant to gut full Euros, but you made it seem easy.
Thank you - this one was easier than the average but you need to try it yourself to gain experience ;-) It's just pieces of metal, not a piece of art ;-)
@@Potti314 alatnya yg ingin saya punya
Excellent vid. Answered all my questions. Thanks
Thanks for the kind feedback. Appreciate it.
Thank you for this video and I hope to make one about built cylinder and pin &pin tumbler thank you
Thanks, I'm subscribed to get notified once you upload.
This was very helpful! Thank you!
anjay makasih bang tutor nya, gajadi diomelin bokap grgr kunci pintu slek😅
Thanks for sharing 👍
Where did you get the plug shoe ? Very nice and small
Very cool, i have had hard time with these euro cylinders
Thanks, many other euro locks are harder because of the cylinder length and different cam mechanisms - it's part of the fun ;-)
@@Potti314 yes it is, i myself strugle a bit with my ruko's but i don't have the right tools yet, but the padlocks and mailbox cylinder's are easy
Very good information!!
Great video!!!
Thank you, glad that it was helpful.
i have a problem, when i removed the clamp and try to take out the plug the key got stuck in the cylinder and they both got stuck. Do i need to remove the second clamp or is my lock broken?
Thank you for shared!
How could you change the combo to change the lock. How would you match a new key?
What happened to the single ball bearing please?
Hi, would you use the same method if there were a ton of security pins in there?
Thanks for sharing.
Hi I was wondering were you got your spring holder from
Thank you, wonderful
Woooooooooow
Very very very gooooooooood
Great video.
Thank you.
Please how do I get the follower and pinning?
Would you give links Where to buy a pin kit in Europe?
Good job , thank you ....
Good job
Can you make a video where you install a button or a thumb turn to a cylinder lock please
very very good
Verry good
thks, good job
Very good tring
super potti. du bist mir eine super hilfe.
Vielen lieben Dank. Klasse, dass ich helfen konnte.
nice good job
Merci c'est bien expliqué .
Hello! What kind of nipper I can use for reinstalling the clips?
With the spring steel clips it's easy th-cam.com/video/xmi3_QwoqjI/w-d-xo.html But for these bendy ones, special pliers exit. But I'm not possessing these pliers so I'm just using two small screwdriver to tighten the clip.
@@Potti314 Ok, thank you! ;)
Is this pinning shoe home made?
Where to buy? (mine is inferior...)
It's from a locksmith but they don't sell these anymore.
amazing thank you for sharing
You're welcome - glad you stopped by.
Great video, I have been struggling to pick a full Euro cylinder lock,and would like to strip it down and reassemble it ,using only the key, (without having to pick it) thanks for the information
А как достать внутренность, если ключ не проворачивается? Возможно пин застрял.
Exceptionally clear and educational tutorial! I've got the locks, just need the tools, patience and a little prayer to gut them. 👍
Is the pinning shoe you used homemade? I'm curious to see if I can make something similar from my "scraps" collection. 🤔 I really need to get my hands on Dremel type tool.
Haha, don't pray too much, just try it. Old euro lock are not hard to find and are cheap. I've messed up one or two but that's part of the thrill ;-) Have a look here for a home brew pinning tool th-cam.com/video/KP-9SdKinzE/w-d-xo.html It's made from a windshield wiper blade.
I did it without any specialized tools,only a flatened spoke and grease to hold the pins.
To bad that rest of manufactures does not use spring steel c-clips. Nice work :-)
Very true; these spring steel clips are very easy to handle but most likely a few cents more expensive.
6:35 tools name pls sir
Nice
Thanks.
6 pin repinning where you can buy
Check HUK, Sparows and Peterson.
بسیار عالی 👏👏👏👏
Дуже корисні приспособи, буду знати, як зібрати сердцевину ключ-ключ. Дякую вам.
Goooood
Gooood
شكرا
Los vidio con traducción al español 👍
Sería muy bueno
فكرت رائعة
exelente tutorial hola hermano
Thank you.
@@Potti314 esa herramienta ke metes dentro del cilindro es de que medida es de 1/2 pulgada
Mantap coy
Except the tamil lagunitas sir thanks
هل البليه لها وضع ام عشوائ
رائع
فنااااان
gr8
I would like to send you a pic and see if can give me some advice?
الترجمه تحجب الرؤيه الكامله
شفت جنون تاع المفاتيح كيفه إديمانطي
Thanks for watching.
Как то ты легко удалил кольца-я два дня не мог и повредил корпус
فديو جميل جدا بس ياريت ترجمه عربي
I don't need to do this on my work
One of the funniest AI voice transcriptions yet - ELCA became a well-known Islamic terrorist group!
Mona Salama
Ini yang gua cari
Thinck
Ml
Ba bye
Haha :-)