This video only shows that you know how to use NX to certain extend, but more importantly does not teach anybody on anything . Video speed = crazy, comments = 0, audio = 0, guidance = 0. Well done!
Hello, When i try to extrude whole sketch is selected instead of some curve. Sketch is not extruding. I am getting error of " The input section is not valid." Please guide.
Ok so I found that when you click extrude a text box will appear in the ribbon that says "infer curves" change this to "region boundary curves" and then you can pick sections of the sketch to extrude
@@josephfeck3191 Fortunately there is someone that knows how NX works. Without this explanation I should never solve this problem. My question is: how could some people like that make a video tutorial, I've no words
i think you could have figured out by now. At the top you select single curve. there are variety of options in this drop down. You can understand them intuitivelly
This video only shows that you know how to use NX to certain extend, but more importantly does not teach anybody on anything . Video speed = crazy, comments = 0, audio = 0, guidance = 0. Well done!
th-cam.com/video/rC3e6mK7tZI/w-d-xo.html
Hopefully I can use this audio for my upcoming thriller shorfilm😂
Can you considerate speak in your videos? Is the best way for teach others, the different NX commands!
th-cam.com/video/rC3e6mK7tZI/w-d-xo.html
:ad có thể chỉ e cách xoay model như phút 19:54 được không ạ? tks ad nhiều
Ad có thể share các bản vẽ để mình xem mình làm theo không ?
Nguyennv1086@gmail.com
Được e nhé
@@CADCAMSOLUTION đợi mail từ a
Is anyone learning NX? ✌
im trying to learn
th-cam.com/video/rC3e6mK7tZI/w-d-xo.html
sorry may i know wht exactly name of this part and where this part function it??
Name of design plz
ko có bản vẽ ak
Can u tell me component name
th-cam.com/video/rC3e6mK7tZI/w-d-xo.html
I'm first drawing model in NX. ( I'm user the Inventor) But Nx very difficult sketch constrain..
Inventor daha kulanisli. Ve funktionlari daha kolay. Siemens NX 12 le calisiyorum. bir senedir. Inventor kulanmayi daha cok tercih edip seviyorum.
difficult why?
th-cam.com/video/rC3e6mK7tZI/w-d-xo.html
first, you need learn the software, and after have a presentation
th-cam.com/video/rC3e6mK7tZI/w-d-xo.html
Hello,
When i try to extrude whole sketch is selected instead of some curve.
Sketch is not extruding. I am getting error of " The input section is not valid."
Please guide.
Try timing the circle as he did to make the sketch parts independent
Same thing happens to me. An explanation of how only one section of the curve is being selected instead of the whole sketch would be nice.
Ok so I found that when you click extrude a text box will appear in the ribbon that says "infer curves" change this to "region boundary curves" and then you can pick sections of the sketch to extrude
@@josephfeck3191 Fortunately there is someone that knows how NX works. Without this explanation I should never solve this problem. My question is: how could some people like that make a video tutorial, I've no words
i think you could have figured out by now. At the top you select single curve. there are variety of options in this drop down. You can understand them intuitivelly
Its a tutorial why are you so fing fast ? Nobody gets along using NX the first time
solidworks is way better in everything
I think the same thing, in Solidworks we can do It in 3 minutes.
th-cam.com/video/rC3e6mK7tZI/w-d-xo.html