KOSO Mini3 Voltmeter, Clock and AirTemp on Honda Click 150i - Review

Ok goodbye sa lumang voltmeter! Say hello to Koso Mini3 the 3 in one voltmeter. Its a great product professional looking, accurate voltmeter and waterproof! highly recommended to those people who are looking for a voltmeter!
Cut and Dry - Electronic Hard by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommon...)
Source: incompetech.com...
Artist: incomphaha

[@SC8terRiderMotoVlogger]

Thanks for sharing, Ride Safe 😉

[@AkoMotor]

First paps. Pa shout out po

[@VidzMoto]

so next vids paps RCB Rotor Disk Video! maraming salamat!

[@eddyngadino2339]

Indonesia laguaguge

[@yolacmusic4456]

kamusta na po to ngayun ok pa din ba??

[@yolacmusic4456]

hindi po ba nag rereset yung time kapag pinatay mo ang motor

[@yolacmusic4456]

san po ba yung gray wire , sa always naka on ba un ilalagay?

[@deltafoxtrot5955]

sir pag hindi watercooled motor pwede di na ilagay temp sensor?

[@simonedc4282]

I made all the correct connections but compare the word "Err" in the display ... why?

[@DreiK96]

Hi, meron ako nabili from Shopee. AHIM Mini3. Parang ganyan din. Accurate yung Voltmeter pero yung Time napaka bagal. 1 minute nya ata ay 2 minutes in real time. May issue po ba kayo sa time accuracy ng KOSO? Saan nyo po nabili yan? Thanks

[@VidzMoto]

hi sir, yung sa akin di ko napansin, yung time di ko ginagamit mas gamit ko volt meter. baka delay talaga

[@jean-baptistel9261]

Hello, how to turn ON the back light ?

[@tukmolgaming2764]

Pano po iset sa 12hour clock format? Naka 24 kasi ung akin

[@VidzMoto]

Hi Sir naka default cya talaga a 24H format

[@nilocabailo8365]

how much the price

[@krbpln]

Ser bakit yung akin, minsan hindi bumubukas pag inistart ko mc ko, kailangan pang baliktarin uli yung fuse para may mag display uli sa screen nya

[@VidzMoto]

hi sir, yung red connect mo cya direct sa battery, then yung brown wire connect mo sa plate lamp mo or anything na dun naka connect accessories mo, kasi yun ang switch nya. yung black negative/ground. if hindi bumubukas baka may nag short or maluwag ang wiring mo sir. double check mo lang.

[@denisbersabal5920]

Paps pag off ung ignition switch. Mawala rin ba ang oras?

[@VidzMoto]

hindi ko na try paps, pero pag kakaalam ko ma rereset ang clock nyan pag hindi lagi naka connect sa battery

[@markkennethrobillos7947]

Panu yan paps pag naka off ang motor umaandar parin yung clock ng volt meter di kumakain parin siya ng coltage malolobat bat. Ng motor

[@VidzMoto]

hindi naman paps, sobrang maliit lang naman ang kinakain nya na voltage. kaya ok lang, wag mo lang hayaan na wag paandarin ang motor mo ng 1-2weeks. ma lolowbat yan lalo na kung keyless pa.

[@dadecalz7210]

parehas lng po ba sila sukat ng ordinary n vm

[@VidzMoto]

medyo malapad sir

[@joshuafajardo1410]

paps ask ko lang panu iset ng 12h lang un time nya?hindi 24h?thanks

[@VidzMoto]

sa pag kaka alam ko paps walang setting ng 12H format, 24H lang cya.

[@DreiK96]

Hi Gamer Joshua! Kumusta time ng voltmeter mo? Sa akin kasi mabagal yung time. Naiiwan ng real time. Thanks

[@satsaleh745]

ask for a red wire on a motor which pairs of wires

[@VidzMoto]

the red wire of the koso mini 3 should be connected direct to the batttery terminal, black is ground, the brown wire to your + auxillary wire or + in your ignition switch

[@satsaleh745]

tq

[@tokE-hi8rt]

@@VidzMoto What is a auxillry wire

[@markjosephdesilva1518]

Matibay po b ganan brand ng voltmeter

[@VidzMoto]

yes sir tumagal nman sa akin.

[@jericktiman155]

pwede po kaya sa mio sporty

[@VidzMoto]

yes sir pwedeng pwede

[@mamaorait700]

Ckp bhasa melayu la broo

[@reymartdelacruz5660]

D malolow at ang mottor papz

[@jeffuy458]

San mo nabili yan paps? Thanks sa Vid sub na ko

[@VidzMoto]

sa lazada paps

[@jeffuy458]

Hm po??

[@VidzMoto]

@@jeffuy458 nasa 1+ ata bili ko nyan sir sa lazada