Siemens S7-300 PLC analog input card wiring for SM331 7KF02/01 and its diagnostics. English

Siemens S7-300 PLC analog input card wiring for SM331 7KF02/01 and its diagnostics. For manual, related videos and part numbers please see below.
S7-300 CPU 31xC and CPU 31x Technical specifications / Wiring Manual: cache.industry.siemens.com/dl...
Where and when do you need peripheral addressing: support.industry.siemens.com/...
S7-300 Module data/Wiring manual: cache.industry.siemens.com/dl...
S7-300 Automation System, Hardware and Installation manual: cache.industry.siemens.com/dl...
Siemens Industry Mall: mall.industry.siemens.com/goo...
Patreon services: www.patreon.com/igselectronic...
Website: igselectronics.co.uk/
eBay store: www.ebay.co.uk/str/igselectro...
Linked in: / ingus-sudints-1b2a2517a

[@framos9991]

Thank You! Very helpful! 👍

[@adrian__4678]

Your videos are cool.

[@mdtahir5158]

Thanks sir

[@IGSElectronics]

Welcome

[@hetanhawke2354]

Thanks Mr

[@IGSElectronics]

Your welcome.

[@juliocesardealmeida2167]

@@IGSElectronics would you mind if you show us about S7-1200 PLC analog wiring and configuration???

[@ElectronicaProjects]

Hello
First, thanks for all your videos, great help :)
One question: Can I use 331 7KB02 analog input for measuring temperature with 4 wire SITRANS TS500 temperature probe?
I cant find any video how to add program block and how to measure the temperature
Thanks in advance!

[@pedroborges5203]

hello , how do you test the analog inputs of the 8x13 bit AI card of the s7-300 ? I have doubts which is the plus and minus of the analog input
Best regards

[@IGSElectronics]

My friend, the best i could explain is in this video. Sorry

[@sinanartemis6176]

hi sır
ı wanna ask a question
ı have the same siemens AIx8 analog card
ı wired 2 wire temp transmitter 4-20ma output ı configure it on simatic manager
i saw 6ma value in my multimeter on my input but ı saw -32767 value in my analog value what is the problem
ı wired transmitter as positif side to m+ and negative side to m- on analog card what is the problem

[@IGSElectronics]

When you see value of + or - 32767, you have no data coming in. Double check your wiring and configuration to make sure it matches of what you are trying to do. Please re watch the video's to see how 2 wire is done and how 4 wire is done.

[@sinanartemis6176]

@@IGSElectronics thanks for your explanation .may I ask another question if I use a temperature transmitter 4-20ma and its measurement range is- 50 to 250 on transmitter what must be my values for that number
0 to 27648 for -50 to 250
or
0 to 32767 for -50 to 250
or what is the rule of that kind of measurement pressure temp level etc