But the question is really good and not answered specifically through some example of exception. I tried and cannot find any exception with different cases. Please clarify
Well my friend you Open my eyes again. Two things one is losing the maximum strength of eyebolt by going Off center of the angle and two on the choker with the most tension. Working day in and day out as a heavy industrial rigger we only used engineers for the big lifts and that would be anything over 100,000 pounds. Stay thirsty my friend.
You're correct. Placing your hoisting equipment directly over the center of gravity before lifting is critical. This prevents the load from swinging as it's lifted. There are few exceptions where placing the rigging and hoisting equipment offset from the center of gravity is preferred, but use these procedures with extreme caution.
![โรงเรียนตอนตี 2 โคตรหลอน..!! [โรงเรียนไดเม่]](http://i.ytimg.com/vi/2MAEMwqVYh8/mqdefault.jpg)
Nice example and too the point.
Suggestion for using a swivel eye to get around the angle issue too👍
What steps to be taken for an unknown load to be lift?
How to find centre of gravity for unequal load if only total load is given and not separate load..
Why are the shackles the other way round there not the same way...Im learning thanks...just spotted it thats all
But the question is really good and not answered specifically through some example of exception. I tried and cannot find any exception with different cases. Please clarify
Did the basket hitch can ve calculated the sling tension?
Well my friend you Open my eyes again. Two things one is losing the maximum strength of eyebolt by going Off center of the angle and two on the choker with the most tension. Working day in and day out as a heavy industrial rigger we only used engineers for the big lifts and that would be anything over 100,000 pounds. Stay thirsty my friend.
It's not safe to lift load not onthe center of gr6
You're correct. Placing your hoisting equipment directly over the center of gravity before lifting is critical. This prevents the load from swinging as it's lifted. There are few exceptions where placing the rigging and hoisting equipment offset from the center of gravity is preferred, but use these procedures with extreme caution.