Main ny bhut se admi ko bevel halical k bary main pocha kisi ny nai btaya lakin apny meri bhut help ki allah apko seht wali zindagi de allah apko kamyabi de thank you sir
Measuring the angle of gear teeth is an essential part of gear manufacturing and inspection to ensure proper gear function. The angle commonly measured is the pressure angle, which is the angle between the tooth profile and a line perpendicular to the gear's pitch circle. Here are two common methods for measuring the gear teeth angle, specifically the pressure angle: Gear Tooth Vernier Calipers: Gear tooth vernier calipers are specialized calipers designed for measuring the pressure angle and other gear parameters. To measure the pressure angle with these calipers, follow these steps: a. Place the calipers on the gear tooth in a way that one jaw contacts the tooth's flank (side) and the other jaw contacts the tooth's top (crest). b. Read the pressure angle value from the caliper's scale or digital display. Gear Tooth Gauge: A gear tooth gauge is a specialized tool used for gear measurement. It typically has a profile that matches the gear's tooth shape, and it is used to check various parameters, including the pressure angle. To measure the pressure angle with a gear tooth gauge: a. Insert the gauge between the gear teeth. b. Ensure that the gauge profile matches the gear's tooth profile. c. Note the pressure angle value indicated on the gauge. These methods are suitable for measuring the pressure angle of external gears. For internal gears, you may need special tools and techniques, as measuring internal gear teeth can be more challenging. Additionally, you can use coordinate measuring machines (CMMs) and optical or laser-based measurement systems for more precise and automated measurements of gear tooth angles and other parameters. These advanced methods can provide accurate results and are commonly used in quality control and gear research and development.
Hello sir mere pass 8 teeth ka worm aur 41 teeth ka worm gear aaye hei iska calculation bata sakte he pith 18.85,aur OD he 60 mm hei.gear ka OD 268 mm hei.
The gear teeth angle refers to the angle at which the teeth of a gear are cut or shaped. This angle is also known as the pressure angle. The most common pressure angle for gears is 20 degrees, and this is often referred to as the standard pressure angle in gear design. However, other pressure angles, such as 14.5 degrees, 25 degrees, and 30 degrees, are also used in specific applications. The choice of pressure angle depends on the requirements of the gear application and the standards or specifications being followed. Different pressure angles can affect the performance and meshing characteristics of gears. The pressure angle is an important parameter in gear design, and it is typically specified along with other parameters like the module (for metric gears) or the diametral pitch (for imperial gears). The primary purpose of the gear teeth angle, or pressure angle, is to ensure proper and smooth engagement between mating gears. It influences the profile and shape of the gear teeth, which in turn affects how the gears mesh and transmit power. Properly designed gears with the correct pressure angle will minimize wear, noise, and backlash, while maximizing the efficiency and strength of the gear system.
Sir me straight bevel gear cutting karta hu mujhe abhi spiral bevel gear cutting karni he aapke formula se lead nikala to vo machine ko lead ke gear lagane ke kya
Main ny bhut se admi ko bevel halical k bary main pocha kisi ny nai btaya lakin apny meri bhut help ki allah apko seht wali zindagi de allah apko kamyabi de thank you sir
Allah apko bhi taraqqi day, ap try karo bana kar
Very helpful
Sir pls make a video about straight bevel gears formulas.
Ok
Helical beval gear (spiral gear ) ka angal kaise measure kre sir kyuki wo curve mai hota hai
Vernier hight gauge say pitch chek karo teeth ki lenth say divide karo tan ajay ga
Super sir
Thanks
how do we measure the teeth angle
Measuring the angle of gear teeth is an essential part of gear manufacturing and inspection to ensure proper gear function. The angle commonly measured is the pressure angle, which is the angle between the tooth profile and a line perpendicular to the gear's pitch circle.
Here are two common methods for measuring the gear teeth angle, specifically the pressure angle:
Gear Tooth Vernier Calipers: Gear tooth vernier calipers are specialized calipers designed for measuring the pressure angle and other gear parameters. To measure the pressure angle with these calipers, follow these steps:
a. Place the calipers on the gear tooth in a way that one jaw contacts the tooth's flank (side) and the other jaw contacts the tooth's top (crest). b. Read the pressure angle value from the caliper's scale or digital display.
Gear Tooth Gauge: A gear tooth gauge is a specialized tool used for gear measurement. It typically has a profile that matches the gear's tooth shape, and it is used to check various parameters, including the pressure angle. To measure the pressure angle with a gear tooth gauge:
a. Insert the gauge between the gear teeth. b. Ensure that the gauge profile matches the gear's tooth profile. c. Note the pressure angle value indicated on the gauge.
These methods are suitable for measuring the pressure angle of external gears. For internal gears, you may need special tools and techniques, as measuring internal gear teeth can be more challenging.
Additionally, you can use coordinate measuring machines (CMMs) and optical or laser-based measurement systems for more precise and automated measurements of gear tooth angles and other parameters. These advanced methods can provide accurate results and are commonly used in quality control and gear research and development.
Sir 30 degree ki fixed na given data with gear
Kindly send me question in english
Hello sir mere pass 8 teeth ka worm aur 41 teeth ka worm gear aaye hei iska calculation bata sakte he pith 18.85,aur OD he 60 mm hei.gear ka OD 268 mm hei.
G bata sakta hu apko gear ka kia formula or worm Ka kia size malom karna hain?
I will talk to you to day night
what is the teeth angle and used for
Already video available
The gear teeth angle refers to the angle at which the teeth of a gear are cut or shaped. This angle is also known as the pressure angle. The most common pressure angle for gears is 20 degrees, and this is often referred to as the standard pressure angle in gear design. However, other pressure angles, such as 14.5 degrees, 25 degrees, and 30 degrees, are also used in specific applications.
The choice of pressure angle depends on the requirements of the gear application and the standards or specifications being followed. Different pressure angles can affect the performance and meshing characteristics of gears. The pressure angle is an important parameter in gear design, and it is typically specified along with other parameters like the module (for metric gears) or the diametral pitch (for imperial gears).
The primary purpose of the gear teeth angle, or pressure angle, is to ensure proper and smooth engagement between mating gears. It influences the profile and shape of the gear teeth, which in turn affects how the gears mesh and transmit power. Properly designed gears with the correct pressure angle will minimize wear, noise, and backlash, while maximizing the efficiency and strength of the gear system.
Thank you sir ap bhut acha explain karty hai ma sha allah allah apko mazeed taraki de ameen
Apka masla solve hua??
Gear laga kar setting check ki???
@@shahidnisartechnicalinstru4854 yes sir thank you main ny gear complete kar diya alkhamdulillah thanks allot
@@shahidnisartechnicalinstru4854 yahan pictures sent nai hoti nai to apko sent karta
Aur bhi information gear k bary main ho to plz upload kiya kary
Assalamualaikum Mr.Shahid Amazingly very useful please explain how to determine the cutter number to use
Thanks utama
Waalikum assalam
Next video for you
th-cam.com/video/GF-AKwxMcrA/w-d-xo.html cutter number added check it
Nice sir
Thanks
Sir me straight bevel gear cutting karta hu mujhe abhi spiral bevel gear cutting karni he aapke formula se lead nikala to vo machine ko lead ke gear lagane ke kya
Sir aapne reply nahi kiya
Ap mujhay data send karay or machine ki lead BHI likh kar send karay
@@shahidnisartechnicalinstru4854 3 module 20 teeth sprial angle 35 degree. Machine lead 4tpi 40-1 deviding ratio.
20-20 equal gear matching means 45 degree pitch angle
Sir ! Muze bewel gears ka drawing ke sath calculation explain kar sakte ho kya please
Already video hain Play list main
Sir is ka module same halical ki tahra nikaly gy
G
Ap video par gor karo or formulas bhi malom hojay gay
Thanks
Iska module average dia say nilklay ga
@@shahidnisartechnicalinstru4854 mean normal module same halical farmula use kary gy baad main normal se real module nikaly gy
21 halical agle hai 50 teeth hai face angle 45 angle od 102 is ki lead aik dafa explain kar dy
Next week ap k is sawal ko solve karnay ki koshesh karo ga
Teeth ka angle 21 hain ????
Or ap k sawal main face angle 45 degree hain??? Ya bata day
Taper ka chota dia batao
@@shahidnisartechnicalinstru4854 g