I'm not a watchmaker but a retired railroad man and I love watches. To me, railroad grade watches are the penultimate movements. Thank you for the videos.
I’ve learned more about the “nitty gritty” of watchmaking from your channel then all the others that I watch combined. I love the fact that you show the finer details of balance poise adjustments, pivot work and tuning. As an amateur watchmaker, you’ve helped me figure out the “gremlins“ of a couple of vintage watches, that I would never have understood without your videos. Thank you, and keep up the great content.
G’day. I wouldn’t mind finding out a bit more about where you’re studying….I’m in the East of Canada and I’d like to inquire about classes, etc. Thanks….Mac
I love that you show up close the usage of specialty tools like the roller remover and staff remover. Everyone else tends to be hand wavy about these details but they're really helpful to other hobbyists who pickup tools that don't come with instructions.
I had a good friend that helped me learn to operate my steam traction engine nearly fifty years ago. He was seventy at that time, and carried a cherished Bunn Special, which he loved to share with others while explaining the fine points. This video was a chance to revisit Clyde again. Thank you. Good hands!!
My dad will be 92 on January 19th he went to Beverly Hills school of watch making. My brother is a general contractor and built a shop just for our dad to do all his watch repairs and cleanings. This is what my dad does as a hobby. He did not do it as a job but he has a lot of fun buying and selling Watches and clocks. Currently he owns three museum grade pocket watches probably worth 30,000 for the three of them if not more.! I enjoy watching your videos. Too bad you’re not in California I would introduce you to my father.
2:47 experimental and i've only done this on a large dial with a destroyed enamel (in other sections), but i've steamed a dial and then used CA glue under vacuum to fill the holes. Specifically, i slightly flexed the dial on a jig (probably less than a fraction of a mm of deflection) and used a tube under suction at the edge of the crack to suck some CA glue (extra thin type, white tinted). It works. The crack disappears at all distances but very, very close inspection. The steam cleans the crack and the white CA fills the void. But like i said, i've only tried this on a destroyed dial. I've yet to work the courage to try this on the dials i have in my collection from my family (which is why i've experimented). I'm still working on the idea and application, because for example, it's not uniform and you can see some minor variances.
Another enjoyable video! Just catching up on your pasr videos. Have this same movement in my modest collection and treasure it. Thank you for another well made video.
👏🏻👏🏻👏🏻 What an amazing job! It’s so satisfying watching someone thoroughly do their job well, showing both respect and passion for the craft. Wonderful work. If you’re up for another challenge… I’ve got a tricky pocket watch I need a repair/service for. 😁
Stumbled on your video about restoring an Illinois Bunn. You did a great job explaining the process. Just so you know I subscribed and will be looking forward to other videos to may create. I am new to the hobby so I am looking forward to getting involved. Thanks
Just recently decided to get into watches and decided to look into repair and servicing, i have an engine lathe and knee mill so i like thst kind of stuff. You machine parts and do serious work, my fav channel. Loved the hand vice trick, im watching and thinking to myself id put into a vise, lol.
Great work. Congratulation for the service to an exact working movement. I like american pocket watches. I also have Hamiltons and Illinois on my own. Wonderful watches. Greetings from Germany.
Beautifully done! I was holding my breath as you had to straighten out balance cock. It was such a great joy to see it immediately come to life later when the final assembly took place. Really enjoy your videos and your narration. Thanks for the history and background, as well!!
I always enjoy watching you work. BTW, the Hamilton 992B received from you last summer, still is doing excellent! Such a beautiful example of the true craftsmans work of art and time piece! Maybe after the years bills are finished, I still hope to get my other Illinois movements worked on!
A job well done. Your red peg is what I would call a spudger, it seems I can only get them in black and blue on this side of the Pacific. They get used a lot in optical cleaning and restoration.
Absolutely fantastic! I have a Bunn Special, the movement is dated around 1928 going by the number on the movement, it is my daily carry. It has been serviced but after watching this video I am now concerned as to how well this service was performed as it likes to run fast.I am a lover of the Illinois brand, I know there are better but this company was started in part to honor the history of Springfield in relation to Abraham Lincoln. My lineage has a relationship with Lincoln, plus the year of manufacture of my Bunn is the year my Father was born. I also have an earlier Illinois watch which is a key wind in a 3 oz coin silver case. You could kill someone with that monster! LOL. It needs to be serviced, it does run but not in all positions, I know that that is more than likely in the balance staff area. It has also been serviced but obviously not correctly. How can I get in touch with you? I agree, the sound of a correctly running watch is addictive. Thank you.
Stunning watch. To bad more of these haven't been kept. My grandfather carried a pocket watch for several yrs. Not sure what ever happened to the old ones he had.
Great video! It's an interesting watch. Beyond the prior watchmaking sins that you found and the modern display case, the gold colored (or plated) screws likely came from a lesser Illinois donor. The dial may have followed the screws as I don't think that design was offered on the Bunn or Bunn Special series. It's an interesting conglomeration that you have turned into a beautiful result. You made note of what your target was for run quality, and you did remarkably well on this one. It would be an interesting, if you started with a watch that had fewer sins, how close you could bring an equivalent movement (say a 17S Sangamo Special or Hamilton 950) to its original timekeeping spec. - that would mean it would still be worse than a cheap quartz watch but better than the best new Rolex!
If you go to the Crown & Stem bar you’ll need to “watch” yourself so that “time” doesn’t “tick” by. I know I know. If you stay too long your wife will have to come and convince you out of your slot at the bar. 😂
Thank You Chris... I do not take notes BUT I do watch and verbalize before you describe your next move. Slowly I do retain some knowledge. Not enough to dive into any of my pocket watches .... but, ha. Not foolish enough to actually do anything. Just a curious observer. 49+ years manual machinist. I have made a movement holder out of Delrin and other tools. HUGE difference from constructing the tools and correctly using the tools.... TM
come on you couldnt heat those two bridge screws to match all the others!?!? unbelievable!! lol Jk. This was great work. Would have been a nightmare for anyone with less experience to figure out the balance issues. Thank you for the video Chris!
Nice work overall but you should start checking the arbor hole for mainspring on the barrel bridge plate. You will begin to find that there's a lot of side shake on these movements due to severe wear here. Keep up the good work.
You do know that there is a guy what works on these watches as you do. The name of the channel is, you guessed it, ''BUNNSPECIAL''. 15:41 I have one of the L&R waiting to be refurbed. Oh, very satisfying and good craftsmanship performance.
Very Nice Work. What do you think of the case? I have been looking at them but never saw one in person. Interesting that the bridge screws do not match up with the other gold screws seems kind of common, maybe misplaced over the years? On the cases, I have been putting just a touch of oil on the threads, seems to help but who knows for sure. Always enjoy your videos.
Just Wonderful craftsmanship & most excellent work, witnessed by the timing results. One question, were the jewels in the pallet fork, diamonds ? Thank you for posting, a great tuition video.
Wow ! I had no idea synthetic white rubies were available way back then.Actually I also have this gorgeous movement, sadly minus case & dial, and in another few months I will tackle a makeover. Many thanks once again. Kind Regards.@@csspinner
One thing I noticed that I wanted to point out: When you were reinstalling the plate jewels I noticed that someone, I'm sure not you, had made "witness" scratches on the jewel settings and on the plate to keep them from getting mixed up. This is obviously highly discouraged (causing permanent damage to the jewel settings and plates) and not "best practice". Just thought I'd point that out so your audience would see "what not to do". Good video. Nice and clear and well explained.
Yea it’s a shame. I am a believer of “leave no trace”. It’s not hard to have a personal convention of how parts are organized in the cleaning baskets so one doesn’t lose track of which goes where
These high magnification lenses, man... They make it look like replacing that balance staff is a walk in the park. I bet is actually really difficult and fiddly.
I'm not a watchmaker but a retired railroad man and I love watches. To me, railroad grade watches are the penultimate movements. Thank you for the videos.
I’ve learned more about the “nitty gritty” of watchmaking from your channel then all the others that I watch combined. I love the fact that you show the finer details of balance poise adjustments, pivot work and tuning. As an amateur watchmaker, you’ve helped me figure out the “gremlins“ of a couple of vintage watches, that I would never have understood without your videos. Thank you, and keep up the great content.
Such a gorgeous piece. Thank you for erasing 100 years of wear, tear and abuse and restoring it to its former glory.
I’m a watchmaking student in Canada, your videos are well explained, not shitty! Awesome! I appreciate a lot! Helped me! 😊
Where are you studying in Canada?
I also would like to know, as a canadian trying to figure out how to get an apprenticeship/education in this field.
G’day. I wouldn’t mind finding out a bit more about where you’re studying….I’m in the East of Canada and I’d like to inquire about classes, etc. Thanks….Mac
I love that you show up close the usage of specialty tools like the roller remover and staff remover. Everyone else tends to be hand wavy about these details but they're really helpful to other hobbyists who pickup tools that don't come with instructions.
Very slyly gets his CITIIZEN Star Wars Rebel Pilot watch in the shot at 15:11...Show off! 😉😍
Jacot lathe! Not even shown when I was in watch school since they were not commonly available anyway.
I got one of that kind of balance staff filed on two sides . I have a Bunn special and it is the most beautiful movement in My entire collection .
I had a good friend that helped me learn to operate my steam traction engine nearly fifty years ago. He was seventy at that time, and carried a cherished Bunn Special, which he loved to share with others while explaining the fine points. This video was a chance to revisit Clyde again. Thank you. Good hands!!
My dad will be 92 on January 19th he went to Beverly Hills school of watch making. My brother is a general contractor and built a shop just for our dad to do all his watch repairs and cleanings. This is what my dad does as a hobby. He did not do it as a job but he has a lot of fun buying and selling Watches and clocks. Currently he owns three museum grade pocket watches probably worth 30,000 for the three of them if not more.! I enjoy watching your videos. Too bad you’re not in California I would introduce you to my father.
2:47 experimental and i've only done this on a large dial with a destroyed enamel (in other sections), but i've steamed a dial and then used CA glue under vacuum to fill the holes. Specifically, i slightly flexed the dial on a jig (probably less than a fraction of a mm of deflection) and used a tube under suction at the edge of the crack to suck some CA glue (extra thin type, white tinted). It works. The crack disappears at all distances but very, very close inspection. The steam cleans the crack and the white CA fills the void.
But like i said, i've only tried this on a destroyed dial. I've yet to work the courage to try this on the dials i have in my collection from my family (which is why i've experimented). I'm still working on the idea and application, because for example, it's not uniform and you can see some minor variances.
Thank you for restoring my Bunn Special. Awesome work, running strong and accurate.😊
fantactico tu trabajo , soy un aficionado antiguo ,very good
Another enjoyable video! Just catching up on your pasr videos.
Have this same movement in my modest collection and treasure it.
Thank you for another well made video.
👏🏻👏🏻👏🏻 What an amazing job! It’s so satisfying watching someone thoroughly do their job well, showing both respect and passion for the craft. Wonderful work. If you’re up for another challenge… I’ve got a tricky pocket watch I need a repair/service for. 😁
Thank you! Drop me a line cspinnerwatchrepair@gmail.com
@@csspinnerGreat. I sent you an email.
It is a pleasure watching you work.
What a great video! Thank you for sharing one of the greatest railroad movements in the history of American pocket watches!
Unbelievable beauty in all parts of the movement that owner rarely see!
Stumbled on your video about restoring an Illinois Bunn. You did a great job explaining the process. Just so you know I subscribed and will be looking forward to other videos to may create. I am new to the hobby so I am looking forward to getting involved. Thanks
Lovely watch! Thank you to the owner for sending it in, and thank you for showing us the service and repairs.
Just recently decided to get into watches and decided to look into repair and servicing, i have an engine lathe and knee mill so i like thst kind of stuff. You machine parts and do serious work, my fav channel. Loved the hand vice trick, im watching and thinking to myself id put into a vise, lol.
Those positional variances are amazing. Very well done.
Watching this at 3am, can’t sleep. Not helped my insomnia at all, far too interesting. All round great work again!
Great work. Congratulation for the service to an exact working movement. I like american pocket watches. I also have Hamiltons and Illinois on my own. Wonderful watches. Greetings from Germany.
Such a lovely timepiece. Nice work, Sir.
Really enjoyed this one. I especially enjoyed your Star Wars Rebel watch, ya big nerd! Awesome!
Random thing to say but those wheels are beautiful some of the prettiest ive ever seen
Good lighting and camera views ! Thanx a lot for popping this video up here. I got to see some tools/techniques I've never seen before. EXCELLENT.
Beautifully done! I was holding my breath as you had to straighten out balance cock. It was such a great joy to see it immediately come to life later when the final assembly took place.
Really enjoy your videos and your narration. Thanks for the history and background, as well!!
What a beautiful watch. And a very nice job cleaning it up. Thanks for taking us along 👍.
Thank you so much for sharing this beautiful video on the restoration of a wonderful watch:👍👌👏!
Magnificent, beautiful and detailed workmanship as usual Chris. Another great video.
I always enjoy watching you work. BTW, the Hamilton 992B received from you last summer, still is doing excellent! Such a beautiful example of the true craftsmans work of art and time piece! Maybe after the years bills are finished, I still hope to get my other Illinois movements worked on!
A job well done. Your red peg is what I would call a spudger, it seems I can only get them in black and blue on this side of the Pacific. They get used a lot in optical cleaning and restoration.
Beautiful watch and very good job.
Awesome work, as always!
When the Rex Roller Remover and the Angry Beaver Claw tools come out you know your in for a good show. Great work Chris. Keep well from New Zealand 🇳🇿
😊 thank you!
Every hour is "Happy Hour" at the Crown and Stem!!
🍻
Beautiful watch, and interesting problems to solve. You certainly get your money's worth out of that lathe. 😉
Very enjoyable, thank you!
Again, enjoyable and interesting. Great fun to watch.
Superb job as always ❤
Such a great looking watch. Excellent job on the balance staff and work on the main plate..An excellent timepiece and work done. Kudos...!
Absolutely fantastic! I have a Bunn Special, the movement is dated around 1928 going by the number on the movement, it is my daily carry. It has been serviced but after watching this video I am now concerned as to how well this service was performed as it likes to run fast.I am a lover of the Illinois brand, I know there are better but this company was started in part to honor the history of Springfield in relation to Abraham Lincoln. My lineage has a relationship with Lincoln, plus the year of manufacture of my Bunn is the year my Father was born. I also have an earlier Illinois watch which is a key wind in a 3 oz coin silver case. You could kill someone with that monster! LOL. It needs to be serviced, it does run but not in all positions, I know that that is more than likely in the balance staff area. It has also been serviced but obviously not correctly. How can I get in touch with you?
I agree, the sound of a correctly running watch is addictive. Thank you.
Drop me a line- cspinnerwatchrepair@gmail.com
I always enjoy your recordings; I wish I could have grandpa's watch restored to look like the one in this recording. Happy thanksgiving to you.
What a great Service - Thanks a lot !!
Beautiful piece. Thank you for showing
Excellent video. Thank you.
Stunning watch. To bad more of these haven't been kept. My grandfather carried a pocket watch for several yrs. Not sure what ever happened to the old ones he had.
Always a pleasure to watch. No pun intended 😂
the bluing on those hands is gorgeous. so many different colors.
Nice work. I'm enjoying seeing the little problems that some watches have acquired over their long lives, their causes and the solutions.
Great job refurbing a fantastic watch. Thank you.
Beautifully done! 😊
Awesome watch and repair!!
What a great job of servicing this watch! I especially like improving the look of the dial and refinishing the pivots, which looks crazy hard.
just a lovely watch, very nicely done, Tank you so much, it was a pleasure watching this.
🙏 thank you.
What a beautiful sound.
Great work on this time piece.
It's beautiful! Thanks for restoring it to its full glory. I bet Johannes was thrilled with the result.
The watch butcher got a hold of it at some point in it's life. Great job on a great piece !
Gorgeous watch, great video as always ❤️
Beautiful use of specialist tools... 👍🙂
Great video!
It's an interesting watch. Beyond the prior watchmaking sins that you found and the modern display case, the gold colored (or plated) screws likely came from a lesser Illinois donor. The dial may have followed the screws as I don't think that design was offered on the Bunn or Bunn Special series. It's an interesting conglomeration that you have turned into a beautiful result.
You made note of what your target was for run quality, and you did remarkably well on this one. It would be an interesting, if you started with a watch that had fewer sins, how close you could bring an equivalent movement (say a 17S Sangamo Special or Hamilton 950) to its original timekeeping spec. - that would mean it would still be worse than a cheap quartz watch but better than the best new Rolex!
Parabéns exelente trabalho profissional
Great skill and work. Lots of information and explanation. Excellent photography. Many thanks. UK.
Great video and history lesson, enjoyed the Illinois watch video.
If you go to the Crown & Stem bar you’ll need to “watch” yourself so that “time” doesn’t “tick” by. I know I know. If you stay too long your wife will have to come and convince you out of your slot at the bar. 😂
😂 🍸
Crown and stem great name for a bar lol. Like another name Get drunk and fall over..😂
outstanding results Chris 👌
Thank You Chris... I do not take notes BUT I do watch and verbalize before you describe your next move. Slowly I do retain some knowledge. Not enough to dive into any of my pocket watches .... but, ha. Not foolish enough to actually do anything. Just a curious observer. 49+ years manual machinist. I have made a movement holder out of Delrin and other tools. HUGE difference from constructing the tools and correctly using the tools.... TM
Bunn special watches are amazing works of art, for sure 📚✅
Fantastic job Chris
Your work and video production is awesome
Eine professionelle Reparatur welche wie ja zu sehen ist, große Erfahrung des Uhrmacher s bedarf. 🌟
Again, amazing work! The bending of that balance scared me😂 I dont think I would’ve done that myself.. I’ll leave that to a professional😊
Nice rebel alliance ana digi Citizen watch! And I am amazed by the patience you must have!
Amazing work!
Awesome service. You should have a lot more sibscribers
Another great video. Just never know what you’ll find do you. Even on the watches that look in good shape. Great job Chris
That's a beautiful watch
Great work. 👍👍
Great video and a nice watch... Greetings from Germany.
come on you couldnt heat those two bridge screws to match all the others!?!? unbelievable!! lol Jk. This was great work. Would have been a nightmare for anyone with less experience to figure out the balance issues. Thank you for the video Chris!
nice work
No se ustedes...pero para mi en reloj es mas lindo por dentro que por fuera!!!!!
Nice job
Nice work overall but you should start checking the arbor hole for mainspring on the barrel bridge plate. You will begin to find that there's a lot of side shake on these movements due to severe wear here. Keep up the good work.
Òtimo serviço , belo relògio , bom profissional, Graciez (Brasil)
Very Nice ~
You do know that there is a guy what works on these watches as you do. The name of the channel is, you guessed it, ''BUNNSPECIAL''. 15:41 I have one of the L&R waiting to be refurbed. Oh, very satisfying and good craftsmanship performance.
I love his channel. He was the first I began watching when I got into this hobby. He’s quite the character 😊
@csspinner boy,you said a mouth full,(buuuuuuurp!)
Very Nice Work. What do you think of the case? I have been looking at them but never saw one in person. Interesting that the bridge screws do not match up with the other gold screws seems kind of common, maybe misplaced over the years? On the cases, I have been putting just a touch of oil on the threads, seems to help but who knows for sure. Always enjoy your videos.
Thank you! The case you can tell isn’t of the vintage variety, but it looked nice and it’s hard to find authentic salesmen style nowadays
Nice.
Часовой мастер - дорогое удовольствие...исходя из стоимости используемого инструмента...😢😮
Great work. So... how was the client conversation afterwards regarding 'just a service please?' :)
Just Wonderful craftsmanship & most excellent work, witnessed by the timing results. One question, were the jewels in the pallet fork, diamonds ? Thank you for posting, a great tuition video.
Thank you! The pallet jewels (as with the other jewels) are all made of a synthetic ruby
Wow ! I had no idea synthetic white rubies were available way back then.Actually I also have this gorgeous movement, sadly minus case & dial, and in another few months I will tackle a makeover. Many thanks once again. Kind Regards.@@csspinner
You definitely need EXCELLENT eyesight for this kind of work!!!😮
Could the balance staff be polished to allow for smoother operation?
How do you determine the correct lift angle setting for the time grapher?
One thing I noticed that I wanted to point out: When you were reinstalling the plate jewels I noticed that someone, I'm sure not you, had made "witness" scratches on the jewel settings and on the plate to keep them from getting mixed up. This is obviously highly discouraged (causing permanent damage to the jewel settings and plates) and not "best practice". Just thought I'd point that out so your audience would see "what not to do". Good video. Nice and clear and well explained.
Yea it’s a shame. I am a believer of “leave no trace”. It’s not hard to have a personal convention of how parts are organized in the cleaning baskets so one doesn’t lose track of which goes where
Thank you very much Chris that was well organized and completed.
Very encouraging.. john
These high magnification lenses, man... They make it look like replacing that balance staff is a walk in the park. I bet is actually really difficult and fiddly.