[How to] Swap Single filament bulb socket to Dual filament for Switchback/DRL
ฝัง
- เผยแพร่เมื่อ 28 พ.ค. 2018
- Product Links:
Socket (2): amzn.to/2L8DWPU (33302-SR3-A01)
Connector: amzn.to/2LDYRLv (04321-sr3-308)
Connector WIres: amzn.to/2sj6lLO
Jdmastar 3030 1157 Switchback LED: goo.gl/onwE3M
Welcome to another episode of Diycarmodz. In this video I will show you how to swap out your stock single filament turn signal socket (1156) to a dual filament socket (1157) so you can wire up either parking light or the day time running lights (DRL).
The vehicle I'm working on is 2012 Honda Fit Sport which only comes with a single filament turn signal front socket. I will be swapping to 1157 to install switchback led.
***************************
Product Recommendation:
/ 2009166982666383
***************************
I can be reached via:
Facebook: / diycarmodz
Instagram: / diycarmodz
Google+: plus.google.com/+DIYCarMod
Email: diycarmodify@gmail.com
Mailing Address:
DIYCarModz
9051 Mira Mesa Blvd
#262321
San Diego, CA 92196 - ยานยนต์และพาหนะ
You the best exactly what I was looking for thanks God bless you brother 🙏🏽
THANKS! I didn’t know about the adapter but that helps!
So eye opening and helpful
like your clean work you do on wire harnesses
Awesome bro
Nice j0b,great vide0..thumb up👍🏼
You need 7443 wedge base socket or BAY15D /1157 socket to fit in dual filament bulb.
And you need to find common wire and main 2 wires for 2 filaments.
21w filament is for turn signal. 5w filament is for parking lights.
When you connect wires, remember you give only + line from turn signal wires.
Parking lights, you should give both + and - wires.
I did this to my car here in Sri Lanka coz I prefer how it looks in this old American style. Like in the movies I have seen.
I like how this video can't even be replicated entirely because no one shows how to make such a wiring harness. The items linked in the description is less than half of the things you need to replicate this mod without tapping into the oem wiring
Is there one of those harnesses for a 2017+ Chevy Malibu LT?
What will happen if we install single filament bulb by remove one wire in bike.
Do you have any Amazon link for that single filament holder..?
would that wire harness work on 07 honda fit TIA
Do they sell that adapter or did you have to make it?
Can you show how you made the harness
Could you make a video showing how you made your wire harness adapter
I also need this
Can I run a 7440 in a. 7444 socket? My car has a 7444 socket and bulb but doesn't use the parking lights on the turn signals, I have factory led daytime running lights on the bottom of the bumper. Can a 7444 switchback with wire do the trick? I hope it can work. Also a fuse tap harness too?
Can I use the 3 colors one Amber, white as DrL and blue at night?
Can i ask for a diagram of the harness?
Hello! 👋 can you do a video on how to replace a 2013 Honda Accord serpentine belt from what I can tell it’s pretty easy my baby is 2013 Honda Accord coupe with 55k miles.
Hello mate,
Do you have the link or name of this adaptor? (plug and play is the best than mess with cables)
Thanks (likes up)
Hello, I'm from Indonesia. I want to ask you something. I want to modify my turn signal on ge8 to be converted into a high beam. what should I do. .and I want to move the turn signal on the parking light .Thank you very much. sorry for my bad english
i have a turn signal problem also. the socket was ground and a power & bulb was 3157, I bout a socket with 2 wires also but can't make it work. what to do??
Is there something similar to this for a 2007-11 Honda CR-V? I think the bulb is a 7440? Even an adapter harness would help, I would imagine..
SoCalSai Gaming I was going to ask the same thing for my my 2010 Honda CR-V. The park light is a T10 bulb and the indicator uses a 7440 bulb.
Can you please review the new Xenon depot headlights. They company Cosme out with a new version (different from the one you reviewed) also, if you can review the retrofit source LEDS
For your Honda Accord
Thanks for the video was wondering about this.. The parking light for the fit seems pretty usless tho
I'm doing a retrofit headlight project for the Fit. GF wants to keep the DRL function so I'm doing this mod for DRL /Turn function.
Hi car modz was wondering if you help me with my car i baught a 2008 Honda inspire From Japan but everything with set is in Japanese dont know if you can help me get it in England am From ST.KITTS that is in the Caribbean??
How can I find a dual filament socket for my truck ?
Do you need a resister to prevent hyper flashing when switching out to LED?
Yes, you need to either change out the flasher relay ( if it is replaceable ) or install load resistor to prevent hyperflashing when changing out the turn signal bulb to led.
Is the new JDM led dual color? I'm trying to see how you got dual color from the new turn signal. White when powered on with other lights and amber when working as a turn signal.
Yew, you just need to purchase switchback led.
If you run a resistor to the white of the switchback led bulb will it dim the white light?
And would this dim the the amber signal light too?
Adding something like a 1500ohm 1/2watt resistors will lower the brightness. You have to add it per line. So you would need to add it for both the parking and the turn.
Do you sell the switchback wire harness adapters?
I can make them or provide you with the part numbers so that you can make your own. Email me @ diycarmodify@gmail.com
I have a 2012 Accord. Changed the rear turn signal to led switch back and only the amber comes on. It is a 7740 bulb. And way to make it work properly?
I have the same car , you don’t want Switchback in the rear because the white will stay on tha is no no for the cops 👮♂️ if you want the white color you have to do 7443 led 6000k white with hyper flash or separate 50w load resistor
Does the bulb automatically turn off the parking lights when u signal or did u have to modify that feature? I want to try this but I'm thinking the parking lights and the turn signals will be both be on making the turn signals hard to see.
Most switchback led bulb will turn off the parking light function and only have the turn signal on. This is done through the bulb not the vehicle. Some bulbs will have the parking light on constant and alternate between white and amber.
So since these are wired to the parking lights, they won't be on while driving correct? Is there a way to wire these so that they are on like DRL?
U can always draw a line from ACC or just look for 'voltage identifier drl switch' on Amazon or aliexpress.
Do you sell the the plug in play harness you made in this video?
Yes, I can make them. Email me diycarmodify@gmail.com
Email sent. Thanks.
I need this mod on my girls honda fit
Did you need a resistor for the switchback..
Yes, you will need resistors.
This should work on all ge8 I hope?
Yes.
Can you show me how to make the wire harness adapter
Hello sir I have some old clasic gm car product the thing is my blinker relay doing odd thing's for some reason bouth position light and blinker light go ON at same time and some time's in reverse other side get effected as well .
Why does that hapen?
I swaped 3 relays all of them doing different things but non solve problem.
I did change back lights design with newer version .
But wire harnest is still the same.
So I wonder what hapened to that odd thing.
I have 3 pin blinker relay by the way.
So I dont know how to solve this problem .
Aperantly I have as well those dual filament bulbs .
Can resistors ore diodes help?
And where do I put them ?
Most likely you have a grounding issue. A possible fix is to rewire a new ground wire.
@@DIYCarModz honestly I dont know I simply have fuel grade problems and mostly failure betwean wire harnest and alternator is back charging on me.
I like me fuel economy but dont know why that acuress for some strange reason I experiance higher voltage to me baterry around 15.5v .
So can I some how saftly add more voltage to centrain devices like ignition coil and simply bypass fuse box and regulators?
I do have voltage regulator in me dashboard and I do have aperantly polarity sensitive 4 pin gm ignition module I have mostly problems starting me engin in winter time.
I do have R terminal starter selenoid who I can by pass to ignition coil voltage.
But that thing confuse me because I have singel coil HEI E core type.
For some reason I did try to use wire and diode but still me coil wont fire me fuse pop's in fuse box.
So can you tell me please how to protect baterry not get effected from high voltage and how culd I find ore buy some device that can rev wrout bypass that problem with low voltage .
It is realy anoying pushing me car at winter time.
I did try some hv ceramic capacitor's but my baterrry was dead It did change me alternator starting charge rpm from 1200 to 2500rpm .
How can I prevent alternator to interfear with my ground /baterry?
Is it posibel to use diferent cinde of baterrys in series ore pararel configuration so they dont blow up?
Hey dude, do you live in San Diego?
Yes
DIY: Car Modz yeah I live in the North County want to do the door sill light up emblem but don’t want to attempt it since I’m prone to breaking my shit. You do any work if paid?
Why are both turn signals flashing?
I'm testing with the hazard.
@@DIYCarModz LoL
Kelly Davis in Macon GA 🦅👈🦅👈🦅👈🦅👈🦅👈🦅👈🦅👈🦅👈🦅👈🦅👈🦅👈🦅👈🦅👈🦅👈🦅👈🦅👈🦅👈🦅👈🦅👈