Fantastic job walking us through the job step-by-step. This is the first time I have tried to work on my car, and you made it very easy. Thank you sir.
Jello Jeffery! Thank you for sharing with us that our video was helpful and made your task easy. We know that by sharing videos with step-by-step are very helpful on fixing or replacing a car component and that is why we try to make them for others. Take well care Jeffery!
You are a great Teacher sir. Excellent camera work also ! Man that job looks like a pain in the ass !! I’ve done them in American cars plenty. I’ll take my Nissan to a Mechanic. Thanks Brother. Great job !
Hello Christian! First of all, thank you for taking your time to watch our video and we really appreciate your complement. We keep working hard to bring to you and our other viewers good info. Take well care Christian!
My service light came in today and ran the OBD. My thermostat just went and will be viewing this video again real soon so I can fix it. Thank you for recording and explaining everything
Hello Vidicated! Thank you for taking your time to watch our video and hope that this info can be of good help on your thermostat replacement. Take well care Vidicated!
May I know what code/clues you can see on OBD? My engine overheat with temp gauge at 75% breifely but no code on OBD. OBD read coolant max temp at 114·C but coolant temp returns normal at idle. No coolant lost so far.
Thanks for sharing the video mate. I've got an '02 Sentra SE-R Spec V with the same 2.5L motor as the Altima. Most repair videos regarding Sentra's are only for the 1.8L, so I often have to resort to Altima video's to get help. Now if only the cold weather would go away so I can change my thermostats, I hate working on cars in the cold, lol.
Hello Bill! Thank you so much for taking your time to share your comment that this video was helpful and for also letting us know that you liked the way we delivered the info. Take well care Bill!
@El Chano Jose Amazing video! It's one of the most detailed and professional videos I've seen in a while! Thank you so much. I have one question... while you are waiting for the vehicle to get to operating temp during the "burping process" should/can I turn on the heat or AC in the vehicle?
Put the HEAT on all the way to high and fan on the lowest setting. This makes sure all the coolant is flowing to your heater. Rev the engine to 2.5 and let it run for like 30 seconds. Do that a couple times. I even raised my car on front ramps during this process as air escapes to the highest point and that makes the radiator cap higher point. It helps get air pockets out easier. I used the no spill funnel kit and it makes it easier.
Hello Laurie! Thank you for taking your time to watch our video and for taking your time to share your comment that this video was helpful. Take well care Laurie!
@@elchanojose hello and you’re welcome, you deserve it for sure! Need to change it on my mom’s car and you make it look so easy, like I can do it in my sleep 😂.
Hello Greatest! I would do that, remove both thermostats. If the instructions on how to use this head gasket sealer specified to remove the thermostat, then I would removed them. If the thermostat is not removed, then this might affect the performance of this head gasket sealer to do it’s job. Always follow the product instructions on how to make it do it’s jobs so you don’t end up with a bad outcome. This products not always seal like the product claims to do but you need to follow the instructions. Take well care Greatest!
Ok I have a question I have the 2002 3.5 V6 and I'm seeing alot of stuff about it having 2 thermostats mines leaking around the top radiator hose on the bell hosing engine side hose is building too much pressure . I guess my question does the V6 have 2 thermostats
Hello Josh! The 3.6 is only equipped with one thermostat. If you buy the thermostat, it will probably come with the aluminum housing so you replace the housing and thermostat. I recommend you comparing prices from the dealer to the regular auto parts store so you can see if they cost the same or not. On this components, we recommend to use Nissan parts so you have more peace of mind with the part working more properly. Take well care Josh!
So I did everything that was shown in the video and got it done i just had trouble getting to certain bolts that are under the top thermostat why is the first one so easy and the back one just annoying? 😭 my hoses took like 15 min to get off.
Hello Vilma! By replacing only one thermostat, you are doing half of the replacement and that’s ok, but remember that if the small thermostat fails you can be in overheating problem. We are not saying that is going to happen for sure but it will help prevent an overheating by replacing both thermostat. Is like replacing brake pads, always replacing both pads per rotor and not just one. Over all, you could be ok but you have 50% of chance of a overheating problem sooner. Take well care Vilma!
After researching online, seeing conflicting videos, tutorials, and even diagrams that come with aftermarket replacement parts, I got ahold of a seasoned Nissan dealership mechanic who confirmed for me that BOTH thermostats in the 02-12 4cyl (qr25de) altima go COIL SPRING INWARDS (ie toward the block). This is a pretty critical determination I'd say, so please correct the content of this TH-cam video if and when you can!
I have watched four videos that show replacement of thermostats for 2001-2005 Altimas and every video I have seen show the thermostats in this video are positioned correctly.
@@billymatthews10 Well, I finally tracked down the official FSM for my '05 Altima, and sure enough, it has a detailed diagram showing, once again, both thermostats facing COIL TO BLOCK. So yeah, I'll be going with the official documentation on this matter, as should everybody else. This video should be revised or removed for propagating such dangerous misinformation.
@@zoinbergs I just replaced both of my thermostats on my 2005 Altima it's time to swallow my pride and say that you were right. Both thermostats springs were positioned with the spring inside the engine (pointy tip out). The thermostat at 10:44 is backwards from how mine was. You were right sir!
Hello! That hole is recommended to be at 12 o clock to help air move faster out of the engine, but if is not installed at 12 o clock is not going to cause damage or overheating. Is just recommended. Take well care!
Hello Brown! Just remember to check that you have remove the bolt on the bottom of the pipe. There is one 12mm at the front and one at the thermostat housing. Take your time when doing this so nothing can go wrong. Take well care Brown!
Someone please explain why they used 2 studs and 2 bolts to hold this on instead of 4 bolts?? Those 2 studs add more steps to this whole process and in my case a stuck bolt on that metal tube at the front of the block. 🤬🤬
Who knew there were two thermostats on a Nissan Altima 2.5 liter? Great explanation on how to repair it! Thank you 😊
Hello Cesar! Thank you for watching our video and we were surprised as well about two thermostats on this car. Take well care Cesar!
Fantastic job walking us through the job step-by-step. This is the first time I have tried to work on my car, and you made it very easy. Thank you sir.
Jello Jeffery! Thank you for sharing with us that our video was helpful and made your task easy. We know that by sharing videos with step-by-step are very helpful on fixing or replacing a car component and that is why we try to make them for others. Take well care Jeffery!
You are a great Teacher sir.
Excellent camera work also !
Man that job looks like a pain in the ass !! I’ve done them in American cars plenty. I’ll take my Nissan to a Mechanic. Thanks Brother. Great job !
Hello Christian! First of all, thank you for taking your time to watch our video and we really appreciate your complement. We keep working hard to bring to you and our other viewers good info. Take well care Christian!
My service light came in today and ran the OBD. My thermostat just went and will be viewing this video again real soon so I can fix it. Thank you for recording and explaining everything
Hello Vidicated! Thank you for taking your time to watch our video and hope that this info can be of good help on your thermostat replacement. Take well care Vidicated!
May I know what code/clues you can see on OBD? My engine overheat with temp gauge at 75% breifely but no code on OBD. OBD read coolant max temp at 114·C but coolant temp returns normal at idle. No coolant lost so far.
GREAT video brother!!! Nice and detailed you explained everything perfectly. Please do more videos.
Excellent video, thank you! More detailed than other videos on the same subject. I appreciate the point of caution that you include, very helpful!
Thanks for sharing the video mate. I've got an '02 Sentra SE-R Spec V with the same 2.5L motor as the Altima. Most repair videos regarding Sentra's are only for the 1.8L, so I often have to resort to Altima video's to get help. Now if only the cold weather would go away so I can change my thermostats, I hate working on cars in the cold, lol.
Thank you so much for making this video. Helped my family out big time!
Hello Andrew! Thank you for taking your time to watch our video and for sharing that our video was helpful. Take well care Andrew!
I will appreciate your answer Mr. Cano. Thanks
Thanks Jose. Great job!
Hello Gustavo! Thank you for taking your time to share with us that our video and info was well done. Take well care Gustavo!
El Chano Jose, Hell I didn't know my car had two thermostats. Thanks
Dont go to Auto zone because they only sell the box whit 1.
Oraylly sell the the right box whit 2 in it. For the same price.
Hello Scorpio1! Cars always have hidden surprises. Take well care Scorpio1!
Thank You my BROTHER!!! You very professional-----
Hello Bill! Thank you so much for taking your time to share your comment that this video was helpful and for also letting us know that you liked the way we delivered the info. Take well care Bill!
excellent and pertinent details, great video
Hello Jason! Thank you for taking your time to share that this video was well done. Take well care Jasón!
Great job and useful information my friend 👍🏼 great step by step video.
Hello Cruzito! Thank you for taking your time to watch our video and for sharing your comment that our video was useful. Take well care Cruzito!
Very clear instructions. Thanks so much!
Hello Chris! We are sorry for the late response. Thank you for taking your time to watch our video. Take well care!
Thank you for this video!! It was a tremendous help!
Hello! Thank you for taking your time to share with us that this demonstration was helpful. Take well care!
The best tutorial I've ever seen
Well done instruccions!
Lol well i guess we headed back to the store to get another thermostat. Thank you sir!
Worked perfectly thank you 🙏🏻
Hello OcReelz! Thank you for sharing with us that our video was helpful. Take care CoReelz!
Any advice I took the screws off and everything it’s just hard to get it off it’s like stuck on there10:56
Great video. but need to specify and torque the water pump bolts.
Wonderful video!! Thank you so much!!🌈✨🤩
Hello 101! Thank you for taking your time to write and share that your like this video. Take well care 101!
Thank you compa! I thought the normal operating temperature of these cars were lower.
Excellent video brotha!
Great job very well done. Thank you for your help...
Great Video Sir.
Hello Valencia! Thank you for watching our video and for taking your time to share your comment that this video was great. Take well care Valencia!
Thank you! This helped, good job!
Gracias directo al grano y cambiando los 2 no como muchos que solo cambian 1, sigue asi amigo
Que pasa si solo se cambia un termostato?
Por favor respondame, gracias 🙏
Hola, si solo cambia uno, el.problema que tenga va a continuar
great video!
Hello! Thank you for taking your time to watch our video and for sharing that you liked our info. Take well care!!
@El Chano Jose Amazing video! It's one of the most detailed and professional videos I've seen in a while! Thank you so much. I have one question... while you are waiting for the vehicle to get to operating temp during the "burping process" should/can I turn on the heat or AC in the vehicle?
Put the HEAT on all the way to high and fan on the lowest setting. This makes sure all the coolant is flowing to your heater. Rev the engine to 2.5 and let it run for like 30 seconds. Do that a couple times. I even raised my car on front ramps during this process as air escapes to the highest point and that makes the radiator cap higher point. It helps get air pockets out easier. I used the no spill funnel kit and it makes it easier.
Отличное видео!!!
Good simple explanation, thanks, just please if u tell your followers the thermostat are different one bigger one short, thanks
Nice job!!!!
Hello! Thank you for taking your time to watch our video and for sharing that you liked our work. Take well care!
Great video, thank you
Hello! Thank you for taking your time to watch our video and for sharing that you liked our work. Take well care!
Both the thermostats are the same?? Great job describing the work!
Great video!! Thank you
Hello! Thank you for taking your time to watch our video and to share that this is a great video. Take well care!
Which funnel did you use to burb the air out of the system? I had trouble finding on because of the cap size wouldn't fit.
Great video.
This is an excellent video, 😁👍, thank you!
Hello Laurie! Thank you for taking your time to watch our video and for taking your time to share your comment that this video was helpful. Take well care Laurie!
@@elchanojose hello and you’re welcome, you deserve it for sure! Need to change it on my mom’s car and you make it look so easy, like I can do it in my sleep 😂.
Great video !! Thanks
Hello Metalstorm2005! Thank you for taking your time to watch our video. Take well care Metalstorm2005!
I got the front thermostat in but one of the 12mm nuts on the side thermostat housing is stripped and I can't get it off. Any suggestions?
🎉 Your video is very helpful thank you
Hello Joshua! Thank you for sharing that our video was helpful. Take well care Joshua!
Are those two thermostats the same and interchangeable or are they only made to go in those place and thx
I'm trying to use head gasket sealer on my Altima which requires the removal of the thermostat. Does that mean I have to remove both thermostats?
Hello Greatest! I would do that, remove both thermostats. If the instructions on how to use this head gasket sealer specified to remove the thermostat, then I would removed them. If the thermostat is not removed, then this might affect the performance of this head gasket sealer to do it’s job. Always follow the product instructions on how to make it do it’s jobs so you don’t end up with a bad outcome. This products not always seal like the product claims to do but you need to follow the instructions. Take well care Greatest!
Ok I have a question I have the 2002 3.5 V6 and I'm seeing alot of stuff about it having 2 thermostats mines leaking around the top radiator hose on the bell hosing engine side hose is building too much pressure . I guess my question does the V6 have 2 thermostats
Hello Josh! The 3.6 is only equipped with one thermostat. If you buy the thermostat, it will probably come with the aluminum housing so you replace the housing and thermostat. I recommend you comparing prices from the dealer to the regular auto parts store so you can see if they cost the same or not. On this components, we recommend to use Nissan parts so you have more peace of mind with the part working more properly. Take well care Josh!
Do u know if a 2016 Nissan Altima have two thermostats as well?
great video great
work!
Hello Gusty! Thank you for taking your time to share your experience with our video. Take well care Gusty!
Gracias amigo
So I did everything that was shown in the video and got it done i just had trouble getting to certain bolts that are under the top thermostat why is the first one so easy and the back one just annoying? 😭 my hoses took like 15 min to get off.
What could happens if I only could replace the big thermostat but I could no open the area for the little one.?
Hello Vilma! By replacing only one thermostat, you are doing half of the replacement and that’s ok, but remember that if the small thermostat fails you can be in overheating problem. We are not saying that is going to happen for sure but it will help prevent an overheating by replacing both thermostat. Is like replacing brake pads, always replacing both pads per rotor and not just one. Over all, you could be ok but you have 50% of chance of a overheating problem sooner. Take well care Vilma!
Great job on this video
Hello SilenceBeat1! Thank you for taking your time to watch our video and for sharing that this video was well done. Take well care SilenceBeat1!
Good job
Thank you🙏🏼
Hala Gabe! Thank you for taking your time to watch our video. Take well care Gabe!
After researching online, seeing conflicting videos, tutorials, and even diagrams that come with aftermarket replacement parts, I got ahold of a seasoned Nissan dealership mechanic who confirmed for me that BOTH thermostats in the 02-12 4cyl (qr25de) altima go COIL SPRING INWARDS (ie toward the block).
This is a pretty critical determination I'd say, so please correct the content of this TH-cam video if and when you can!
I have watched four videos that show replacement of thermostats for 2001-2005 Altimas and every video I have seen show the thermostats in this video are positioned correctly.
@@billymatthews10 Well, I finally tracked down the official FSM for my '05 Altima, and sure enough, it has a detailed diagram showing, once again, both thermostats facing COIL TO BLOCK.
So yeah, I'll be going with the official documentation on this matter, as should everybody else.
This video should be revised or removed for propagating such dangerous misinformation.
@@zoinbergs I just replaced both of my thermostats on my 2005 Altima it's time to swallow my pride and say that you were right.
Both thermostats springs were positioned with the spring inside the engine (pointy tip out). The thermostat at 10:44 is backwards from how mine was. You were right sir!
@@billymatthews10 how did you figure out hes right?
@@codemajic8238 Diagrams from Nissan and my upper thermostat had never been replaced so it was in the original correct position.
Where can I find a thermostat housing for my Nissan altima 2006?
Excellent 👌
Hola Houston! Thank you for taking your time on watching our video! Take well care Houston!
Does the thermostat small. Hole have to be at 12 o clock if not what happens
Hello! That hole is recommended to be at 12 o clock to help air move faster out of the engine, but if is not installed at 12 o clock is not going to cause damage or overheating. Is just recommended. Take well care!
Thanks did one right at 12 o clock the one n front so no damage will occur awesome thanks again texting from Az. The Rez 😅
Thank you
Hello! Thank you for watching our video. Take well care!
Any ideas on trying to loosen the hard pipe @ 651mins? mine won't budge at all
Hello Brown! Just remember to check that you have remove the bolt on the bottom of the pipe. There is one 12mm at the front and one at the thermostat housing. Take your time when doing this so nothing can go wrong. Take well care Brown!
Do you disconnect the battery before this? Or no need?
Always disconnect the battery. You will be disconnecting electric connectors.
Perfect thanks!!
Hello Production! Thank you for taking your time to watch our video and support our channel. Take well care Production!
Someone please explain why they used 2 studs and 2 bolts to hold this on instead of 4 bolts??
Those 2 studs add more steps to this whole process and in my case a stuck bolt on that metal tube at the front of the block. 🤬🤬
I never knew it had 2 thermostats.... Why do they have to make it more complicated than it has to be??
Hello! More components to deal with and car makers just making it harder for us to work on cars when they break or just upkeep. Take well care!
thank you 👍👍👍😎
Hello James! Thank you for taking your time to watch our video and for sharing your gratitude. Take well care James!
thank you again keep it coming 👍🔥😎
This look easy bu I am scared to do it my self
😎💯👍🏻
Wonderful but ich way itscorrect on the water top herostategoes towads theegine
6:20
Great video. Thanks!
Hello Doyle! Thank you for taking your time on commenting that this video had good content. Take well care Doyle!