Great. I have 2x tesla batteries on my home but prefer to form factor and voltage of the BYD. Looking forward to the future videos detailing the setup. Thanks for your effort.
dala's tech with lilygo was the breakthrough needed in the ev/solar world. if you leave this outside hopefully you have the trailer tilted a little for water drainage.
Hi flying tools Have you consider to make the system off grid ready? In these uncertain times with two superpower leaders that are unreliable, could it become necessary
It is LFP battery. That chemistry is much safer than NMCD. Not burn at all. I must said, I'm not tested it yet. Did you think about bring battery to the garage? It is your decision I just asking. Btw. Good job.
Do You plan to explain more a bit? I have a 82,5 kwh.. now under the car, but I think it will be remain for here, to future use.. Do You use it in HV or LV system? ( as I know Your system is HV). Regards. Laszlo from Hungary!
Elnätsägaren är mer intresserad av växelriktaren. Försäkringsbolaget är dock mer intresserade av att veta hur och var. Den diskussionen har jag såklart redan haft med dem sedan ett par år tillbaka. Råder dig stark att prata med dem före du gör något. Lycka till med ditt projekt ☺️
I poll the Soc data directly from the BMS. No need to set the voltage then, just scale the Soc instead. That’s that good thing with a non crashed vehicle. I will talk more about that in another video.
Kul att du tycker det!! Har haft så väldigt mycket att göra med detta batteriet så det har inte hunnits med någon ”vettigare” film ännu. Men det kommer förhoppningsvis en framöver. 😅
Hi flying tools, looking forward to see more. I am right now looking for same solution. Question, the CANBus plug, could you give me some information how to get this plug. Maybe give me the partnumber, or wiring number?
Hi! Happy to have you here 😃 You will find all of that information in this link: github.com/dalathegreat/Battery-Emulator He is the developer of this stuff.
Hi flying tools, when do the next youtube session come? Question, the CANbus socket/plug to the battery to the left side of cooling. Can this be 3D printet and used with socketspins or do you have a partnumber so I can search and buy it somewhere on the web? I highly appreciate the answer. Thanks in advance.
Haha, Ja, vem kunde ana😅 Formatet och cellkemin blev avgörande☺️ Och ser man på deras erfarenhet gällande batteritillverkning så är de ju när på oslagbara😉 Tack snälla😃
Great. I have 2x tesla batteries on my home but prefer to form factor and voltage of the BYD. Looking forward to the future videos detailing the setup. Thanks for your effort.
Riktigt häftigt! Grymt jobbat! 👍
Tack😃🙏
looking forward to seeing how you connect this to your inverter. I've bought a crashed atto3 for the same purpose
Hi! I plan that my next video will be about just that.
dala's tech with lilygo was the breakthrough needed in the ev/solar world. if you leave this outside hopefully you have the trailer tilted a little for water drainage.
Yes it really was👍🏻
That’s a nice clean looking casing. 😛
Thats actually one of the things that made me go with this battery. Not the most important thing though 😅
Hi flying tools
Have you consider to make the system off grid ready? In these uncertain times with two superpower leaders that are unreliable, could it become necessary
Hi! It already is😉🔋
It is LFP battery. That chemistry is much safer than NMCD. Not burn at all. I must said, I'm not tested it yet. Did you think about bring battery to the garage? It is your decision I just asking. Btw. Good job.
Thanks! It will most likely be on the outside, but probably closer to my house. And yes, this battery chemistry is very safe👍🏻
Do You plan to explain more a bit? I have a 82,5 kwh.. now under the car, but I think it will be remain for here, to future use.. Do You use it in HV or LV system? ( as I know Your system is HV).
Regards.
Laszlo
from Hungary!
Absolutely, more informative videos is on the way, as soon as i can. HV only. Communicate directly with my inverter.
Hur fungerar den lagliga delen av att koppla in en modifierad batterilösning på elnätet?
Elnätsägaren är mer intresserad av växelriktaren. Försäkringsbolaget är dock mer intresserade av att veta hur och var. Den diskussionen har jag såklart redan haft med dem sedan ett par år tillbaka. Råder dig stark att prata med dem före du gör något. Lycka till med ditt projekt ☺️
What voltage did you set for 100% charge?
I poll the Soc data directly from the BMS. No need to set the voltage then, just scale the Soc instead. That’s that good thing with a non crashed vehicle. I will talk more about that in another video.
Coolt!! Det där vill man se mer av!! 🤩😃
Kul att du tycker det!! Har haft så väldigt mycket att göra med detta batteriet så det har inte hunnits med någon ”vettigare” film ännu. Men det kommer förhoppningsvis en framöver. 😅
Ooh! Coolt! Var köpte du det batteriet? Pris?
Kul att det uppskattas. 😃 Vill ej namnge vilket företag, men i Sverige och via bildelsbasen☺️ Pris på allt kommer i en film framöver.
Supper! How can we find and buy some batteries???
Hi, www.bildelsbasen.se
Hi. Tried to watch your latest video but TH-cam says "This video is private".
Yes I have to do some editing regarding the safety. It will be uploaded in a few days. Thanks for your interest☺️
@flyingtools Ok. Thanks for the update. I'll look out for the new upload. 👍
Hi flying tools, looking forward to see more. I am right now looking for same solution. Question, the CANBus plug, could you give me some information how to get this plug. Maybe give me the partnumber, or wiring number?
Hi!
Happy to have you here 😃
You will find all of that information in this link:
github.com/dalathegreat/Battery-Emulator
He is the developer of this stuff.
Hi flying tools, when do the next youtube session come?
Question, the CANbus socket/plug to the battery to the left side of cooling. Can this be 3D printet and used with socketspins or do you have a partnumber so I can search and buy it somewhere on the web?
I highly appreciate the answer. Thanks in advance.
Awesome......👌
Thanks, glad you like it 😃
🤔jag som trodde du skulle
Skaffa ett kia Batteri😂😂.
Men det där blir ju också bra😜. Ser redan framemot nästa film 🎥😎👍
Haha, Ja, vem kunde ana😅 Formatet och cellkemin blev avgörande☺️ Och ser man på deras erfarenhet gällande batteritillverkning så är de ju när på oslagbara😉 Tack snälla😃