He glued without testing it first. Not very smart. One should plug the display, turn it on to test, if its working, turn it off again and then glue it.
@henrique paiva i have one question, does it matter if the broken display have been turned off before removing? I mean, it couldn't be turned off since the touchscreen wasn't working. And when testing the new one, it didn't turn on (but the phone was on already since i could hear the volume buttons)
NEVER EVER touch an unprotected adhesive stripe with your (always greasy and dirty no matter what) fingers! It renders the stripe useless or at least A LOT weaker. Plus you must test the screen first, not use a metal blade...
@@Cristi.30 that’s because it was not there to start with, looks like this screen was not the original, it was also missing the original adhesive at the back of the lcd panel, which makes the a fake repair video.
ESD gloves when working with delicate electronics such as mobile phones. I know this due to repairing Sony Mobile phone's in there repair centre in the UK. Had to even wear ESD wrist straps that was grounded and some on our shoes aswell.
Why do you use metal tools unnecessarily and interfere with the central frame? A simple plastic card or a similar tool is enough for this. And A sharp knife? He's just good at big grooves in the frame
Interesting how you only applied adhesive to the ends of the phone and not to the side or to the back of the LCD screen. When I went to replace the battery on my J5 2017 - the screen portion was glued to the area around the back of the battery and when trying to remove the LCD screen - it cracked. So had to get another screen on top of the battery that was being replaced.
Здравствуйте. Везде пишут что galaxy j5 2017 на две симки. А у меня на одну симку. То есть на слоте, где карта памяти, стоит перегородка. У кого ещё такое есть отозвитесь??? И можно ли доставить шлейф, чтобы подключить другую симку?
Why did you say it in the picture of video it was for a sm-j530fn if it's says A5 at the beginning of your video that's a bit misleading however I did still watch it and liked the video as it was informative and hopefully the same way to do the J5 thanks anyway.
I recently installed one and I have a question how can you fix the issue where there is a gap between the screen and the bezel of the frame. If you try to put pressure down in it you will risk cracking the screen. Which I have experienced. Someone told me that this is just how the aftermarket screens work they have a space in between and it is sitting down flush on the frame. Is there anyway to fix the space because I’m thinking if the phone were to be exposed to any water rain etc it will easily go into the phone. So should I fill up the gap with a lot of the b7000 adhesive? To block the spacing? Which then again will make the repair look untidy.
If that happened to me I would use clear silicon on it. That way if done correctly you will make it water tight a day it will still be able to be removed in the future should you find this necessary. Just a thought as to what I would do if this happened to me sorry it has happened to you.
Without a commentary there is nowhere near enough information here to actually do the job. For example: on using the heater, how hot, what kind etc? What's with the glue? Where can I get the necessary?
My display is also broken can you please send me the link...in ebay there ate alots of options my mobile is exectly the same you as yours. Please send me the link
My mobile screen was broken. i have repaired the mobile and opened. But the mobile close for sometimes and i can't see in the mobile screen. Help me plz!!
Long time since you posted the comment, but this can help others. I bought the LCD TFT first, not AMOLED, and it was a piece of garbage. It's 0.5 mm more thick than the amoled, so for me was impossible to glue it properly on the phone, light was coming from the sides of the phone. Some of this TFT screens can't manage bright adjustments either, so, I ended up buying the AMOLED screen, just 20€ more expensive that TFT on EBay. I'm going to glue it now, let's see what happens haha.
@@jedward3503 With AMOLED screen it just was smooth as silk. Some B-7000 glue and ready. Only bad thing about the screen I bought is that the brightness adjustment was too short, and too bright even when at minimal brightness, but my client was satisfied. Sorry if I didn't explained very well, but I'm not an usual English speaker/writer
E il 3 video che vedo, tutti con la musica di merda. Ma non potete parlare? Avete perso l'uso della parola? Anche perché se e un video che spiega dovete spiegare. Cosa usare per scaldare, quanto scaldare, quanta forza usare, che colla usare, dove fare attenzione ecc.
![เป็นไปได้ไหม - WanMai [Performance Video]](http://i.ytimg.com/vi/Eh5hItD4Mr0/mqdefault.jpg)
He glued without testing it first. Not very smart.
One should plug the display, turn it on to test, if its working, turn it off again and then glue it.
He probably known the state of display...
@@stefanovicrastko so? He's supposed to make a tutorial, so the person who watches will do the same and fucking it up if the display is broken.
@henrique paiva i have one question, does it matter if the broken display have been turned off before removing? I mean, it couldn't be turned off since the touchscreen wasn't working. And when testing the new one, it didn't turn on (but the phone was on already since i could hear the volume buttons)
@@stefanovicrastko grdo
Why am I watching this my screen works
funny
Does it still work?
😂😂
mine broke for the second time ... idk if im going to fix it again
just in case or to fix other screens, replace
All that heat gun process thing ...I just took It off with my nail lol...😂🥰
Not profesional
@@monarchus1614 it was my phone so I didn't care... But if it was sm else's I would do it the normal way ofc..😄💖
@@-_-pan96-_-45 oh XD still be careful doing cuz u could had injured yourself or damaged phone
@@monarchus1614 I'm always careful .. No injure or damage has ever happened to me ... I'm really careful...🥰💖
@@-_-pan96-_-45 good 😁
Nice Video Thank you verry much,you helped me when I tought that my phone couldn't be repared I could repare it,by your help
Thank you verry much
How can you do that plz tell me my mobile screen also not working
SUBSCRIBE ME PLZZ😔
NEVER EVER touch an unprotected adhesive stripe with your (always greasy and dirty no matter what) fingers! It renders the stripe useless or at least A LOT weaker. Plus you must test the screen first, not use a metal blade...
Is it possible to do this procedure without wiping data ?
The very video I was looking for thanks bro😊
SUBSCRIBE ME PLZZ😔
Forgot to put the plastic cover over the cable point
Big oof
@@Cristi.30 that’s because it was not there to start with, looks like this screen was not the original, it was also missing the original adhesive at the back of the lcd panel, which makes the a fake repair video.
not smart at all.also unglued and remove the old screen with a blade !
really!.use a plastic card it is morre easy and safe
ESD gloves when working with delicate electronics such as mobile phones. I know this due to repairing Sony Mobile phone's in there repair centre in the UK. Had to even wear ESD wrist straps that was grounded and some on our shoes aswell.
Why do you use metal tools unnecessarily and interfere with the central frame? A simple plastic card or a similar tool is enough for this. And A sharp knife? He's just good at big grooves in the frame
what is the name of the tool you used over the screen before u took it off(a heater)?
a heat gun
www.amazon.co.uk/dp/B082D6R8ZY/ref=cm_sw_r_other_apa_i_AHN2EbMXY6JK4
Hair dryer
LORD
LORD
Thanx for the video...
Got a lot out of it.... 💚
can anyone tell me what kind of adhesive would work best for this job
3M
Can I heat the panel with a hair dryer?
yes
What glue have you used please ?
And are we obliged to heat the screen before removing it ??
the glue is B-7000 and yes you have to heat before removing. BUT you shouldnt use the glue cause the new screen has strong doublesided tape
Anyone knows how the black tool he uses in the beginning is called?? (At 0:30)
Hello may I ask if what type of glue is being used and where can it be bought?
It's probably glue B-7000 you can search for it online
Use 3m biadesive tape, not glue
What's that you applied with the tube? Some kind of glue? What is it?
Sperm
Interesting how you only applied adhesive to the ends of the phone and not to the side or to the back of the LCD screen. When I went to replace the battery on my J5 2017 - the screen portion was glued to the area around the back of the battery and when trying to remove the LCD screen - it cracked. So had to get another screen on top of the battery that was being replaced.
sir where did you bought that lcd may i know please? 🙏
Samsung galaxy A5 screen replacement?
My j5 opens with white logo . 😥
Can you do it only by a hair dryer?
I just did. Worked.
Did the phone gonna reset when i will replace the whole screen ?
Szymon kinda late but no
yes make backup
@@benwork1811 lmao no it will not
I have a problem i was change the skreen bat it dazent work i was done all as i seen in the video.
Здравствуйте. Везде пишут что galaxy j5 2017 на две симки. А у меня на одну симку. То есть на слоте, где карта памяти, стоит перегородка. У кого ещё такое есть отозвитесь??? И можно ли доставить шлейф, чтобы подключить другую симку?
what kind of glue do we do?
??? im looking for this answer 2
Please can I have the characteristics of the tools you use please?
What type of glue do use for sticking screen in place
omfg thanks soo much
W
SUBSCRIBE ME PLZZ😔
Can you tell me the temperature with you Rehot 100° C or > ? This video is for A5 also if the j5 is the same
this IS a j5
@@JustA.Person how many degrees?
First test display...animal!!!
Ahhahhha true!
Thank u bro...
Why did you say it in the picture of video it was for a sm-j530fn if it's says A5 at the beginning of your video that's a bit misleading however I did still watch it and liked the video as it was informative and hopefully the same way to do the J5 thanks anyway.
Great video, l had the confidence to change my screen after watching it. New screen off ebay £18. What is the background music? Anybody know?
I liked the music too
I recently installed one and I have a question how can you fix the issue where there is a gap between the screen and the bezel of the frame. If you try to put pressure down in it you will risk cracking the screen. Which I have experienced. Someone told me that this is just how the aftermarket screens work they have a space in between and it is sitting down flush on the frame. Is there anyway to fix the space because I’m thinking if the phone were to be exposed to any water rain etc it will easily go into the phone. So should I fill up the gap with a lot of the b7000 adhesive? To block the spacing? Which then again will make the repair look untidy.
think the screen is bigger, maybe try to file it with a nail file and make it go better in its housing
If that happened to me I would use clear silicon on it. That way if done correctly you will make it water tight a day it will still be able to be removed in the future should you find this necessary.
Just a thought as to what I would do if this happened to me sorry it has happened to you.
Without a commentary there is nowhere near enough information here to actually do the job. For example: on using the heater, how hot, what kind etc? What's with the glue? Where can I get the necessary?
Sabe me dizer si a câmera do j5 serve no j7 neo?
where did you buy lcd screen?
i need one for my samsung j5 2017.
i've tried ebay, but no luck so far
you"ll find it on wish.... it cost something about 30€ and it works...
@@princeofpersia4768 have you bought one yourself? is it good and which one did you buy (original, oled or tft)? thanks.
@@JustA.Person Yes, I bought the OLED and it is very good quality screen.Don't buy the TFT most people complain about their quality.
@@princeofpersia4768 okay thanks, I ordered an OLED one too
do u even need to use the glue b 7000? or can u just put the lcd on like dat
you need the glue/extra tape else the assembly comes out soon.
thx bro i love u
From where did you buy the screen from
ט
Hi ,
könnten Sie bitte mir sagen, ob wie die Kleber heißt .
whats that gun like thing you used at the beginning of the video???
Its a heat gun.. using it to heat up the glue thats holding the screen to the phone housing so it can be removed easier.
@@RETRONuts yes, and it can also be done with a usual hair dryier, if it is a stronger one ofc.
My display is also broken can you please send me the link...in ebay there ate alots of options my mobile is exectly the same you as yours. Please send me the link
This touch is inside to lcd screen ?
Will this fix purple spots on my J5???
Yes
But they turn green
@@lukedeane9776 what?
My mobile screen was broken. i have repaired the mobile and opened. But the mobile close for sometimes and i can't see in the mobile screen. Help me plz!!
Thanks pal worrked a treat
WHY the glue ?!?! :s
hey I have a question and although you can send me links to the tools and the display I need that I have important things on my phone
U can buy them on Amazon and if you're looking for phones u can get them on Ebay
What temperature do you used the heat gun?
500 grades celsius,but you can use a hairdryer,it is almost the same,I used and it worked
@@stefan.5036 lol u will melt the plastic... 100 degree is enought
no need to add b7000 glue
Where did you buy the display from?
It can be bought online,or trought a shop
Can u replace a amoled j5 with a lcd screen
Long time since you posted the comment, but this can help others. I bought the LCD TFT first, not AMOLED, and it was a piece of garbage. It's 0.5 mm more thick than the amoled, so for me was impossible to glue it properly on the phone, light was coming from the sides of the phone. Some of this TFT screens can't manage bright adjustments either, so, I ended up buying the AMOLED screen, just 20€ more expensive that TFT on EBay. I'm going to glue it now, let's see what happens haha.
@@luispene7886 What happend?
@@jedward3503 With AMOLED screen it just was smooth as silk. Some B-7000 glue and ready. Only bad thing about the screen I bought is that the brightness adjustment was too short, and too bright even when at minimal brightness, but my client was satisfied. Sorry if I didn't explained very well, but I'm not an usual English speaker/writer
link for buy the display pls
how to set the hot air temperature ?
temperature 150 to 180°c
Sir how to buy samsung galaxy j5 prime display with lcd .please tell me sir
eBay depending on your country
You dont show how to remove electrical connection to screen
Is that glue nessesary?
On intro is Samsung A5 2017 and it is j5 2017
😂
can u plz give me the link for the screen
samsung galaxy j530f in price plz
hello do you put the glue sideways?
Giuseppe Silvestro no
On j5 isn’t necessary
should always check if the screen works rooky mistake. amateur
Nice video, keep up. ;)
So nice Inset in j5 pro it is working sar
How much does an original touch screen cost? Please answer me.
About 70-100€. But you can buy one for like 20€ or less on websites like aliexpress.com
@@helios8626 is not quite AMOLED screen as the original one. is more TFT
Where do I buy the screen?
Ebay
How much price bro display
How much does it takes
Whats the glue you use?
Glue B-7000
@@MOBILESERVICE123 where can i buy the display from link pls
Thanks in advance
the cover black?
Nice bro
What is cost of this lcd
What kind of glue is that?
adesive glue
price of lcd tell me soo
It's not LCD actually... unless you bought a fake screen...
what glue is he using?
Glue B-7000
Это не J5, а A5 нуб. Дизлайк
no its a j5 нуб
شكد سعر الشاشه How many dollars
E il 3 video che vedo, tutti con la musica di merda.
Ma non potete parlare? Avete perso l'uso della parola? Anche perché se e un video che spiega dovete spiegare. Cosa usare per scaldare, quanto scaldare, quanta forza usare, che colla usare, dove fare attenzione ecc.
does this guy not know about fast forward????
no need fast forward we need to watch job done right
Zajímavé
Only Lcd price..
Mera mbl ki srf Lcd Dmg hue ha...
Toch bilkul Sahi ha..
Lcd kitni price. Ha.
Plz..
Hello
This DISPLAY type Super AMOLED, it's lcd+touch complete
price
plz...
Sir i want a display Plz can you give me i can pay for the display
Vídeo malo,....no le pone ni ni el protector de la clavija de pantalla , majo vete a la playa
Op bro
Jeeeze fast forward mate
fine
How much is it
Dsplay Price $70
Wow e tel care am comentat cu el
بهتر بود وقتی میخوای تاچ واکنی بایک پاسور وا میکردی
What is the glue?
J5 is samoled not lcd
Depends on your model.
Most models have lcd
i m bored fr😭
👍👍👍👍👌🤘
Hoi
Ye mine destroyed much worse than this
Vau😁😂😂
ক