2021 Lifted Chevrolet Colorado Z71 Mods
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- 2021 Chevy Colorado Z71 Crew Cab Short Bed RWD in Satin Steel Metallic.
Fuel Tracker Wheels www.fueloffroad...
Fuel Gripper AT Tires 265/70/17 www.fueloffroad...
Maxtrac Spindle Lift Kit maxtracstore.c...
Rhino Bed Liner liners.rhinoli...
Gator Floor Mats www.amazon.com...
Tyger Running Boards www.amazon.com...
Tyger Tonneau Cover www.amazon.com...
Chevrolet Tailgate Letters www.amazon.com...
Colorado Badges www.amazon.com...
Z71 Badges www.amazon.com...
V6 Badge www.amazon.com...
Interior LED Lights www.amazon.com...
AVS Window Deflectors www.amazon.com...
![[FULL EP.73] เปิดบ้าน 70 ล้าน "แป้ง Zbing" ยกมาทั้งญี่ปุ่น l เคหสถานบานปลาย l One Playground](http://i.ytimg.com/vi/YBnJhTt07Pg/mqdefault.jpg)
Dude your build looks amazing! I was hesitant to get one, but after watching this I think I’m going to make the move! Thank you!
Thanks man appreciate that! It was fun. and relatively easy coming from a total novice!
Your vent visors are meant to give you the option of outside ventilation without getting wet if it's raining, or if you're looking to keep the wind down. They're great if you smoke lol (I don't), but I do like leaving the windows cracked for my dog, assuming it's not hot out.
I drive a 2019 chevy colorado LT 2WD. Also yes not a lot if content for the Rado community. Good to see more Rado enthusiasts. Keep up with the content.
Appreciate that! You got a nice looking rig as well. Cheers !
@@jesse_d yes. It gets me to the areas I want and still performance parts are stock. Little by little is the way I'm going.
Nicely done. I really like the Z71 emblems on the bedside.
The good ole Amazon special
Ahh yes the ole Tried and true they got everything on there a tale as old as time.
Looks great! Are those 265/70/17s a 31, 32, or 33 inch tire? The wheels looked big and bold but I can't tell if it's from the rims liking out!
Yes 265 70 17 just about 32 with the aggressive tread!
Thank you Jesse! Do you remember the offset on your rims? They have a perfect poke out of the wheel well without too many crazy rock chips getting impeded into the paint.
Bruhh this is a winner ! Can’t wait to get mine for sure .. only preference is just the baby duramax.
Thank you ! Duramax 😍so much fun !
Truck looks good. The Maxtrac spindles are great. I also installed them on my '18 Colorado LT Redline Edition extra cab RWD. Coupled with a 2in. rear block, Readylift upper control arms and sway bar drop brackets. Also have the Eibach 2.0 front coilovers and rear shocks. The stock Redline 18in wheels have 265/70-18 Toyo AT3 tires with a 1.25in BORA wheel adapter/spacer.
Hell yeah! Solid setup
Truck is badass man! Great stance and that front grill is mean
The perfect set up 💯
Nice build and looks awesome. I just got my first truck 2023 Z71 and was looking into this type of build. Was thinking 4in lift but think I'm going with a 6in instead.
I have the 2022 Z71 4x4 same color, ( I love the color). I also took off the door chrome "COLORADO" and replaced it with the "Z71" GM Plate, same in channels, same fender flares, same black bowties. lol Truck looks great. I am thinking of taking off the tailgate "COLORADO". I also added the Black Tailgate letting.
Sweet looking ride. I have a 2022 Z-71 4x4 Midnight edition on order. Expecting it in October.
That things gonna be sweet !
Beautiful truck.. are you running any wheel spacers or is that poke coming from your new rims being offset?
Thanks for the view and the comment! I’m not running wheel spacers . Poke is coming from the offset (1) of the new wheels and the wider tire. I had the spacers on for a total of one minute before I decided it was way too excessive.
This truck is awesome oh, great ideas keeping it two wheel drive making it simple. Looks very professional give it a 10
I love your Colorado I jus mid of last year bought a very low mileage 2018 Colorado ZR2 these trucks are awesome hope to see more
Love the truck. I wish I could trade my ‘16 for a ‘21. I have the ‘16 Z71 4x4. 3.6L. I’m thinking of changing my grill to the ‘21 grill. Of course I have added other mods. Auxbeam controller for my ditch lights, chase lights, light bar. I’m ordering a roof rack next month. I have a tonneau cover, LED cab lights and led license plate bulbs. Dash cam. I took off my fender flares and plan on ordering Air Design Super Bolt fender flares. I want to put a leveling kit. Etc etc.
Beautiful truck bro
deflectors stop rain from dripping into your cab off of the roof
As you can tell by my comment we don’t get a lot of rain in socal haha
I didn't know you could get the Z71 trim in 2WD. I have a 2017 Z71 4x4 but here in Winnipeg with our winters the 4x4 is nice to have. I'm wanting to go ahead with a 4" lift, just need to find the time to do it. Nice clean look on your truck though!
Yes much to my surprise I found a RWD Z71 ! had to travel about a hundred miles to find one in stock but it was well worth the short trek. Haha yea here in so cal even the truck itself is a bit excessive. I say go for it !
@@jesse_d I'm putting the z71 emblems on my 2022 wt just for looks lol
Thanks for the video,
Nice truck 👍🏽
Love the Colorado, I own the zr2
I was able to fit 285/70/17 w a 2” leveling kit. Other than that it’s a nice truck bro. Good video.
Thanks
thanks dude! I kinda regret not going 285s but believe it or not the sales person told me my lift was no big enough... it deff is haha maybe someday down the road
I was thinking a 2inch level on mine as well. I heard the suspension is a little rough with that is that true? And my buddy just recommended those same size wheel and tires for mine.
Might have to go with this tire size (285/70/17) but I’ll be going with a 4in lift.
@@jesse_d I think if I remember correctly with a 6" lift on the Z71 you have to trim a fair bit of the front bumper. The ZR2 style bumper is open so no trimming required
thanks for sharing you can defitley fit larger tires then your 32s im on a 4.5 lift and 34s with no rubbin
Sweet setup! Get those 34"s on there!
Hi Jesse, Your Colorado looks great! Do you happen to remember which Bed Mat you bought on Amazon? I also have a 21' Z71 Crew cab with the 5'-2" bed and love the truck. I'm putting a Putco Venture rack on mine for my kayaks and gear. (Roof tent maybe if I win the lottery;) Thank you for the video and links
very cool ! that thing is gonna look sweet with the kayaks and I know what you mean about the rooftop tent :( haha maybe one day..
www.amazon.com/Dee-Zee-DZ87009-Heavyweight-Bed/dp/B00OLVGEJA/ref=sr_1_3?content-id=amzn1.sym.d3f43d11-fd5a-4179-8b1e-1a03d11e07f4%3Aamzn1.sym.d3f43d11-fd5a-4179-8b1e-1a03d11e07f4&crid=1FSKPQR8O0MVY&keywords=rubber+bed+mat+colorado&pd_rd_r=9bb2f1fe-cbbb-4cd8-9df7-2ce2c35ee820&pd_rd_w=8G6jj&pd_rd_wg=08Ui0&pf_rd_p=d3f43d11-fd5a-4179-8b1e-1a03d11e07f4&pf_rd_r=H73KBW8DY65VHPGMYDRX&pid=ahUNStG&qid=1670222488&sprefix=rubber+bed+mat+colorado%2Caps%2C370&sr=1-3&ufe=app_do%3Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840&vehicle=2021-47-2484-434-224-53-6-7-21858--8-1-2835-209-&vehicleName=2021+Chevrolet+Colorado
Awesome truck! I just have trouble with the stupid “Chevy lean”. I like those avs things too, I’m gonna copy you 😅
the big Z71 Offroad badge comes with the midnight editions... my midnight edition colorado had the z71 offroad badging from the factory... not blacked out tho... and no badging on the side of bed... I was actually at the dealer for a used silverado... but the blacked out midnight colorado just grabbed my attention
Looking really good. Just need the spider taillights smoked. That will make the rear look sick.
That is such a nice truck holy shit
dear God that thing is clean
Much appreciated!
Thx for posting. Sweet build.
AWESOME VIDEO!! Bro I know it’s an older video but I have a 2019 LT model 2wd and Wow I would like the same lift n wheels n tires and etc !! With labor and all parts etc what was the estimated cost for Everything ? Your truck really looks dang good and and stands out for sure ! 💪🏻👍🏻
Dude thank you! Inflation may have added to the price of these things but id say my largest expenses were obviously the wheels tires and lift about 3k (lifting a 2wd much cheaper than 4wd) and another $300-500 in installation & alignment. Rhino Liner $450 bed cover was like $200 Side rails $250 and then the little touches of customization $50 bucks here and there. I spaced everything out over a year. (i put links to everything in the description)
If i could go back and change one thing I would recommend a 4 inch lift not 6. other than that go wild !
@@jesse_dok I’m not real tech savvy 😂 where is all the links n etc ?
Looks great!
the gray and black looks great
Thanks !
My 2022 same z71 cam this the red v6 and filled in chevrolet backing
what lift kit and inches do u have on that beautiful truck.
Just pruchased a 2022 at4 canyon
Nice looking truck!
What kind of tries do you have on the ride. they look awesome.
They are fuel gripper AT tires. i pit the link in the description! Thanks 🙏🏼
Looks great bro !!!
Appreciate it bro thank you !
cool deal bro ....i have the same truck but mine is the diesel option with a tons of power
Nice truck!
Sick truck 🏔🛻💯👌🏼
On the front you need a black and chrome z71 badge on the grill
Truck looks great 👍
Nice truck man 👍🏻
Dude that thing is sweet
Nice work !
Thanks for sharing this video bro. I like the way you lift your truck more aggressively. I have the same model and year z71 black. My question is how’s the driving if you are in the freeway. Is it the same with stocks use to be? Cuz I’m planning to lift my truck too. But your truck looks cool. 👍🏻
Thanks ! Tbh I didn’t notice a huge difference in handling. The footprint also remains relatively the same. I did the work little by little and didn’t notice any major driving differences. I live in the city so I don’t get on the freeway much but when I do I can still get 20+ miles per gallon if I’m not driving like an asshole haha. If you are switching out your tires for something with more aggressive tread you will notice a little bit of road noise but nothing a good song can’t tune out .
@@jesse_d - Cool, thanks for your response. 👍🏻
@@albertpas5564 i have the eibach pro truck kit stage 2 lifted 4,5 and has better handling in my opinion then stock due to the sronger spring rate i reccomend you get c load tires and not e it will make the ride terrible
@@TheKdog40000 Thanks for your tip. I do appreciateed. 👍🏻
I would like to see an update video on the truck if you’ve done more to it since this video!
Also, do you mind sharing the link to the hitch shackle you have?
@@connorlevandowski8362 www.amazon.com/gp/product/B07MBZ1L8B/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
@@connorlevandowski8362 i've got a couple more mods in the works. ill deff post it when its ready. thanks for the Comment and view.
How did you get the stickers off? I'm not a fan either. I've thought about swapping my grill out and changing the chrome badges to black. Your truck looks great.
Used my girlfriends hair dryer for the emblems and the bedside sticker just peels right off little bit of rubbing alcohol to get off the excess sticky stuff.
Very nice build
Thanks!
Very nice truck.. I love it.. I almost went with a 2wd but here in Florida and things we do there's alot of sand so the 4x4 helps.. I just picked up a 2021 Colorado 4x4 not a z71 but I still like it
.basic but nice truck and it's this same gray color which is beautiful.. I'm gonna black it out like you have yours.. thank you for the video.. btw your grill did you paint the center black? Mine is all black like that but the front middle car with the Chevy logo is chrome on mine
Nice man hopefully these links help ya out! Blacked out looks awesome
On the “steel metallic”
The grill is all stock. The z71 comes with a black Chevy logo, BUT you can totally paint it or they sell vinyl covers I believe.
@@jesse_d ok cool I'll look into that before I paint it lol.. it will definitely be black soon.. keep making videos.. I might start doing some to when I do my build to help others out.. there's not enough Colorado videos on TH-cam like other trucks
I see you have a pretty high lift, do you think a 2 inch level would be able to fit 265/70/17 tires?
I think you would need a tad bit more of a lift to accommodate an aggressive tire tread… if the tires are more all season/ low profile you might get away with it.
Truck looks great! No spacers or anything for the wheels?
Thank you ! Yep no spacers just wider stance with the new setup.
Link for the tow hook please! TIA! Awesome 🛻 🔥
Are you gonna put 33’s on it ?
I have a 2019 z71 4x4 in graphite gray
Look's cool, good job
Very nice. Well done !
Thank you !
So just to triple check. This is the 6.5 inch MaxTrac? Do you still enjoy it?
If I could go back and change it I would only lift it 4 inches (unless you’re planning on getting 33s you might need the 6 inch!)
The lift is fantastic no lean super easy to install.
The link is in the description of the video !
Nice looking truck.
Sweet truck.
Love it!
Did you need coilovers for this lift or did you use your stock suspension
Stock front with new rear shocks (included in the kit)
Would your method of lifting the truck (the maxtrac thing) work with a 4WD model? Also would 34 in tires fit (I think that corresponds to a 295/70/r17)
33‘s fit no problem I don’t see an issue with 34s as long as you’re not running any wheel spacers. Unfortunately no spindle lifts Will not work on a four-wheel-drive :( you have several more lift options though!
Hey just curious what is your gas mileage for city and highway with your set up? I have a 2 inch leveling kit on my 2019 Colorado and noticed mine dramatically went down.
My average is 14 but That’s mostly city… my best is 23 on the highway. Cheers !
at the end with the truck running it sounded like it had more noise to it did you do anything with the exhaust?
No sir! all stock. I’ll agree mine sounds more beefy than most…,
Hi, @Jesse Almanza. I like several of the mods you’ve made. Thanks for sharing. I just purchased a used 2019 Colorado Z71 4WD. I am really pleased with the ride of my truck, but have already made a few mods to make my truck more user friendly for me, including installation of: i) engine skid plate, ii) truck bed cap, and iii) upgraded off-road tires. I want to remove the air dam, but that’s a bear of a project on the 2019. I also agree 100% that the chrome Colorado emblem looks better black. I don’t understand how to remove the emblem, though. Is it stuck on with adhesive or clipped into the door? How did you remove them without damaging/scratching the paint? TIA for your response.
Removing the letters were a lot easier than expected first I framed it off with painters tape so that I could get the exact same angle when putting on the new ones. I used a hair dryer to loosen the adhesive on the lettering (you can use a heat gun if ya got one) and a plastic pry tool to pop them off. I used a paint friendly mineral spirits to remove the gunk left behind. Replacing the lettering was as easy as peeling off the back and lining it up with the painters tape I had set down before removing the chrome ones
I have seen people straight up cut off the air dam leaving about an inch or two behind still gives you the clearance and the look you’re going for without having to hassle underneath the vehicle recommend that if you plan on throwing it away anyways and have a steady hand!
Best of luck thanks for the view and comment
@@jesse_d Hmmm. Cutting it off is actually not a bad idea. Thanks for sharing that tip. I’ll search videos to find one that showing the cutting approach. Jigsaw, I’m guessing. Hmmm. Wheels are turning now. Thanks, again!
Oh! And thanks for th explanation re: removal of the letters. I’d likely have ended up one of those who put new letters on all wonky. The painters tape is brilliant and a hair dryer/heat gun is so easy sounding! Hoorah!
@@jesse_d
RoadTripLover
0 seconds ago
Oh! And thanks for th explanation re: removal of the letters. I’d likely have ended up one of those who put new letters on all wonky. The painters tape is brilliant and a hair dryer/heat gun is so easy sounding! Hoorah!
I have a 2019 as well and all I did was use a sawzall and cut all the pins right off
Nice!!
Thats tough.
You have a "spray in" bed liner.... why you need the Rhino liner at all?
Nope ! She came brand new off the lot with just a paint job. bedliner was necessary.
Nice work what is the offset on your wheels?
+1
What is the offset for those wheels?
+1
@@jesse_d ok, stupid question. Is that +1, one inch?
@@juliancastanedaphotography From what I understand offset is measured in millimeters I got that information from my wheel manufacturers website
Trucks are not “investments”. Trucks are liabilities. Even if it’s fully paid off it costs you money to own and operate and doesn’t bring money in. There is no situation where a truck or car is an asset (investment).
All right dude well thanks for the view !
Got a 21 GMC Canyon and did a 2inch level. How does the 6inch do with casual driving power down the highway??
Power is still there 🤠
How much is it pay for the rubber piece behind the tailgate that you got from Amazon
Think it was about 75$ price is way up right now though :(
You have wheel spacers right? Do they effect your turning much ?
Thanks! Actually no wheel spacers don’t need em there’s actually plenty of poke from the new wheels and tires. Turning is no problem.
@@jesse_d thank you for replying
where did you get the fender flares
The dealership installed them. their GM
That’s cute truck
Thanks I agree ☝️
How does your suspension ride?
Rides pretty much like stock. Thanks !
Any tire rub up front?
With this set up, none at all, if you introduced a wheel with a different offset or had spacers on I can potentially see some rubbing happen
Is it just me or does he sound like he’s asking a question every other sentence. Other than that nice truck.
It’s just you ? Thank you!
Is that a long bed?
It’s a short bed 5ft ish I think
I bought a 22 4×4 wish I would have got the 2 drive
I feel ya haha I’ve gone back-and-forth with myself on this.. sometimes I wish I did but then again like I said never had any problems putting around the dirt with this thing. Enjoy your truck!!!
Why you wish 2wd now?
@@loganchaney5981 dont understand that they would want a 2wd! I only have the 4x4
Do you have wheel spacers on it?
I don’t ! I had them on when I was running the stocks but this new setup didn’t feel like I needed them. 2 inch spacers borderline had some rub on the new fuel tires
I have a 2021 Z71 as well. Stock 165/65/17. The wheel wells stick out half an inch further than the wheels. Thought about spacers. However your 165/70/17’s look perfect. Or, is it your rims?
Thank you for the reply.
@@gregschmaltz3609 really happy with the way the wheels and tires turned out had the perfect amount of “poke”
I will say, though, when I was running wheel spacers on the stocks, it looks pretty legit!
As far as which wheel/ tire combo to go is entirely up to you, I think it the poke has less to do with the tire size and more with the offset of the wheel you choose !
Looks good except for the window gutter vents, they're for old people
Ahhhhhhhhh shit. I didn’t see that advertised on the box! You think they will take them back if I show em my ID?
@@jesse_d I'm 69 and my wife won't let me put them on my truck
It doesn’t make sense to lift a 2WD truck. Also, why put Z71 (off-road) badges on a 2WD truck?
It makes sense for me! I go off roading all the time. Thanks for the view and comment 🙃
@@jesse_d Well, enjoy it. Good day, sir.
I hate the side steps you lose grownd clearance with those they hang below the frame
Then don’t get side steps 👍🏽
@@jesse_d I already did but Monday amazon is getting them back and kiss my asshole
But trucks are supposed to have 4x4.
I don’t see why if you only drive in the city!
Very nice video, thanks for posting. #1 place for online marketing P-R-O-M-O-S-M!!!
Looks great!