Lightweight concrete made of cement limestone aluminum powder for peb buildings thermal insulation

แชร์
ฝัง
  • เผยแพร่เมื่อ 9 พ.ย. 2020
  • Non autoclaved lightweight aerated concrete recipe you can find here www.pioner-group.com/concrete/
    Combination of light gauge steel frame with non autoclaved lightweight aerated concrete insulation www.pioner-group.com/technology/
    Non autoclaved lightweight aerated concrete is a type of lightweight concrete which is used to produce blocks and replace bricks. NAAC is lighter then conventional concrete. It is formed by using portland cement, fly ash, limestone, aluminum powder and water. Aerated concrete has a good strength, durability, good thermal and sound insulation. Dry density of this material ranging between 600 kg/m3 to 1600 kg/m3. Non autoclaved lightweight concrete blocks can be used for housing and commercial purposes.
    We have developed a unique non autoclave lightweight aerated concrete recipe and can achieve densities from 250 kg/m2 (even less) with perfect compressive strength, thermal and sound insulation.
    PIONER GROUP supply lightweight aerated concrete infill for cold formed steel construction technology infill and we can supply dry mortars (plaster, floor screed, self leveling compound, lightweight aerated concrete dry mix etc.) production line with a good price and speed of delivery.
    Cold formed steel, also known as light gauge steel or LGS, is deployed worldwide for structural framing, in buildings of all sizes and purposes. These include multi-story projects, meeting engineering compliance to local design and building codes and to last as long as any building erected using traditional materials.
    There is a misconception by some that cold formed steel (CFS) should only be used for interior framing or non-structural building elements - but that’s not the full extent of its capabilities.
    Far from it. CFS delivers many advantages in the construction of structural, load bearing walls as well.
    Cold formed steel, also known as light gauge steel or LGS, is deployed worldwide for structural framing, in buildings of all sizes and purposes. These include multi-story projects, meeting engineering compliance to local design and building codes and to last as long as any building erected using traditional materials.
    Because CFS, with the help of technical software (like, FRAMECAD STRUCTURE), can be engineered and designed to be load-bearing, and because of its unique physical characteristics, CFS makes for a superior structural framing material.

ความคิดเห็น • 78

  • @j.eribeiro8563
    @j.eribeiro8563 ปีที่แล้ว

    Esse calcário é o mesmo agrícola?

  • @andrebraithwaite5891
    @andrebraithwaite5891 2 ปีที่แล้ว

    I am looking for sum advice on my new progect

  • @m12345ft
    @m12345ft 2 ปีที่แล้ว +1

    Is this more or less cost effective for making cladding , blocks, and panels, compared to aerated concrete? Does it weigh more or less than aerated concrete?

  • @ideasytnow
    @ideasytnow 3 ปีที่แล้ว +1

    how does the limestone react with the cement and aluminum powder?

  • @oyetundesaheed8976
    @oyetundesaheed8976 2 ปีที่แล้ว +5

    Can someone try a replacement of the limestone powder with rice husk ash?, if possible, What could be the result of such in terms of compressive strength, workability etc of concrete form.

    • @cellularlightweightconcret1499
      @cellularlightweightconcret1499  2 ปีที่แล้ว +3

      Yes you can replace it. Compressive strength depends on density. For 700 kg / m3 it is around 3 MPA

  • @amerrashed6287
    @amerrashed6287 3 ปีที่แล้ว

    How much maximum size of wall panel I can get out of this mix? How long should I wait to get it dry?

    • @cellularlightweightconcret1499
      @cellularlightweightconcret1499  3 ปีที่แล้ว +3

      We use two sizes: 1.2 meters x 0.6 meters x 50 mm thickness and 0.6 meters x 0.6 meters x 50 mm thickness. Needs around 6 - 7 days to get required strength

  • @PrimalS0ul
    @PrimalS0ul 2 หลายเดือนก่อน

    The mix sounds exactly like the AAC component, but I assume in different ratios and without the steam oven curing process. Can you refer me to test results, particularly regarding structural strength, compression, fire resistance, and insulation properties? I'm considering applying this technology in a residential villa.

  • @m12345ft
    @m12345ft 2 ปีที่แล้ว

    Does this have the same insulation value and water proofing as aerated concrete?

  • @shoibbasha5320
    @shoibbasha5320 3 ปีที่แล้ว

    Is this fire resistant ?.. can be replaced with Fire wall ??

  • @rina.B1
    @rina.B1 2 ปีที่แล้ว

    انه رائع جدا

  • @ktsherpa1
    @ktsherpa1 ปีที่แล้ว

    nice

  • @oyetundesaheed8976
    @oyetundesaheed8976 2 ปีที่แล้ว +5

    For someone that is planning to mix this manually, what advise would you give him in terms of
    (1) the mix ratio,
    (2) how and when to add aluminium powder and
    (3) how to determine the quantity of aluminium to be added?

    • @cellularlightweightconcret1499
      @cellularlightweightconcret1499  2 ปีที่แล้ว +1

      www.pioner-group.com/concrete

    • @davidwootton683
      @davidwootton683 2 ปีที่แล้ว +2

      One recipe that I obtained from The British Concrete Institute was 1 gram of Al2 to 1 kilogram of pure Portland Cement. Mix to a free poring slurry, (with water). You can add fine silica sand. I think this was not more than 25%. Limit the rise to not more than 36". You will have to do tests. Also your moulds must be waterproof. I hope this is of help.

    • @annamarialouisamorsner4571
      @annamarialouisamorsner4571 2 ปีที่แล้ว +2

      @@davidwootton683 I am from South Africa. Could you tell me what is AI2?

    • @davidwootton683
      @davidwootton683 2 ปีที่แล้ว

      @@annamarialouisamorsner4571 Thankyou for your query. Al2 is Aluminium powder, the 2 is meant to be 1/2 a line down. As per the formula. I cannot do this with the line layout given here.

    • @davidwootton683
      @davidwootton683 ปีที่แล้ว +1

      @@tudorgheorghe4532 1 gram of Al2 powder to 1 kilogram of pure Portland Cement. Test batch first.

  • @janak732
    @janak732 2 ปีที่แล้ว +1

    Is this technical video or DJ party?

  • @segeredi8526
    @segeredi8526 2 ปีที่แล้ว

    Mantap bosku

  • @user-rb8ck6fu9k
    @user-rb8ck6fu9k ปีที่แล้ว +1

    ماهي اسماء المركبات والنسب

  • @m12345ft
    @m12345ft 2 ปีที่แล้ว +1

    What is the cost of the equipment? I’m in USA.

    • @cellularlightweightconcret1499
      @cellularlightweightconcret1499  2 ปีที่แล้ว

      It depends on what you are going to produce. The cheapest option is to buy our assistance with the recipe creation using your raw materials, our service charge is 250 USD, than you can start from manual production. The basic recipe you can find over here www.pioner-group.com/concrete

  • @mactec54
    @mactec54 3 ปีที่แล้ว +1

    Does it expand in the mould and does it bond to steel

  • @roberthedler6019
    @roberthedler6019 2 ปีที่แล้ว

    what is the insulation value

    • @cellularlightweightconcret1499
      @cellularlightweightconcret1499  2 ปีที่แล้ว

      Thermal conductivity for the material is 0.11 W / m*K . R Value and U Value depends on your wall thickness

  • @BiznessOnWheels
    @BiznessOnWheels 3 ปีที่แล้ว

    What is the liquid on the bottle?

    • @cellularlightweightconcret1499
      @cellularlightweightconcret1499  3 ปีที่แล้ว +1

      It was liquid soap to make reaction faster. Here you can find the basic recipe www.pioner-group.com/concrete

    • @raoahsenali8918
      @raoahsenali8918 ปีที่แล้ว

      Absolutely right answer

  • @khaderdiri9755
    @khaderdiri9755 2 ปีที่แล้ว

    What is the UV for this lightweight concrete?

    • @cellularlightweightconcret1499
      @cellularlightweightconcret1499  2 ปีที่แล้ว +1

      Thermal conductivity for 400 kg/m3 density is 0.1087 W/mK. R-Value and U-Value depends on your wall thickness

    • @khaderdiri9755
      @khaderdiri9755 2 ปีที่แล้ว

      @@cellularlightweightconcret1499
      89 mm thickness for the wall

    • @cellularlightweightconcret1499
      @cellularlightweightconcret1499  2 ปีที่แล้ว +1

      @@khaderdiri9755 for 89 mm profile not possible to achieve U-Value 0.3 w/m2K with non autoclaved lightweight aerated concrete without extra insulation with rock wool or Polystyrene.

    • @khaderdiri9755
      @khaderdiri9755 2 ปีที่แล้ว

      @@cellularlightweightconcret1499
      Cool. I need autoclaved aerated concrete with this specs.
      How can you send me quotation with such specs?

    • @cellularlightweightconcret1499
      @cellularlightweightconcret1499  2 ปีที่แล้ว

      @@khaderdiri9755 we are working with NON autoclaved lightweight aerated concrete only. This is our website www.pioner-group.com/technology there you can find some more information about our products

  • @icondec
    @icondec ปีที่แล้ว

    What PSi on this ?

  • @jhonpiconvelasque707
    @jhonpiconvelasque707 2 ปีที่แล้ว +1

    el aluminio es muy mal aislante térmico

  • @user-po5hr1zy9q
    @user-po5hr1zy9q 6 หลายเดือนก่อน

    I guess no one in the video can speak. What are you mixing together? The music is too strong.

  • @jongmedellin4890
    @jongmedellin4890 3 ปีที่แล้ว

    hi i am interested on this pls

  • @rezasanati-fn4mk
    @rezasanati-fn4mk ปีที่แล้ว

    چگونه بتوانیم از زبان سازنده حالی بشیم که چه موادی را قاطی میکند

  • @prototype9000
    @prototype9000 2 ปีที่แล้ว

    Pretty similar to a geopolymer

    • @cellularlightweightconcret1499
      @cellularlightweightconcret1499  2 ปีที่แล้ว

      Most probably. In the video non autoclaved lightweight aerated concrete. Mix of ordinary portland cement, limestone powder, aluminum powder and water. Densities from 500 up to 1200 k/m3 with some additives it can be 150 k/m3

    • @prototype9000
      @prototype9000 2 ปีที่แล้ว +1

      @@cellularlightweightconcret1499 i bet adding a little graphene would add allot more strength

    • @cellularlightweightconcret1499
      @cellularlightweightconcret1499  2 ปีที่แล้ว

      👍🏻

    • @PauloRoberto-fk6cd
      @PauloRoberto-fk6cd 2 ปีที่แล้ว

      @@cellularlightweightconcret1499 Please, could you inform where couldwefind the mix for 150K/m³ ?

  • @user-tj3zt5jw7l
    @user-tj3zt5jw7l 2 ปีที่แล้ว +1

    Армирования маловато, да и профиль не даст соединиться раствору.

    • @user-dv3yg8pt5e
      @user-dv3yg8pt5e 2 ปีที่แล้ว

      Там термо профиль, с просечкой

    • @user-dv3yg8pt5e
      @user-dv3yg8pt5e 2 ปีที่แล้ว

      Там армирование и не нужно, этотогрпждающая конструкция

    • @user-tj3zt5jw7l
      @user-tj3zt5jw7l 2 ปีที่แล้ว +1

      Где дырки???? На видео их нет

    • @user-tj3zt5jw7l
      @user-tj3zt5jw7l 2 ปีที่แล้ว +1

      Что за сказки, про бабку)))) а про щелочь слышали???? И как метал гниет от реакции???

    • @user-dv3yg8pt5e
      @user-dv3yg8pt5e 2 ปีที่แล้ว

      @@user-tj3zt5jw7l а через арматура не гниёт? И там он оцинкованный, гнить 200 лет будет

  • @user-dv3yg8pt5e
    @user-dv3yg8pt5e 2 ปีที่แล้ว

    ООО, пенобетон придумали... Скоро глинобит разработают)))

    • @cellularlightweightconcret1499
      @cellularlightweightconcret1499  2 ปีที่แล้ว

      Это не пенобетон

    • @user-dv3yg8pt5e
      @user-dv3yg8pt5e 2 ปีที่แล้ว

      @@cellularlightweightconcret1499 а что это? Газобетон? Цемент песок пудра

  • @FrameMac-LGS
    @FrameMac-LGS 10 หลายเดือนก่อน

    Manufacturer of intelligent manufacturing equipment for light steel structure buildings
    Foshan FrameMac Technology Co., Ltd. (FrameMac) is a professional light steel structure building intelligent manufacturing equipment manufacturer in China, providing a fully automatic light steel building frame production solution integrating software and hardware. The "FrameMac" solution realizes the seamless connection of "end-to-end" production from CAD architectural design software to production processing, construction and installation.

  • @user-su1ru7ij6h
    @user-su1ru7ij6h 2 ปีที่แล้ว

    Какое-то видео не очом

  • @Lawiah0
    @Lawiah0 2 ปีที่แล้ว

    Very half-@ss

  • @sopocianin
    @sopocianin 2 ปีที่แล้ว

    Co za glupota