#59 DIY electric board - It's my new beast pt.2 (test ride)
ฝัง
- เผยแพร่เมื่อ 16 มี.ค. 2019
- This video is about #59 DIY electric board - It's my new beast pt.2
E-mail - j3i3s3@gmail.com
INSTA - / kamijuins
MUSIC BY Yugi boi - Drip (ft.chromonicci)
1.Deck - bustinboards.com/products/spo...
2.Motor - diyelectricskateboard.com/col...
3.Truck - diyelectricskateboard.com/col...
4.Motor mount - diyelectricskateboard.com/col...
5.Truck clamp - diyelectricskateboard.com/col...
6.Motor pulley - diyelectricskateboard.com/col...
7.wheel - www.amazon.com/gp/product/B01...
8.wheel pulley - www.diyeboard.com/drive-wheel-...
9.Belt - diyelectricskateboard.com/col...
10.ESC - flipsky.net/collections/elect...
11.Remote - flipsky.net/collections/acces...
12.Switch - flipsky.net/collections/acces...
13.Battery - hobbyking.com/en_us/turnigy-h...
14.Connectors - flipsky.net/collections/acces...
급하게 영상을 만들었더니 내용이 부실하네요. 이 전동보드는 타면서 다른 보드들과 비교하고 계속 내용을 업데이트 할예정입니다. 재미있게 봐주세요 :-)
I made a video in a hurry, and the contents are poor.This electric board will compare with other boards as it ride. And I will continue to update. Please enjoy it :-)
KAMi JUINs yeah I use to have a motor from them but I ruined it in the rain/ a really deep puddle 😅 there really torquey motors that they sell with a 10mm pile rather than the weak 8mm you get on most
@Jazz I'll try it, you don't need to say please :-)
@@esk8experimentalist386 Thanks :-)
Jazz year your right, there not weak but a 10mm shaft tends to have a bit more torque to it and of course is a bit stronger
@Jazz Thanks :-) I will~
I have to say that I really appreciate you numbering all your videos and keeping them so organized. I didn't have to search for this second part, just look for 59 and it's there.
Well done
Thank you for watching :)
This has quickly become my favourite Esk8 TH-cam channel. The editing is great and the story details with Kami are really entertaining. Subbed with notifications and looking forward to your next video!
Thank you so much :)
기다리던 영상이 올라와서 즐겁게 봤습니다 ~ ㅎㅎㅎㅎ다음 영상들도 빨리 보고싶네요 ㅎㅎ
항상 기다려주시고 재미있게 봐주셔서 감사합니다 :-)
Really like your videos, keep up the good work :)
Thank you for watching and visit :-)
기다리던 영상이 올라왔네요. 잘 보겠습니다 😍😁
네 기다려 주셔서 감사합니다~ :-)
@@KAMiJUINs 물론 기다려야죠~ 👍
Very good to test it out and reconfigure things as needed. Also, KAMi is so cute!
Thank you for watching :-)
늘 함께하는 까미가 있어 더욱 재미있게 시청하고 있습니다. 다음 영상도 기다려집니다 ^^
까미가 좋아합니다~ :-)
Please always wear a good helmet and padding with that BEAST of a board! I'm sure it is your best board that you have. I love the low rise, but I think you will have some damage to esc/battery casing due to a bump or rock. Be careful!
Also, it is better to buy the best parts you have instead of *regretting* your DIY build after making it with cheaper parts.
I slipped badly on the way home on my Meepo because of the Friday rain, so your off-road wheels are something I'm going to look at later :)
Thanks! You and Kami are the perfect duo.
Thank you for watching and visit :-) your suggestions and opinions too. I will~
beautiful. killer build! your pup is cute and hillarious as well. =)
Thank you for watching and visit~ :-)
OMG kami you've created monster 😂, it even sounds like an angry monster when starting up and stopping
Thank you for watching :-) That's right. It's a little different from the boards I've picked before.
Wow! This is amazing! I like the build and the video! I have an abandoned electric board project I will retake right now!
Thank you for watching :) Happy new year 2020!
AWESOME BUILD!
Thank you for coming Bro :)
Great videos KAMi. 28k views. You must be famous now :-). Surprised Evolve company not hired you for their Research & Development team (note to #Evolve #Skateboards #management if you reading this #"hire this dude") this is an inspiring build and Im sure your fan base are growing by the minute. Keep up the good work KAMi. :-)
Thank you for watching :) and thinking that way.~
Beauty! Very well done. Thanks for sharing.
No problem :) And thank you for watching~
I love the rear mounted motors. Beautiful board.
Thank you for watching :)
Nice build🤘 looks powerful
Thank you for watching :)
Amazing looking board and great choice of deck. The only thing letting the whole build down is those huge enclosures, something more streamlined would be better
Thank you for watching :-) And suggestion too~
Nice build. Even though you made in a hurry still good content.
Thank you for thinking that way :-)
Thank you.
No problem :) and thank you for watching.
That's a sweet build! Only thing I would change is I'd put the batteries and speed controller on the top in the back to keep them from being hit by debris or maybe a metal skid plate underneath
Thank you for watching with your opinion :)
Dam that looks fast and I thought my Backfire was fast! Lol
Thanks for the English subtitles much appreciated
It's not a perfect subtitle, but thank you for watching :-)
Great work!
Big Thanks ;)
괴물을 만드셨군요. 영상으로만 봐도 토크가 느껴지네요 ㅎㅎ
감사합니다 :-)
Nice build fella 😎
Thanks~ :)
Great video, keep it up. Subscribed.
Thank you for watching and visit :-)
Nice electric skateboard and details videos u are done! Btw i saw u have a lot skateboads in ur room! You should make more and sell it worldwide by alibaba or amazon😎
Thank you for watching :) I don't have such a plan yet.
But I appreciate your opinion.
정말 기다렸던 영상이에요! 재밌게 보고있습니다~
시청 감사합니다~ :-)
Your dog parts are so funny! 😂
Yeah!!! Even in reality, he does a lot of funny things lol~ Thanks :)
Great video!
Thank you so much always :-) !
기대하고 있습니다
시청 감사합니다 :-)
Nice build!
Thank you for watching :)
looks good
and is pretty damn fast! super fast
Thank you for watching :)
오우 부실하긴여 오늘도 멋진보드 잘 보고갑니다아
감사합니다 흐헤님 :-)
Love it!
Could you take it off road? the wheels are semi-at :) I'm really concerned about the enclosure height, but good you can raise the board.
Expensive!
I got my Wowgo Mini, I think I'll start modding it soon. The weather is getting better! heh... calling for more snow this weekend. :(
Thank you for watching~
In fact, I wanted to make this board was a powerful DIY board. And could it be worth more than a brand board? These were the two reasons.
So I didn't think about the price.(It started with self-satisfaction.)
I hope you can do whatever you want. The weather as well. :-)
Great job men👍👍👍
Can you do (ALL TERRAIN BOARD ) for your nest video?
Thank you for watching :-) I don't have an all terrain board plan yet. But I'll think about it.
Very nice!
Thank you for watching :)
Can I fit a 27’’ case under this deck?
wow best DIY
Thank you for watching and visit :)
Cool man
What a great job you've done, that board looks rad as! Why those all terrain wheels though??? I would have gone for slicks since you seem to only go on tarmac. Less friction more action he he! Well done, look forward t o next vid x
Thank you for watching :)
would i be able to use the same esc and remote if i were to buy the direct drive motors by torque motors?
Of course, it is possible and some of my subscribers have built it so.
i think you should make a custom thin 18650 pack, it will be perfect
Thank you for your opinion. I'll think about it :-)
Yeah but the 18650 cells aren't made for high discharge , if you want to go only for torque & speed , lipo is the way to go 😃😃
@@nextechprojects3774 Thank you for watching :)
@@KAMiJUINs Love your videos
@@nextechprojects3774 If you have many batterys in parallel it will have a high discharge rate.
This is a sick build! I always encourage DIY! And you executed it amazingly!! Total finesse!! Its super clean! I looovvveee the wheel choice too! All I have to say is change the position of the rubber pieces for your trucks. I.E. board > rubber > trucks > hardware. Rather than board > trucks > rubber > hardware. Make sense? Helps with shock absorbancy and little more clearance to reduce damage to your undercarriage! But other than that its over all BITCHIN!
P.S. Edit - I spoke too soon about the rubber placement lol. But anyways! new subscriber here! I think youve earned it ;) also if you dont mind me asking, where are you from? Cause I noticed your subtitles are both English and Chinese(?) If I'm correct on the other language? Not trying to be rude, jusy genuinely curious!:) hope you get the recognition you deserve with this build!
-Liz from Tulsa, Oklahoma.
Thank you for watching :) with your opinion. And i'm from Korea.
Love your editing , to bad you couldn’t get it to sit low almost perfect
Thank you for watching~ :-)
Job welll done very impressive
Thank you for watching :)
Very nice brother
Thank you for watching :)
Sweet bro!
Thank you for watching :)
존경합니다.
Good video, very interested in building an e-longboard myself........?! Where did you get the hangers you use for storage/displaying your boards that we see right at the end of the video?
Thank you for watching :)
It cost about 10 dollars and it's all Ikea stuff. (Two Ikea Curtain Bar - IRJA, Ikea hooks - KUNGSFORS)
It is not clear whether other countries use the same name.
And if you want to know more about the hanger, you can check my video #21.
Cool build, I want to do a build very similar but using alien power systems 6384 motors
Thank you for watchig :-) I think, Alien power systems parts are all good. and I want to use one day~
I wonder if that deck would work with the Raptor 2.1 when you get it?
Thank you for watching :-) I'm curious, too And I don't know when Raptor's coming.
I’m a subscriber awesome videos, cool dog!!! I’m first time builder and just have two questions. I’m thinking to purchase the same Dual FSESC6.6 or the Unity. Has your VESC had any issues since you have been using it? Hopefully no shorts due to high voltage. I think the Focbox Unity has a TVS Diode to protect against high voltage. I’m not sure about the FSESC6.6. But if you haven’t had any problems with that vesc I may buy that one. Please let me know, thank you! Again great videos!!!
Thank you for watching :) So far, there has been no major problem (the reason I purchased FESSC6.6 is because I ordered RAPTOR2.1).
The only feeling I've used so far is that it's more than my ability to ride.
Get some bushings from Riptide. I am sure it will help on the stability. Like a Canon/Chubby would be a solid setup. Also, some Caliber 2 base plates.. 50F/45R, would make this a much more stable machine! Great build man, love your vids
Thank you for watching :-) And Which degree of hardness? (Canon/Chubby). please give me a recommend, if you know.
@@KAMiJUINs all depends on weight. But contact Brad@riptidesports hes the owner and his knowledge is incredible. He can guide you to the right duro and which bushings for those TB218s.
Trust me the whole DIY community hits him up on what's the best bushings for your weight and style of riding.
My setup is for dual 6374, on AbEC107s...12s4p geared at 40mph. Thus my canon/chubby for stability on a speed build. My Krank duro is 93 on rear.
@@givemeurmoney I got it . Thank you so much :-)
@@KAMiJUINs my pleasure! Cant wait to see the next video!
beautiful board
Thank you so~ much :)
The whole stuff is dope. Powerful well known branded motors, good looking deck with fine concave and famous fat boys. EVO is so weak next to your diy one. I love your board. I’ve been devoted to longboard tech development for years. Your work makes me so jealous. Keep it on!
I am ashamed of your compliment :) In fact, the board is too strong for me to control. I think this setting is suitable for setting up the Mountain e-Board.
Thank you for saying that once again :)
Can you do a 0-35kmh test. DIY vs evolve with same sized wheels. Or like 30-50 meter drag race. We know the DIY has more top speed but how fast is the acceleration really... if you put a battery enclosure like the evolve on the DIY it would look perfect 👌🏽
Thank you for your suggestions and opinions :-) I'll take a look ~
You could use BMS with those lipo for easy charging, also teardown and resolder the battery so you could have thinner battery pack
Thank you for your opinion. but I'm still hesitant because it's not easy for me :-) I'll try to it later~
KAMi JUINs you could watch Mike Beard's tutorial about making battery pack. I saw a lot of tutorial and found that video is the best tutorial for connecting battery with bms. You just need to replace the li-ion cells with your lipo cells. Btw, for easy mapping cells with bms, you could mark -1 to -10/12 for each bridged poles, also mark the negative and positive of each cells to prevent mistake. Finally, bypass discharging of the bms and setup minimum discharge cutoff in your vesc. Have fun 😎
@@tuhip2108 Thank you so much :-) and i know his channel already~ i'll check
보드가 정말 멋지고 강력하네요 전 모터만 180k로 하고 중국제 컨트롤러와 일반 저가 밧데리로 했더니 언덕은 그냥 올라가는데 속도가 30km/h정도만 나고 더이상 치고 나가지 못하더군요 컨트롤러와 밧데리가 역시 중요한 요소네요
그렇게 봐주셔서 감사합니다. 모터kv(회전수)랑 기어비, 바퀴크기도 속도와 연관이 많이 있습니다. 흥구님 셋팅에서 변경이 비교적 쉽게 가능한 기어비랑 바퀴사이즈 조정하면 토크는 조금 잃지만 속도는 늘릴수 있습니다. 참고하세요 :-)
wish i have the money to make something like that for my lad. very cool board
I hope you can one day :)
Hi Kami, can you do a updated version of bustin deck with 2023 bateries motors etc ? I know this deck is briliant, also my personal favourite, it would be nice to see this deck with with some 12s setup.
If I have a chance ~ :)
Wow man ! Pretty good clean job, i want make a similar project with a Torque direct drive kit, have you some recommandations for ESC work with ?
Thank you for watching :) It's my opinion that If you set up a battery of 10s(36v), you could enough to use the Flipsky 4.20 Plus ESC. But If it's a 12s battery setup, I recommend using same as mine. And the remote control was 2.4Ghz Remote VX1 better than this.
Stay safe~
@@KAMiJUINs Thanks a lot ! Have you already tried the direct drive ? I ride the Revel kit and i love it !
Cool board and video!! Can you tell what enclosures you used?
Thank you for watching :-)
It's just a thick plastic case. I put a PU film on the outside of the case. And inside, 3M sponge was treated.
You can see it in more detail in the previous video.
Nice build. How do you like the TeamGee H6. I saw the braking is quite hard?
Thank you for watching :-)
In fact, I didn't experience many E-boards at the time, so I wasn't very good at remote control manipulating teamgeeH6. Now i feel that, it's just a medium braking that's not good or bad.
A great board, you inspired me to build my own board. Did you measure the distance your board can ride?
Thank you for watching :)
It is expected to be about 12-15kilometers. (8-10mi) And my weigh is 64 kilograms. (140lb)
My electric board has replaced some parts and is now editing the video. Visit again~
I ve got almost the same. But with 12s4p, hypercarves trucks, gt2b remote.
Nice :) and thank you for watching ~
Why do the motors spin with the wheels I thought they were supposed to be stationary
Because it's the outrunner motor.
So did u use a 13mm wheel pulley with a 15mm belt ... did that work out ok
the motor pulley was 13T and 15mm wide. so it was no problem
no link for the hard to find plastic boxes?!!
Thank you for watching :)The plastic case did not have a link. I bought it offline. It is 22 by 15 by 4cm. (8.6X5.9X1.6in)
pretty scary torque and braking but also safe if you need to brake or accelerate fast.So overall nice build
Thank you bro :)
Did u ever fix the wobbles? I weigh 100kg and I will be using same parts but with 110mm tires. Would you recommend another deck?
Please watch my video #84,#85
Nice build, but that clearance from the enclosure to the ground is scary small. You better be riding on flat ground at all times!
Thank you for watching :) now i'm going to change some parts for the gap.
So how do you make the wheels fit in those trucks I have the same trucks and same wheels but they have a big gap and dont know why
Wasn't there a spacer or washer with which to tie the gap when you bought the truck? You should use them to adjust the spacing.
KAMi JUINs no 😭 it did not come with one, but I know what you’re talking about! And I ended up using the spacer that come with the bearings for the wheels and they worked like a charm! Thanks a lot! 👌🏽🔥🔥
@@ThatDudeCortez No problem ;)
How are you getting these camera angles, they look awesome!
Thank you for watching like that :)
how you charge the batteries ? through what ?
I still use the balance charger after taking the battery out of the enclosure. Although BMS was planned to be installed, it was difficult to find BMS that allows high discharge rates of Lipo batteries. I have found some, but it would be better to use a 12s lithium-ion battery pack with BMS because it was expensive.
Wind noise makes it more Legit
crasy
i really like your videos and your dog is amazing. great work and great builds. Am I right that you have to open the battery case every time you want to charge the two 6s Lipos? any plans to fix that problem? another question: your skateboard storage build on the wall - do you have a purchasing list for that? keep up the great and entertaining work. best regards :)
First, thank you for watching :)
1. So far, I open the enclosure whenever I charge.(still use balance charger.)
(Afterwards, I will decide whether to install the BMS or replace it with a 10s battery protection circuit installed.)
2. It only cost about 10 dollars and it's all Ikea stuff.
(Two Ikea Curtain Bar - IRJA, Ikea hooks - KUNGSFORS)
It is not clear whether other countries use the same name.
And please see my TH-cam video #21.
thank you so much for the quick answer :)
@@KAMiJUINs
Awesome. Have you made throttle curve adjustments?
Thank you for visit :-) yes i did. I think, I was too used to the controls of the previous boards.
Still, if there is any throttle adjustment you can recommend, I would like to get your help.
@@KAMiJUINs I personally like exponential -40. It makes the initial throttle input quite lazy and means that you need to use more throttle travel to get more power. I like to leave the brake curve linear. Also 0.2 - 0.3 ramping. Try different combinations. I like having a lot of power but lazy response.
@@chrisrathjan1501 I got it :-) Thank you soooooo~ much always !
How is the turning compared to a 180mm truck?
Thank you for watching :) It doesn't make a big difference, but I think, the speed wobble makes it easier.
You can break Sonic with that board :D
Thank you for watching :)
배터리 케이스랑 ESC 케이스를 3d프린터로 슬림하게 만들어드리고 싶군요 ㅋ 배터리 두께가 있어서 어쩔수 없으려나
This is crazy:)) I want one:P:D Can I ask how long is the range with this at mid power. Thanks for info, and great work again!!;):D
Thank you for watching :) I couldn't range test yet. But now I'm expecting around 15 to 20 kilometers. I'll let you know after the exact test.~
@@KAMiJUINs Thanks again :))
How did you record when you were riding? Was it a 360 camera?
Thank you for watching :) Yes it was. INSTA 360 ONE X
how do u check your battery percentage?
Thank you for watching :) I can check the low voltage status with the lamp color of the remote control. (The exact percentage is not known.)
And in my case, It was not important for me because I don't used to enjoy long distance ride.
For your information, my DIY board have batteries of 6.6AX2.
After the ride, I calculated the remaining amount of battery charge and concluded that I could ride a distance of 20 to 25 kilometers.(12.5 - 15.5 mi)
you are so cool =)
Thank you for watching :)
Cool i want to build something similar.. Is there a ESC for 4 motors?
Thank you for watching :-) The two ESCs can be connected together.
th-cam.com/video/sv7ZFHdA69c/w-d-xo.html
4 motors would be madness! Do it!
Yes you can hook up multiple VESC with a CAN Bus cable.
@@TylerHarney Madness I say, but fun!!!!
nice deck, its this deck flexi like a vanguard or any other deck you have?
Thank you for watching :-)
This deck is not flexible.(BUSTIN 35" sposter E core) So I used 3mm(1/8") pad between the truck and the deck for residual vibrations.
@@KAMiJUINs look like this deck good for AT setup
대단하시네요 ㄷㄷ
아~ 네ㅎ :-) 시청 감사합니다~
TIP: mount the board on TOP of the trucks, I know it'll look funny, but you'll get more ground clearance without having to change anything. edit: use the rubber shock pads in between the board and trucks to reduce board/road vibrations.
haaaaa I wrote this before I watched the rest hahaha
I was thinking the same thing.
@KAMi JUINs does mounting the trucks under the deck affect ride feel or performance in any way.
Is this your question? Or is that an opinion? I don't understand well.
Please tell me more about it.
@KAMi JUINs this was a question
@@davyguy87 It can lower the overall center of gravity, which increases the stability of the ride.
오 멋지네요 라이딩영상 많이좀 올려주세요 ^^
앗 준희님 ㅋ 영상찍다 떨어져 죽을뻔요 ㅎㅎ
@@KAMiJUINs 조심하세요 저도 낙차해서 3달째 치료중입니다 ㅠㅠ
@@sinjh111 어이쿠 언능 쾌차하셔요~
조금 늦게,, 전동보드에 관심이 생기면서 여기까지 오게됬습니다 ㅎㅎ 저도 지금 DIY 보드를 만들어보려고 하는데요, 혹시 지금처럼 만드신 보드는 절대 물에 노출되면 안되는 거겠죠,,??
배터리케이스와 ESC케이스에 실링처리하면 가볍게내리는 비 정도는 상관없습니다.
하지만 젖은 지면이 전동보드타기엔 가장 위험한 조건 중 하나입니다. 그래서 이보드의 경우 그런점을 배제하고 제작하였습니다.
what about the weight limit?
Actually, it's hard for me to know this part. Thank you for watching :)
Thats a really good Video Bruh.
Good work👌🏻👍.
But for 1300$ I can buy an better E.Board.
But the Video is Good
Thank you for watching :) If you think about the effort and time to make it, it may be a good way to pay a little more and buy a good brand e-board. But there are also people who like this. Let's think of it as a multiple choice. lol
Just curious what board has these specs? I would really like to know
I don't if I want to get an electric board or a dog now...
why are your motors rotating at 2:34?
Thank you for watching :) I can't understand what you mean.. It's a electric long-board !
Damn...this is expensiva! Hehe but this is damn!! Cool!!
What was the price for all parts
There is a scene where the price of parts is shown in the video. And each component link in the description box down below.
전동보드 입문하려고 까미님 영상 몇번씩 돌려보고 공부하고있습니다.. 이참에 저도 DIY를 해보고려고 하는데 몇가지 궁금한게있어서 염치없지만 질문좀 드려볼려고합니다.. 이 휠이 이볼브 GTX와 호환이 될까요? 그리고 배터리 인클로저와 볼트 너트 부속들 출처가 궁금합니다.. 제일 걱정되는건 VESC tool로 셋팅하는게 있는데 제가 영어를 잘 못해서 혹시나 잘못 될까봐그러는데 왜 모터설정값이 75가 나오는지 간단하게 설명좀 부탁드려도 될까요?? 마지막으로 충전은 어떻게 해야하는지도 좀 부탁드리겠습니다.. 감사합니다
1. 우선 GTX의 ABEC 휠풀리와 호환되지 않습니다.
2. 배터리 인클로져는 데크모양과 사용하실 배터리 크기에따라서 직접 맞는것을 찾으셔야할것 같습니다.
3. 볼트 너트 부속품은 네이버에 영원툴(나사,너트), 철물 코리아(꺽쇠), 삼디몰(인서트너트)에서 구매했습니다.
4. 셋팅의 경우 배터리에서 밀어줄수있는 전류크기와 ESC에서 출력할수 있는 전류크기 그리고 모터에서 출력할 수 있는 전류크기의 상관 관계에서 결정됩니다. 딱 정해진 것이 아니라 그범주안에서 자신에게 맞는 설정값을 찾아 입력하여야 합니다.
5. 충전을 쉽게 하시려면 Lipo배터리 사용경우 BMS라는 배터리 보호회로를 설치하셔야 하고 아니면 충전시마다 배터리를 꺼내서 밸런스충전기에 충전을 하여야 합니다. 모든게 힘드실경우 BMS가 장착되어있는 리튬이온셀 배터리 팩을 구매해서 사용하시는 것도 방법입니다.
@@KAMiJUINs 상세한 답변 감사드립니다.. 큰 도움이 되었어요! 앞으로도 좋은 영상 기대할게요!!