It had been setting for ten years an I flew to Iowa an drove it all the way back to Kentucky lmao 🤣 done amazing. My wife was amazed that I made it home alive lmao 🤣
I've always wanted to do something like that. Find an older vehicle out of state and drive it back! But any noise I hear while driving, my mechanic mind kicks in and activates my anxiety haha
Nice job on the motor. I have a 1984 K20 with the Dana 60 in the front and a 14 bolt free floating in the rear with double lockers it's halfway built but I need to do a lot of work to it
Thanks! I had a dana 60 awhile back that I wish I would have held on to. I am also running a ff 14bolt in the rear setup with Detroit. Hey! Sounds like you're half way done!
Hell yeah my man. Looks amazing. I bought a 90 model v2500 burb to do basically the same with. Just gonna take the kids to ball games an what not in it.
Any chance you would make a detailed video of all of the suspension and what vehicles all the parts are meant for? This thing is exactly how i want mine. Your flex is crazy!
@jakefitzpatrick8550 I've been trying to plan a little wheeling trip but it's too hot down here in Texas at the moment. Once the weather cools down, I definitely plan on getting it out to a few places
Recently bought a 1990 V1500 and want to lift between 2-4inches, the darn rear sagging like a soggy pamper! Do you recommend the ORD shackle flip? What brand/size are your barn door gas struts? Genius idea. Mine is also red...mad inspiration!
Honestly of I did mine over, I would just have replaced the factory leaf pack with an aftermarket lift leaf. I installed the 4" shackle flip and it didn't quite lift it 4". My rear leafs were also really worn out so I ended up doing leaf swaps anyway. Glad my burb can be some motivation! Send me a message on my Instagram page @fullsize_fab about the gas prop setup!
great looks burb. i just snagged a 90 4x4 as a new project. who did your carpet? also the wheels you said where 15" or 17"? im looking to put 37's on mine as well but not a lot of lift. i want mine lower even if i need to cut fenders..
Thank you! I did the carpet. It was a kit I ordered online. The wheels are 17x9. I am also trying to get this thing as low as possible on 37s. I'm shooting to be right around 4" of lift.
Was also wondering your gear ratio. I have the stock TBI 350, 700R4 and since adding 35 in tires, I've lost some power. Wonder if 4:10s would make a difference.
@iamrobbiero oh 4:10s would definitely help. If you plan on sticking with 35s I might even look into 4:56 gearing. After editing the video, I realized that I definitely left a lot of important details out.
@@iamrobbiero check out Spicer parts gear calculator. You can play around with speeds and ratios to find out what gear ratio would be the best for your application.
I do, I used to camp out of the back of my suburbans for years. Until I came across a good deal on my first roof top tent. Thats when I realized I liked using the tent a lot more.
You did a lot of useless mods and did not do things you need to do. The ls swap time and money could have been used for many other things I see missing on this vehicles particular purpose. Absolutely NOT putting you down, just pointing out what I see.
I don't think the mods were necessarily "useless". Are there some that are impractical, yes. But the plans for the vehicle have changed over the years and they will continue to change. The ls swap was the best option at the time and wasn't that expensive to do. The original engine and transmission were tired and I just so happen to have a 5.3 powertrain ready to go.
Don’t let this guy get you down. There’s always at least one in the comments section….The LS swap made your truck much more drivable and enjoyable compared to some old TBI 350 or 454.
Hey Shooter!!! So you must be like the Donald Trump of old Suburbans right? Thanks so much for sharing your expertise with this guy. We’re all just lucky to share youtube with you. You fuckin clown.
My 12 year old.found your channel.
I like the simple complexity of what you are doing
Best comment I've had so far! Thank you!
The speed locks are cool they can open a beer and they might just saw sticks that get into your rim😎
Never thought about the sticks lol. But they definitely would!
Nice truck! I’m looking forward to seeing what you do next. I’ve got a 91 Suburban. 6” lift ORD springs, 37s, and a LT engine swap.
Thank you!! We will see what I do next. Its constantly changing.
Love the suburban, keep the videos coming
Thank you! I appreciate the support
It had been setting for ten years an I flew to Iowa an drove it all the way back to Kentucky lmao 🤣 done amazing. My wife was amazed that I made it home alive lmao 🤣
I've always wanted to do something like that. Find an older vehicle out of state and drive it back! But any noise I hear while driving, my mechanic mind kicks in and activates my anxiety haha
I just picked up my 89 suburban Silverado 4x4. I cant wait for some decent weather up here in Montana so i can start getting it trail ready
Nice!! I've always wanted to take the rig up to montana and do some trail riding!
Can't wait to see it driving around!
Me too! Looking forward to get this thing all dialed in and even more enjoyable to drive
Love the sub. I might still the front bumper idea
If you need any better pictures. Check out my build thread superburb906 on CK5.com
Such a sick rig dude!
Thanks man!
Nice work, man. I have the same burb
Thanks man!
Nice job on the motor. I have a 1984 K20 with the Dana 60 in the front and a 14 bolt free floating in the rear with double lockers it's halfway built but I need to do a lot of work to it
Thanks! I had a dana 60 awhile back that I wish I would have held on to. I am also running a ff 14bolt in the rear setup with Detroit. Hey! Sounds like you're half way done!
Sitting here going "this looks familiar" then the detailing pictures and front bumper " oh ya, I remember this from CK5"
Thats awesome! I haven't updated my ck5 thread in awhile its long over due!
@@Full-sizeFabrication I just bought a 89 suburban "trail boss" conversion tonight
Great vid. I'm getting a 91 in a month or so. Great inspo for a future build
Thank you very much! And I'm glad I could be some inspiration! Any questions just ask
Hell yeah my man. Looks amazing. I bought a 90 model v2500 burb to do basically the same with. Just gonna take the kids to ball games an what not in it.
Thank you! I remember riding in a red squarebody suburban as a kid. That's where it all started!
@@Full-sizeFabrication same for me my man. It was just blue inside an out lol.
Oh man! That blue interior though! One of my favorite for sure!
I wish my paint looked as good as yours lol mines not to bad but yours is really clean for sure
Honestly I was super suprised how It turned out. It still has its blemishes but for what it is, I'm happy with it!
nice 👍
Thank you!
Mines never had the ash trays used. It’s got 173k miles on it. All original
My last two suburbans were the same way. Didn't get so lucky on this one.
Any chance you would make a detailed video of all of the suspension and what vehicles all the parts are meant for? This thing is exactly how i want mine. Your flex is crazy!
I have actually been trying to make another video of the red burb. I think a suspension video would be good
@@Full-sizeFabrication agreed! We need to see this thing work too!
@jakefitzpatrick8550 I've been trying to plan a little wheeling trip but it's too hot down here in Texas at the moment. Once the weather cools down, I definitely plan on getting it out to a few places
parents had a 1988 in blue..we drove the crap out of that truck..Kind of looking for one now..
I got hooked on them as a little kid. They are getting harder to find. This one found me lol. I wasn't even looking at the time.
👍
Thank you for the support
Mine is also a Silverado and the windows only work when they want to lmao 🤣
And to think, people paid extra for that feature. I really do appreciate some hand crank windows every now and then!
@@Full-sizeFabrication hand crank windows are the best.
Recently bought a 1990 V1500 and want to lift between 2-4inches, the darn rear sagging like a soggy pamper! Do you recommend the ORD shackle flip? What brand/size are your barn door gas struts? Genius idea. Mine is also red...mad inspiration!
Honestly of I did mine over, I would just have replaced the factory leaf pack with an aftermarket lift leaf. I installed the 4" shackle flip and it didn't quite lift it 4". My rear leafs were also really worn out so I ended up doing leaf swaps anyway. Glad my burb can be some motivation! Send me a message on my Instagram page @fullsize_fab about the gas prop setup!
great looks burb. i just snagged a 90 4x4 as a new project. who did your carpet? also the wheels you said where 15" or 17"? im looking to put 37's on mine as well but not a lot of lift. i want mine lower even if i need to cut fenders..
Thank you! I did the carpet. It was a kit I ordered online. The wheels are 17x9. I am also trying to get this thing as low as possible on 37s. I'm shooting to be right around 4" of lift.
@@Full-sizeFabrication same! what was the carpet kit name if you dont mind me asking
Sorry, I just saw the comment. Let me do some digging and try to find the brand
@rlfdavin my carpet is from factoryinteriors.com
My anti theft is just tap into your fuel pump with a toggle switch somewhere easy
Pretty much the same concept
Interested in purchasing ashtray insert
Shoot me an email fullsizefabrication@gmail.com I will get you taken care of.
Stock 3.42 gears ? Wiked rig ,I have a 91 with 6.0 LS
Thanks! Sometimes I wish I went with a 6.0, I'm running 4:88s
Was also wondering your gear ratio. I have the stock TBI 350, 700R4 and since adding 35 in tires, I've lost some power. Wonder if 4:10s would make a difference.
@iamrobbiero oh 4:10s would definitely help. If you plan on sticking with 35s I might even look into 4:56 gearing. After editing the video, I realized that I definitely left a lot of important details out.
It's science trying to figure out what gear ratio works best. Thanks for the information. You can always do a Part 2 😉
@@iamrobbiero check out Spicer parts gear calculator. You can play around with speeds and ratios to find out what gear ratio would be the best for your application.
I so need that phone lmao i
I have yet to find another one. It's definitely unique
He doesn't have any money though!! Lol😅
You know, people choose suburbans because they can camp inside the vehicle. That way they don't need a roof tent set up..
I do, I used to camp out of the back of my suburbans for years. Until I came across a good deal on my first roof top tent. Thats when I realized I liked using the tent a lot more.
That somewhat role cage is. Just tarded
@frathousebikes4168
Well it's a harness bar. Only a tard would call it a role cage.
You did a lot of useless mods and did not do things you need to do. The ls swap time and money could have been used for many other things I see missing on this vehicles particular purpose. Absolutely NOT putting you down, just pointing out what I see.
I don't think the mods were necessarily "useless". Are there some that are impractical, yes. But the plans for the vehicle have changed over the years and they will continue to change. The ls swap was the best option at the time and wasn't that expensive to do. The original engine and transmission were tired and I just so happen to have a 5.3 powertrain ready to go.
Don’t let this guy get you down. There’s always at least one in the comments section….The LS swap made your truck much more drivable and enjoyable compared to some old TBI 350 or 454.
Hey Shooter!!! So you must be like the Donald Trump of old Suburbans right? Thanks so much for sharing your expertise with this guy. We’re all just lucky to share youtube with you. You fuckin clown.
You’re almost as useless and douchy as shooter mcgavin 😂