Peugeot 206 (citroen)c1380 fault code abs light possible fix

[@pablopereira7690]

yo he separado el modulo del motor y he limpiado los contactos que lo alimentan y funciona un tiempo pero hay que cambiar el abs al final.

[@salebasket]

Do you had to bleed the air on the brake calipers also?

[@mdf_channel03]

I have the same problem on my Peugeot 206 2005, the same code C1380 !

[@leandrozuccala3019]

Hello, what exactly did you do? Did you change the abs pump or did you clean the brake fluid system?

[@mechanichints6399]

i change the abs pump only and put new fluid you can test the pump if you feed it with - and +

[@tiagofilheiro9923]

Hi! My 207sw has the same problem. But the ABS light turn on only in bad roads, if the car shake a lot while I drive it. In good roads the system work ok.
Do I gonna have change the pump too?

[@mechanichints6399]

@@tiagofilheiro9923 do you have this code c1380 if you did you can test the pump if it is work then the problem is wiring if not the the pump

[@lukavukusic1642]

can pump be repaired when it is blocked?

[@10.000RPM]

Hi, is it possible to solve this problem by combining only the ECU and not the whole ABS pump?

[@mechanichints6399]

No this one was the abs pump

[@10.000RPM]

@@mechanichints6399 Hi, thanks for the video.
I disassembled the electronics and cleaned the 2 contacts.
Now the ABS light only comes on for a fraction of a second when I start the car.
However, while driving, the warning light remains off and the ABS works normally.
Using the diagnosis, the C1380 error still remains and I can't clear it. What could still be the problem or the solution? Thank you

[@mechanichints6399]

@@10.000RPM it should be cleared if there is no problem try clear when car running

[@mecaelobeydi2977]

Vraiment 😂😂😂