Fanuc Robodrill: Inputting programs from USB to CNC memory.
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- This is a short demonstration on how to input programs into a Robodrill via a USB stick. There are two methods shown here, one through copy/paste through the program button. The second way is through the graphical mode. The graphical mode works best for me. To put files back into the USB memory I usually use the program mode. If it chokes on the file transfer, check the program number (O####), if you have too many numbers in your program name, it will choke. Sometimes your USB stick isn't compatible with the mill - try a different one or format the one you've got. If you know the complete naming rules, post them below.
Thx for video . Fanuc file name is Oxxxx ie letter O followed by up to 4 digits.
Nice
can you help me to solve the problem like a G13 . I can't run g13 . the same robodrill but one I can run g13 but other one I can't run g13 . do you know what wrong? maybe that has some control?
Video not clearly