Why there is no sound and arching when you short the output? There should be a huge corona at the output short circuit site. Have you measured the output voltage ? Is it exactly 10KV? Please do that in front of the camera.
Sorry about that.... There are very loud Noise at home so i can't turn on the mic and the voltage is not 10KV sorry again for that...... ( Video Title Edited) to 1KV Thanks for your comment ❤️❤️
@@Electronic_For_You the frequency is changed by what size the wire is and how strong the magnet is and alot more stuff in terms of yours its going to be high frequency for the small wires and semi-strong magnet
@@Electronic_For_You bro no one measures it We all take a estimate by the breakdown voltage of air that is around 2kv per mm If your arc is established(formed) at 2mm then the voltage should be around 4kv. Breakdown voltage of air also depends on humidity and temperature but the average is around 2 - 4kv per millimetre. And I said the distance when the arc is formed ,it does not include how much you can stretch the arc. By the way your videos are fun to watch and you also do some efforts in making them , keep it up bro 👍.
All this will do is waste your time. It will short out because of poor insulation. Why not take some time, be safe, insulate your coiled "ware," utilize spellchecker, & have pride in what you're doing. A circuit diagram should be included, better description of the wire wrappings & the direction.
Sorry about that It was my starting video And back then i don't have that much ideas ...... And now I'm trying to improve my videos Thanks for your valuable feedback 😊
My apologies. If this was your beginning vid, you did excellent. Keep up the work. Thank you for taking the time out to make the instructional vids you do.
![แฉกลโกงงานวัด 2024 [ โกงมั้ยครับ ep.106 ] | DOM](http://i.ytimg.com/vi/taC5dpP3HXA/mqdefault.jpg)
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค2]](http://i.ytimg.com/vi/pZbsSDRrmXA/mqdefault.jpg)
I Don't know why but some people Disliked This video 😊 If You Have any problem with this video you can ask 👇👇 Me in comment i will try to solve it
New knowledge from this vid thanks it would be very useful for me.
I'm very happy that you found my video useful ❤️
you can check more inverter videos ....!
Congratulations on the video, very nice! Keep striving and always learning!
Thank you for Support ❤❤
Great video
Can i use small transformer???
From Phone charger
You need to find secondary coil...
nooooooooo
Yeas but phone charger transformer can't take input upto 6V ☺️
brother can you plz plz tell me how can I remove insulation of wire plz I tried with all steps but they didn't work
Burn with lighter
bro I tried but not worked
Do u use it for your home use or just it was a time pass project only..
It is just For My Viewers ❤️👌
Good
Can u make transformer without core ?
Yeas
But it called warless transfer 😇
I have a video check it
@@Electronic_For_You can u please send me the link
Ok
❤️
th-cam.com/video/hfx_sCMaP2Q/w-d-xo.html
What does it do taking out the air gap in the ferrite core?
It doesn't Oscillate well
What is the Mm of the secondery copper wire
0.2-0.5mm
Great video
Really I like this video
Thank you 🥰
Why there is no sound and arching when you short the output? There should be a huge corona at the output short circuit site. Have you measured the output voltage ? Is it exactly 10KV? Please do that in front of the camera.
Sorry about that....
There are very loud Noise at home so i can't turn on the mic and the voltage is not 10KV sorry again for that...... ( Video Title Edited) to 1KV
Thanks for your comment ❤️❤️
its probably very high frequency so that you cant hear it and if the arcs look feathered that means its even higher in frequency than normal
Yeas
Because the circuit set its frequency by his own
@@Electronic_For_You the frequency is changed by what size the wire is and how strong the magnet is and alot more stuff in terms of yours its going to be high frequency for the small wires and semi-strong magnet
Yeas
How to make fly back driver and how does it work 6:15
Ok
I will do
@@Electronic_For_You OK, nice video
🥰
what components do you use?
Check my other videos...!
@@Electronic_For_You Already
@@Electronic_For_You Can I use IRFZAAN Transistor and 100 Ohm . Resistor??
Yeas
but the input current will be vary high its better to use A NPN BJT not Mosfet
@@Electronic_For_You can use transistor 41, if the resistor usually uses 100 Ohm
220V??
1kv
10,00 Volt
can i make stun gun ring for pranking? with this circut
Yeas put diode on output and a 2kv cap
Cool info, thanks for sharing :)
♥️
10kv DC or AC
I think its AC
Its 10kv AC......
I Don't have 2 CFL lamp Only 1 i have 😢
You can use other transformer core
They disliked because the voltage is around 1 to 1.5 kv not 10KV
Sorry About that 😔
I can't measure high voltage
Multimeter limit 1KV
@@Electronic_For_You bro no one measures it
We all take a estimate by the breakdown voltage of air that is around 2kv per mm
If your arc is established(formed) at 2mm then the voltage should be around 4kv.
Breakdown voltage of air also depends on humidity and temperature but the average is around 2 - 4kv per millimetre.
And I said the distance when the arc is formed ,it does not include how much you can stretch the arc.
By the way your videos are fun to watch and you also do some efforts in making them , keep it up bro 👍.
Thank You so much bro
Your feedback will help me to improve my videos ❤️❤️❤️
Good idea
Thanks friend 😊
"no rewinding"
Lol
Yeah
😅
Show me output voltage
Its not 10kv
1kv
All this will do is waste your time. It will short out because of poor insulation. Why not take some time, be safe, insulate your coiled "ware," utilize spellchecker, & have pride in what you're doing. A circuit diagram should be included, better description of the wire wrappings & the direction.
Sorry about that
It was my starting video
And back then i don't have that much ideas ...... And now I'm trying to improve my videos Thanks for your valuable feedback 😊
My apologies. If this was your beginning vid, you did excellent. Keep up the work. Thank you for taking the time out to make the instructional vids you do.
thank you so much bro 😊
Have a nice day ✌️
It’s spelled wire
Sorry 😔
@@Electronic_For_You it’s ok, just saying
❤️❤️❤️❤️
By the way, great video
Thanks 😃
Bro u can get this type of arcs just by using a picofarad capacitor wtf are u wasting ur and others time
Watch my latest video
..... That will be enough for you bro "ZVS Arc" and BTW this is my very old video