Thanks for the very helpful guide, I also just bought a B. Rev drive off of Newegg myself; I had to crossflash to Stock Firmware first before I could flash it with the MaxBurner firmware, but other than that and a lot of restarts since I'm connected by SATA, went off without a hitch~ ^_^
@ carolina gamer thank you did it and it worked smoothly your vids rock am a noob and i flashed my liteon drive in my xbox 360 had to get key through mk101 used the probe 3 the x360usb and ck3 lite and worked like a charm and here i am flashing the liteon ihas 124b i think am a try crossflashing it to an ihas524 b i am a professional now just kidding lol still a noob but the videos and the tuts from tk make it so easy for anyone to do you guys rock .
i was lucky enough to find out that people in the comment section on amazon confirmed that it is the B version that i bought :P Im going for the ihas124b tho because its the cheapest
@4forksache Thanks for the response. I'm going to follow through with it tonight, for the umpteenth time. I've got iExtreme ready to launch. drive is connected via sata. I'm still looking at changing to IDE. I'll read up on it too. Thanks again.
@BoyzNAcne you only need those tools if you hv an old pc without sata. Swapping out your old one for the new one is all you need to do. Flashin takes about 10-20 secs and is done with the app provided.
@BoyzNAcne No its a dvd rewriter that you use to burn media like music, films ect. You may already have one in your pc so take it out and swap it with this new one. Flash it and you can now burn the new games that come out without getting errors you would get from using your old dvd rewriter.
@BookReader801 Yes mate just swap it out for your old burner or plug it into a sata port and when you boot the pc windows should recognise it like a usual burner. Then just flash it with with the tools and firmware provided in the burnermax files from c4eva.
I have the same iHAS424-98 B like you. I would like Label Tag. Can you provide some general instructions to cross flash it to also have Label Tag? Thanks for a great and easy to follow tutorial.
@JohnnyGreen75 Yes and since you will use this drive for XGD3 backups you will have also to update the topolody sectors, it is all very simple, just use abgx to control the iso file and it will doo all the work :)
@xMarshyy You can use either one but the mkm003 which is 8x on package will be able to burn at 4x per c4eva and the mkm001 we will continue to burn at 2.4x
@BookReader801 If it's on board sata then most likely not going to work, plus sata drivers are sometimes a hassle, if you have a sata card that's VIA6421A then you can do it for sure, but the X360USB Pro is recommended.
@MrRapper379 xconsoles are supposed to be getting some external case for them I think, but do not hold me to it, if they do not just get and external sata enclosure for a 5.25 drive.
@kickboxin55 You need to repatch the iso and reburn the backup with new topology data from axbg360. Get the new axbg, run original iso through, reburn. It should now work with LT+ 3.0
@lukeyd2k9 Yes you need it, because it allows you to burn the full image to the disc, 8.13 gigs are free. And MW3 is not out until next week I only help with legit back ups.
Great vid, flashed my drive with no problems. One question, now that it's flashed, does the burning process change? Or can I burn my backups the same way I did with Gears of war and Arkham city?
@SugerNoor1996 You will keep getting disc errors using a normal drive but some games may still play ok. Its hit or miss on wether they will work. If you go online then this is a must as you would get banned quite quickly.
Hey man, I need your help. I've been running into brick walls ever since I ordered this drive. I was following your tutorial and after I updated the drive, it asked me to restart; after I booted the computer back up, it doesn't recognize the drive! It says removable disk. I tried to instal firmware and everything. I think I'm cursed when it comes to this stuff. No matter what, something always goes wrong.
No, if you have room plug it in your PC sata, as you would a normal sata drive, and flash the same way as these instructions say. None of that other stuff is needed, just drivers, sata slot/cable/power from PC.
cant we use ck3 lite for powering this drive? I have molex power adapter, but i dont have the other cable which you are showing to have connection between molex and drive to power, what is that cable called?
i have IHAS 324B DRIVE I DID THE SAME THINGS TAHT YOU DID BUT WHEN I TRIED TO BURN THE GAMES, APPEAR ERROR OR WHEN I TRIED TO PLAY THE GAMES DONT SHOW THE GAME...
Hey I just ordered my iHAS burner from xconsoles. In order to flash it would it be possible to use the SATA chip that I used to connect my 360 Drive to PC to connect the burner?
Help Please! I have a ihas 424b & sabrent 5.25 enclosure case (sata) that I bought from newegg. Is this ihas 424b compatible with a dvd enclosure case? I ask because the fan on the enclosure case works but, my ihas drive will not light up or eject when connected. I have a laptop, not a desktop if that matters. thank you
@manokdog You need to do this so you brun the entie disc without errors. This means you will not get flagged, anyone playing with a disc that has errors will get flagged and banned
someone's already asked, but do is the x360 usb pro necessary? I already have an old case with a usb and sata connection which works with dvd roms or hard drives. Hoping I don't have to purchase the usb pro too
I've done all this. Updated by 324b to latest fw then went to write with matching flash and after 2 dashes pops up with a write error... I've tried this with 2 computers now
@CarolinaGamer can u pls let me know where u bought it frm????there r so many out there & i dont know if i wud be buying a "B" model....pls pls pls provide a link to the website where u bought it frm
Question: I have ordered the iHas 124 EXTERNAL drive. Will this work with this? And will it work just using the usbpro v2? Please tell me what I need to do before I get something I really dont need?
Hi ! i have one question about buying drive on amazon. i found liton drive and it says IHAS424-98 so there is no version written. can you help me with that problem? thanks. sorry for my bad english.
@BoyzNAcne Simply put most of the time it will not work, on board SATA is rarely compatible with 360 drives, and in the rare chance it does work you have a risk of bricking the drive.
@CarolinaGamer got the same problem as "jesusvalo"; try to flashed my 124 but it still shows 7.xx gb of free space. i tried to restore with eeprom and flash back to stock firmware - reboot - and then following your tutorial again. but its still not working for me. u got ideas of possible mistakes?
hi mate, only heard about this FW and ihas drives this morning , i checked my drive and it is an ihas324-b ( yay ) BUT ive been burning xdg3 games ( mw3 , BF3 , forza, GOW 3 ) fine with imgburn , what does it do and do i really need it? ( liteon 8xxx LT 2.0 ) cheers
do you need the x360 because i want to know if i can just plug it inot my windows pc which already has sata in it could i just plug the sata in and then it would op up on my computer or do i need the other adapters
HELP!!! okay so i flashed my drive IHAS 124B and in my computer when i put a verbatim it still says 7.96 and not 8.13. Also when i go in to imgburn to burn a game it says that one truncate message at the beginning. please help
@MM34ify so you don't need that extra tool he has in the video? onboard sata will work ? it seems to me they just want to sell their extra shit if you want a modded console...wtf
can we burn xgd2 also with same settings or this is only for xgd3 ??? plzzz reply me because i want to buy an liteon drive and i want to know everything before purchasing it ....
Just remove your old burner and put the ihas in its place then flash with the flash utilty program that came with C4EVAs firmware and your done. Simple and no need for usbpro (unless your using a laptop)
@4forksache my iHas324b has yet to flash. just upgraded to win7 64bit. any pointers? i also read something about running it back on win xp. stuck as all hell
as soon I start burning a xgd3 game I get a error and thelieon stops orkin I ought 2 and they oth do it with the xgd2 it works great or if you down load xgd3 games it works fine just not for making back ups of xgd3 games so I went out and bout a benq drive flashed it with the o800 firmware and it works great
@MM34ify Well I burned a backup of MW3 lately and I got 95% disc quality with nero discspeed test is that safe for live? i ran my mw3 iso through the latest abgx also
ok i have ihas 324b and i use latest imgburn and all isos i use are patched. I sm burning my discs at 2.4x with opc off and burn proof off and calculate optimal. at 50% verification, the burn fails after i receive an I/O error. How do I correct this??? Someone pleaseeee tell me! I also have burner max
Thanks for the very helpful guide, I also just bought a B. Rev drive off of Newegg myself; I had to crossflash to Stock Firmware first before I could flash it with the MaxBurner firmware, but other than that and a lot of restarts since I'm connected by SATA, went off without a hitch~ ^_^
@ carolina gamer thank you did it and it worked smoothly your vids rock am a noob and i flashed my liteon drive in my xbox 360 had to get key through mk101 used the probe 3 the x360usb and ck3 lite and worked like a charm and here i am flashing the liteon ihas 124b i think am a try crossflashing it to an ihas524 b i am a professional now just kidding lol still a noob but the videos and the tuts from tk make it so easy for anyone to do you guys rock .
i was lucky enough to find out that people in the comment section on amazon confirmed that it is the B version that i bought :P Im going for the ihas124b tho because its the cheapest
@4forksache Thanks for the response. I'm going to follow through with it tonight, for the umpteenth time. I've got iExtreme ready to launch. drive is connected via sata. I'm still looking at changing to IDE. I'll read up on it too. Thanks again.
I'm so glad the drive I bought a few months ago is an iHAS. Oh happy day.
@BoyzNAcne
you only need those tools if you hv an old pc without sata. Swapping out your old one for the new one is all you need to do. Flashin takes about 10-20 secs and is done with the app provided.
Ordered one on 10/14/2012 from newegg. Arrived today and is version B. Manufactured July/2012.
@BoyzNAcne
No its a dvd rewriter that you use to burn media like music, films ect. You may already have one in your pc so take it out and swap it with this new one. Flash it and you can now burn the new games that come out without getting errors you would get from using your old dvd rewriter.
@BookReader801
Yes mate just swap it out for your old burner or plug it into a sata port and when you boot the pc windows should recognise it like a usual burner. Then just flash it with with the tools and firmware provided in the burnermax files from c4eva.
I have the same iHAS424-98 B like you.
I would like Label Tag.
Can you provide some general instructions to cross flash it to also have Label Tag?
Thanks for a great and easy to follow tutorial.
@BoyzNAcne On board SATA will work fine, and I personally recommend it for the DVD burning, just not for flashing a DVD drive.
@jcoutee1980 It depends on the type of Verbatim discs you use. Though 4.0 tends to work best.
@JohnnyGreen75
Yes and since you will use this drive for XGD3 backups you will have also to update the topolody sectors, it is all very simple, just use abgx to control the iso file and it will doo all the work :)
@MasterKing777 this is not to play games on your xbox it is to burn your back ups, but yes that is all there is to it.
@xMarshyy You can use either one but the mkm003 which is 8x on package will be able to burn at 4x per c4eva and the mkm001 we will continue to burn at 2.4x
@BookReader801 If it's on board sata then most likely not going to work, plus sata drivers are sometimes a hassle, if you have a sata card that's VIA6421A then you can do it for sure, but the X360USB Pro is recommended.
@MrRapper379 xconsoles are supposed to be getting some external case for them I think, but do not hold me to it, if they do not just get and external sata enclosure for a 5.25 drive.
@kickboxin55 You need to repatch the iso and reburn the backup with new topology data from axbg360. Get the new axbg, run original iso through, reburn.
It should now work with LT+ 3.0
@prash8910 It's a SATA Device Power Cable Adapter, Molex to Sata adapter.
@lukeyd2k9 Yes you need it, because it allows you to burn the full image to the disc, 8.13 gigs are free. And MW3 is not out until next week I only help with legit back ups.
Great vid, flashed my drive with no problems. One question, now that it's flashed, does the burning process change? Or can I burn my backups the same way I did with Gears of war and Arkham city?
@SugerNoor1996
You will keep getting disc errors using a normal drive but some games may still play ok. Its hit or miss on wether they will work. If you go online then this is a must as you would get banned quite quickly.
@ujackoff2 no i meant for the flashing of the liteon burner. i already have my xbox flashed.
What equipment is needed for flashing the liteon burner?
@CarolinaGamer
Wait so this (specific) LiteOn iHAS model is a 360 drive?
Hey man, I need your help. I've been running into brick walls ever since I ordered this drive. I was following your tutorial and after I updated the drive, it asked me to restart; after I booted the computer back up, it doesn't recognize the drive! It says removable disk. I tried to instal firmware and everything. I think I'm cursed when it comes to this stuff. No matter what, something always goes wrong.
@slimps2 yes as long as you have the SATA ports available.
Thanks for your help, this works a treat.
@GoT2FeaRMe you should be able to. i just ordered one from newegg for 22 shipped
great tutorial man, really appreciate the help.
@ElColly
Yes still functions as a normal burner.
No, if you have room plug it in your PC sata, as you would a normal sata drive, and flash the same way as these instructions say. None of that other stuff is needed, just drivers, sata slot/cable/power from PC.
@BlakeEdwards7 No you can use SATA in a desktop.
Thanks, Dave, any advice on where to pick up the x360 usb pro?
@TheDude1501 Yes unless you have an iHAS already.
cant we use ck3 lite for powering this drive? I have molex power adapter, but i dont have the other cable which you are showing to have connection between molex and drive to power, what is that cable called?
i have IHAS 324B DRIVE I DID THE SAME THINGS TAHT YOU DID BUT WHEN I TRIED TO BURN THE GAMES, APPEAR ERROR OR WHEN I TRIED TO PLAY THE GAMES DONT SHOW THE GAME...
Hey I just ordered my iHAS burner from xconsoles. In order to flash it would it be possible to use the SATA chip that I used to connect my 360 Drive to PC to connect the burner?
Help Please! I have a ihas 424b & sabrent 5.25 enclosure case (sata) that I bought from newegg. Is this ihas 424b compatible with a dvd enclosure case? I ask because the fan on the enclosure case works but, my ihas drive will not light up or eject when connected. I have a laptop, not a desktop if that matters. thank you
@manokdog You need to do this so you brun the entie disc without errors. This means you will not get flagged, anyone playing with a disc that has errors will get flagged and banned
Which video do I watch to find out how to get the dummy.bin file?
@Jefftheostrich Your right I thought this was a video for flashing a 360 drive, my bad.
so all that extra stuff is for a laptop??? so since im on a desktop all i need is the drive and sata cable right??
someone's already asked, but do is the x360 usb pro necessary? I already have an old case with a usb and sata connection which works with dvd roms or hard drives. Hoping I don't have to purchase the usb pro too
@CarolinaGamer What exactly will happen if you try to flashing it with onboard sata?
I've done all this. Updated by 324b to latest fw then went to write with matching flash and after 2 dashes pops up with a write error...
I've tried this with 2 computers now
@CarolinaGamer can u pls let me know where u bought it frm????there r so many out there & i dont know if i wud be buying a "B" model....pls pls pls provide a link to the website where u bought it frm
Can I use Lite-On DRW-iHAS322 DVD-RW (SATA) this one instead of the one you have in video???
Question: I have ordered the iHas 124 EXTERNAL drive. Will this work with this? And will it work just using the usbpro v2? Please tell me what I need to do before I get something I really dont need?
Hi ! i have one question about buying drive on amazon. i found liton drive and it says IHAS424-98 so there is no version written. can you help me with that problem? thanks. sorry for my bad english.
When u order this on line how did u know that u were getting the B model ???
@BoyzNAcne Simply put most of the time it will not work, on board SATA is rarely compatible with 360 drives, and in the rare chance it does work you have a risk of bricking the drive.
I don't have to have a VIA card to flash this drive, right?? I can just use any on board sata to do this, correct?
@buckshotdeath alright dude...lets have it...where can we get them drives for cheap??
@MegaSuzukiboy
yes u need to flash it with firmware from the download pk
extremely nice video, thank you
@xMarshyy Verbatim is all I use and is the recommended brand.
if your drive doesn't show up, then try updating, worked for me
@CarolinaGamer got the same problem as "jesusvalo"; try to flashed my 124 but it still shows 7.xx gb of free space. i tried to restore with eeprom and flash back to stock firmware - reboot - and then following your tutorial again. but its still not working for me. u got ideas of possible mistakes?
Wich kind of external housing do I need to use this externally?
hi mate, only heard about this FW and ihas drives this morning , i checked my drive and it is an ihas324-b ( yay ) BUT ive been burning xdg3 games ( mw3 , BF3 , forza, GOW 3 ) fine with imgburn , what does it do and do i really need it? ( liteon 8xxx LT 2.0 )
cheers
do you need the x360 usb pro? i paid someone to flash my console so i have no equipment at all. THANK YOU
do you need the x360 because i want to know if i can just plug it inot my windows pc which already has sata in it could i just plug the sata in and then it would op up on my computer or do i need the other adapters
@halo32012 Follow the same steps but when I flash C4's firmware just flash your backup file.
HELP!!! okay so i flashed my drive IHAS 124B and in my computer when i put a verbatim it still says 7.96 and not 8.13. Also when i go in to imgburn to burn a game it says that one truncate message at the beginning. please help
can you do a video on how to flash back to stock or a link i can follow on how to correctly do this thanks
Nice tut as always
just lite on burners? can we use samsung burners? or is this just lite on has ihas?
@NgSxDropShotz hey do you need to do this to be safe online or just to make sure your game dont have error?
great vid keep them coming !!!
@MM34ify so you don't need that extra tool he has in the video? onboard sata will work ?
it seems to me they just want to sell their extra shit if you want a modded console...wtf
can we burn xgd2 also with same settings or this is only for xgd3 ??? plzzz reply me because i want to buy an liteon drive and i want to know everything before purchasing it ....
Just remove your old burner and put the ihas in its place then flash with the flash utilty program that came with C4EVAs firmware and your done. Simple and no need for usbpro (unless your using a laptop)
@4forksache my iHas324b has yet to flash. just upgraded to win7 64bit. any pointers? i also read something about running it back on win xp. stuck as all hell
@4forksache i'm getting a crash when switching over to IDE. back to square 1
do i realy need the ihas i cant just burn games with a normal dvd drive?
do you know where you can download the OEM Firmware for an iHas 124?
do all those ords come in on package?
@crayons102 What OS how are you connected to the computer?
Is this liteon drive internal or external?Is the x360 usb pro necessary?
@MM34ify yes lite on but what should i do now do i need to flash it?
you can buy it on newegg right now for $22 free shipping promo. I just received mine today and it is in fact a B. rev from newegg.
The same happens to me! what can we do!??
x360 usb pro ???
where can i find one of these please and at a cheap price (( UK ))
my drive still says only 7.96gb do you have to use verbtim?
Is there a way I can just put this drive in my pc and not have to use three 360usbpro
Great tut m8. thnx
do you need the other sata cable?
as soon I start burning a xgd3 game I get a error and thelieon stops orkin I ought 2 and they oth do it with the xgd2 it works great or if you down load xgd3 games it works fine just not for making back ups of xgd3 games so I went out and bout a benq drive flashed it with the o800 firmware and it works great
so can we play online games after flashing easily?
very nice explain
Link to the guide or pack you got the guide from would be nice
verbatim , you flashed the player so it can burn the full capacity of the double layer dvd , otherwise you will get errors
i thought it was the ihas124-b to burn xgd3??
@MM34ify Well I burned a backup of MW3 lately and I got 95% disc quality with nero discspeed test
is that safe for live? i ran my mw3 iso through the latest abgx also
ok i have ihas 324b and i use latest imgburn and all isos i use are patched. I sm burning my discs at 2.4x with opc off and burn proof off and calculate optimal. at 50% verification, the burn fails after i receive an I/O error. How do I correct this??? Someone pleaseeee tell me! I also have burner max
Hi, do I need the x360 USB..thing or do I just need the software and an ihas
@peterjam use image burn.
Hello, I can use in LiteOn iHas124 Model C?
can you get it so it will work with a laptop via USB???
@MM34ify and after that its ready to burn games?