Nice. I purchased your PCBs to upgrade the less elegant rumble PCB I originally used. Much cleaner design with less wires. Do you plan on posting a video doing the same for the Guncon2?
I was initially planning to, but it wouldn't be much different, as the GC2 PCB has the same components as the GC1 one, with only the extra dpad connector. Maybe I'll do another video later on.
If you don’t have a place to break the ferrite core on the cable you can de-pin the header and pull the wire through. Just go slow to make sure you don’t bend the pins
Oui oui baguette.
Bon... j'vais bientot craquer je sens...... :)
Nice. I purchased your PCBs to upgrade the less elegant rumble PCB I originally used. Much cleaner design with less wires. Do you plan on posting a video doing the same for the Guncon2?
I was initially planning to, but it wouldn't be much different, as the GC2 PCB has the same components as the GC1 one, with only the extra dpad connector. Maybe I'll do another video later on.
superb, I just bought your PCB's and going to get started soon. Just need to buy a license from you first
If you don’t have a place to break the ferrite core on the cable you can de-pin the header and pull the wire through. Just go slow to make sure you don’t bend the pins
@@PsychoVision19 that's another solution, but way more tedious and time consuming I think 😄
Where do I buy these components from in the uk
you've been waiting 7 months for a reply. Not good
Are D1 & D2 the same part ?
What is the problem with the aliexpress IRL540 ?
Do you have a link to the LED's needed ?
Many Thanks
yes, same. the aliexpresse IRL often have quality control issues, so YMMV.
@jaybee1584 hi thanks , what value is the capacitor? And can a radial one be used in its place. Thanks again
Bon y’a plus qu’à 🥹🥹