@@KevinBigg What's wrong with hauling cattle? I know alot people that has kenworths, internationals, cracker box, fords, etc... that hauls cattle. Not just peterbilts haha. C'mon.
Man the full fenders would help protect your trucks and the gooseneck trailers that you’re most likely to haul! Oh well at least your doing away with those quarter fenders.
I think he will probably regret not going full fender after a few rocks ding his super nice trl, but almost anything is better than what was on there...
Those fenders you had are just fine. They are functional. Been around half a d full fenders. They always get ripped off if on anything but pavement. I’d go with half fenders at most
Dude can't wait for the install vid thoes are gonna look bad ass, any thoughts on doin the plates across the chambers with lights and inbetween the tanks with lights and then a full deck plate with the logo painted on would be 🔥🔥🔥🔥🔥
I love the look of the half fenders. But with pulling the race trailer the full fenders would have been better so u don't have any rocks or other debris messing up the frt underside
When do you plan on making the frame longer and how long a.re you going to make it 270 or 295 wheel base . You might have to put an extra bracket for the front bottom soo they do not bow back on you . Keep up making this truck look better are you going to put the full lenght deck plate on it from the back of the bunk to the end of the frame .
God I wish peterbilt was sold in Australia but I don't think a peterbilt would handle Australian conditions I pull 3 140 ton or 280000 pounds and 4 trailer 200 ton or 4400000 pound road trains
Def shoulda gone with full fenders man 🤦🏽♂️🤦🏽♂️ especially on a non working truck. It’s the dream situation for some beautiful full sized fenders… it will still be bad ass don’t get me wrong I’m excited for it. But missed opportunity!!! 😭😭😭 oh well not my truck lol maybe next a nice bracket that hangs the mudflats with some lights 👌🏽👌🏽👌🏽🤌🏽🤌🏽🤌🏽
@@ciaranxr8 why not? In the event he actually uses the fifth wheel hitch on the truck there's no cover to fiddle with, also no grease needed on the aluminum plate and looks great
Full fenders would probably be better for pulling your trailers that don't sit over the rear axle. You'd be surprised how much and how far just that rear axle will throw rock and crap
Would be nice if they gave us a 50% off code. I’ve been needing fenders for awhile & can’t Pull the trigger on something so expensive just to get beat up from the road & them AG380 bracket prices have me choking.
But this isn't a work truck lol. Full fenders for protecting the trucks when he pulls the flat gooseneck and for protecting the race trailer. Dude is gonna have some chipped up paint
Ya know two websites that used to be big time dealers for vehicle parts that have probably lost a ton of customers because their websites sick is lmc and summit. Those two have got to be the worst websites to try and navigate to the parts you want to look for, for your vehicle haha I mean its bad. So a company that really dumps brain power into their website is damn near locking in a sale ❤
I’d say full fenders if your going to pull gooseneck with your beautiful builds on it so you don’t kick a rock up and bust a window out every time I hauled a hoe or anything on my lowboy full fenders is the only way to go saves your windows for sure
*Greg says: Never gonna really go "off road"* In 2 months...we're going to see greg 1) Stuck off road 2) Hammering gears through gravel..... 3) Pulling out the 05 with the pete....... * HAHAHAHAHAHAHAHA
Alot of talking in these videos not enough stuff going on u lose. Interest the caption says Peterbilt gets new parts we didn't see no new parts but a lot of talking
NO trucks in Left hand lane, I know your from NJ but no need to make the rest of us Professional Drivers look Bad !!! People from NJ like to park in Left lane but don't be That GUY...
YOOOO!!!! We're taking the 05 and the first gen to our local track tonight (6/29) if anyone wants to come out!!!! Beach Bend Raceway Bowling Green KY.
You
When are you going to start doing mods to the engine on the Pete and tuning for it? I’ve been waiting for months!
Hey Greg u outta get an Iowa customs Deck plate and look up ez pete interiors they will make u any color interior u want for ur truck
Somebody didn't check the weather forecast!
"Low and cool" I feel like double round would fit that bill perfectly
Full fenders will protect against rocks and when u pull the gooseneck and bobtail plus a better look or the double hump fenders
Wish you would of went with full fenders I like the half but full fenders omg 🤤
Agreed
Yea full fenders all the way
Greg talking about playing farmer like the truck is going to actually see that kind of work lol
Every Peterbilt owner wants to me a bull hauler at some point lol
@@KevinBigg not this one, I enjoy being home and I'm too far to deal with loading and unloading cattle
@@KevinBigg What's wrong with hauling cattle? I know alot people that has kenworths, internationals, cracker box, fords, etc... that hauls cattle. Not just peterbilts haha. C'mon.
Man the full fenders would help protect your trucks and the gooseneck trailers that you’re most likely to haul! Oh well at least your doing away with those quarter fenders.
Quality of details, workmanship and materials say a lot.
Glad yall went with the half fenders really the best lookin fenders...
Fenders are going to look amazing!! Will you be adjusting the rear ride height a bit? Maybe get it a touch lower in the rear....
I think he will probably regret not going full fender after a few rocks ding his super nice trl, but almost anything is better than what was on there...
Truck looks good. Can't wait until fenders are on. Now u need a polish fifth wheel plate. Great job guys.
Yes Sir about time now that truck is top level 👌
The double hump fenders would have looked amazing. Especially when your pulling the enclosed trailer....
Love the hogebuilt products
Now you just need an interior
Those fenders you had are just fine. They are functional. Been around half a d full fenders. They always get ripped off if on anything but pavement. I’d go with half fenders at most
Dude can't wait for the install vid thoes are gonna look bad ass, any thoughts on doin the plates across the chambers with lights and inbetween the tanks with lights and then a full deck plate with the logo painted on would be 🔥🔥🔥🔥🔥
Deck plate yes it's handy to walk on when hooking up trailers or turntable work
Cant wait to see them on
Now it’s time for a custom tail light panel
Love the big truck stuff
Would love to see the Pete with an all black Wilson hopper trailer behind it
Like Ezra's new trailer.
Or Eby generation…
I always wondered why fenders cracked...learned something new everyday.
Damnnn. Those double hump chrome fenders would look so clean on that thing!!
Big Pete looking good rolling down the road boys 💪🏻💪🏻👍👍
Cannot wait to See how the truck turned out
After installing like 20 pairs of these. It’s easy peasy
Can't wait to see them on
full fenders ftw
Lets see it, can't wait
I love the look of the half fenders. But with pulling the race trailer the full fenders would have been better so u don't have any rocks or other debris messing up the frt underside
So you going to finish up the back with a nice t bar set up or a nice light panel? Keep up the great work
Need a low air leaf cut off. It will drop it down to match front
My suggestion: Wire the outside lights on the back of the cab to the blinkers and the inside pair to the brake lights
I doubt Greg will be playing farmer with that front bumper being that low...
He said coming about getting a lift bumper awhile back
He could just add that thing i see that makes the front bumper flip up to get ground clearance
Did you get your LED headlights figured out?
Learned a thing or 2 on this vid
I would have run a lower profile tire on the rear axles. That way it would be level with the front end.
Finally! 👍
20:49 is the a supra
Them things need color matched IMO
When do you plan on making the frame longer and how long a.re you going to make it 270 or 295 wheel base . You might have to put an extra bracket for the front bottom soo they do not bow back on you . Keep up making this truck look better are you going to put the full lenght deck plate on it from the back of the bunk to the end of the frame .
God I wish peterbilt was sold in Australia but I don't think a peterbilt would handle Australian conditions I pull 3 140 ton or 280000 pounds and 4 trailer 200 ton or 4400000 pound road trains
Yeah bruv some are here in aus and I think can be ordered from paccar/kenworth dealer
@@ciaranxr8 I might have to ask around
Good Choice Greg! I couldn’t stand those little eyebrow fenders that were on there 🤙🏼
Full finders are cool until you blow a tire and realize you wasted money on them
Def shoulda gone with full fenders man 🤦🏽♂️🤦🏽♂️ especially on a non working truck. It’s the dream situation for some beautiful full sized fenders… it will still be bad ass don’t get me wrong I’m excited for it. But missed opportunity!!! 😭😭😭 oh well not my truck lol maybe next a nice bracket that hangs the mudflats with some lights 👌🏽👌🏽👌🏽🤌🏽🤌🏽🤌🏽
Would like to see a cool fifth wheel cover.
Or a polished aluminum fifth wheel
Yeah but is it practical... probably not
@@ciaranxr8 why not? In the event he actually uses the fifth wheel hitch on the truck there's no cover to fiddle with, also no grease needed on the aluminum plate and looks great
@@glennrobichaux7490 and have Mr. "Almost Chrome" polish it out.
@@glennrobichaux7490 LMAO definitely not
Should have put full black fenders on it
All the black an minimum of chrome id get some finders but paint them black
Why not complete the look by adding some wrap around custom fenders in gloss black???
Wish you would of went with the full fenders but they will still look good. Trucks looking good man
Love to see the truck with a cow trailer that would just complete it
Full fenders would probably be better for pulling your trailers that don't sit over the rear axle. You'd be surprised how much and how far just that rear axle will throw rock and crap
Luv from india❤️
Yea come on I'm get n jiggy with the jams
Would be nice if they gave us a 50% off code. I’ve been needing fenders for awhile & can’t Pull the trigger on something so expensive just to get beat up from the road & them AG380 bracket prices have me choking.
Half fenders are definitely the most popular fenders on work trucks
But this isn't a work truck lol. Full fenders for protecting the trucks when he pulls the flat gooseneck and for protecting the race trailer. Dude is gonna have some chipped up paint
I actually like the rear fenders on the tractor I think if you have a tire problem it’s easier to change a tire with the fenders you have!!!!?????
FULL FENDERS OR BUST!
Greg remember Cats like low rpm lug. Don’t over rev a cat. Cummins like the rpm not big cats
When is the next give away? I think it should be a welder!😉
👍👍👍👍
Hogebuilt Is the way to go.
Ya know two websites that used to be big time dealers for vehicle parts that have probably lost a ton of customers because their websites sick is lmc and summit. Those two have got to be the worst websites to try and navigate to the parts you want to look for, for your vehicle haha I mean its bad. So a company that really dumps brain power into their website is damn near locking in a sale ❤
Full fenders only lol
🤙🏻🤙🏻🤙🏻
If i had a dollar for every ! greg uses in his video names i'd be a pretty wealthy man.
Yaay
Go with the ultimate low rider fenders
No one can make fun of you gotta get a 5th wheel cover and a sliding 5th wheel hitch
I’d say full fenders if your going to pull gooseneck with your beautiful builds on it so you don’t kick a rock up and bust a window out every time I hauled a hoe or anything on my lowboy full fenders is the only way to go saves your windows for sure
Can’t go farming anyway look what you did to the front bumper pulling it into the driveway!!!!!!!
The pete would be cooler with some massive compounds 😁
You paid for em right
*Greg says: Never gonna really go "off road"* In 2 months...we're going to see greg 1) Stuck off road 2) Hammering gears through gravel..... 3) Pulling out the 05 with the pete....... * HAHAHAHAHAHAHAHA
Instead of throwing a bunch of accessories all over it, how about 1st you get that frame blasted and painted. It's looks pretty rough so.......
you can't play Farmer ,you don't have aux hydraulics on your Pete. (needed for dump trailer or walking floor)
You don’t need a wet kit to run a grain trailer
Can we please get the Pete to roll the black smoke
Need to turn the motor up a little bit soo she can roll coal
That’s like 10 minutes from my house
Double hump was the way to go not half fenders 👎
i wanna see paint match everything. grill, headlight/bezels, tanks, and it would be unique to have matched stacks
First!
omg no wayyyy 😳😮😮😮😱😨😱😨😱😱😱😱😱
Alot of talking in these videos not enough stuff going on u lose. Interest the caption says Peterbilt gets new parts we didn't see no new parts but a lot of talking
NO trucks in Left hand lane, I know your from NJ but no need to make the rest of us Professional Drivers look Bad !!! People from NJ like to park in Left lane but don't be That GUY...
All talk, no action.🙄
1st 👍🏾👍🏾
for real 😨😨😨😨 omg 😱