How fast can you change a MTB tire?
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2023
- Dexter crushes the Tire Change Challenge and does it to the level as if he was doing it for a customer.
Be sure to check out our great selection of apparel on our website: www.berkshirebikeandboard.com... - บันเทิง
Not gonna lie, kid does better than me, took me over an hour to change mine, I got some work to do
How foes it take you a hour to change a simple tyre
@@BokiRS 1. I don’t got the tools needed, 2 it was my first time, 3 idk what i had to do
@@LJB001 i use normal screwdriver
@@LJB001fair enough then 😂
@BlackFlag714 why u hatin on people learning 😅
if it was tubeless that would be a whole other story😂
Tubeless with inserts
@@ianloomis673+ DH casing
Tubeless would have probably been faster haha
With downhill casing it will be a lot harder 😂
@@stevecabrera6718 never they are stuck to the rim it’s crazy
As an ex professional bike mechanic, I fully endorse the garbage can for wheel changes, that’s a pro move there. He can probably get under 3 minutes if can crack the bead and unseat the tire with just his hands. Popping both sides of the bead into the rim channel will make it easier to no tire lever the change.
Little mans a machine!
bike "mechanics" aren't mechanics. Bikes are skill-less machines to fix.
@@heyjaypay4521 Ok there bud 😂. Do me a favour and go take a Walmart bike fresh off the floor without adjustment down a blue run at a bike park and let me know if you still feel that way.
@@fraserdavidson6900frfr
@@heyjaypay4521 lmfao you sir are a fool and probably got zero on your Jpay
Kids impressive.. he's blessed too have learned from you guys
.
"now that we know what your capable of.....we'll be expecting 15 tire xhages an hour" 😂😂😅
you saved so much time by showing how to tire with palms. thank you so you saved 3 hours of my time. once again, great technique from the youngster
Extremely impressive.
as a BMX racer, bro, he’s like two minutes lower than me
Ok daddy
Hes so fast! And that's cool that you're a BMX racer.
@@liamgreen3493 That's WILD.
Pro tip: it’s even faster if you pop the bead while its in the stand, rip the tube out and cut it in half to get it out. Then remove the wheel. This way the only thing you have to do on the ground is put the new tube in. Makes life a lot easier when youve got to get these done in 5 min or less for customers
Just be careful when cutting the tube or you will have a good excuse for new tire😂
Amazing!!! Great job and loved his confidence!
His voice sounds like the trickster tik tok voice effect
Dexter got some dexterity! Great stuff 🎉
Father raised him well
Took me four days to fit an inner tube and a tire to my back wheel kit bike but I used that trick where he lays it flat on something and it makes it a lot easier 😂
What a Pro!👍
Hes so smooth with it bro!
I was a full time bike mechanic for 3+ years and the fastest I've found and removed the problem from the tire and install a new tube and back into the bike just under 5 minutes. If you want to make sure your customer doesn't get the flat again i check the tire and wheel very thoroughly. Awesome work by the kid btw!
Couple months ago i realized i never changed a bike tire tube. Took me about 20 mins. Alot harder than i thought itd be. 😅
Keep practicing and then let us know when you’re ready to race we’re going to keep pushing the limits here so you’re up next !
@@berkshirebikeandboard6020 in ready
Now try it with a 28-633 Schwalbe marathon plus.
Nicely done
People still finding ways to say he couldnt do it with tubeless🤦♀️
Bro is insane with that tire change takes me about 45 minutes good job little dude 👏
Well done Dexter
This kid needs a raise
Ha! I use the trash can method too! Damn Schwalbe beads are hard to seat in the rim
I cut up my fingers doing one this weekend this kids got some moves
As a former bike shop employee I love the strategy with the rolling of the hands and the trash can the only ting I got to say is if you get a flat bud take some time to check the tire for thorns but you did amazing keep up the fast work 👍
That wasn't the challenge though, to check everything. The Challenge was how fast he could fix it.
Good work little man keep it up very impressive
I have spotted something beautiful in the background
Way to go... Great job
city rider here... you have to line the tube up to the tire and dig out whatever made the hole, or you just puncture the new tube too. you write "chain" on the chain side by the stem so you can get that right and know where to look. i'm pretty sure i can do it in 10 - that's roadside, not a shop.
He’s brilliant.
he forgot to check the tire a lot of times you don't know if it's like a thorn or a nail you got to inspect the tire inside and out thorns are number one cause of flats
It wasn’t really flat. He’s not trying to waste some time looking for something that doesn’t exist.
I was gonna say the same thing! anyone can replace a good tube fast with another good tube, but checking for real flats take a bit more time and patience
the trash can move made me smile, he has been around in a shop
WOW kid Good JOB! would took me so long! haha xD
Kid's Got Talent ! for sure! Bless him!
Pedro’s levers 💯
Keep rockin' it ❤Dexter!!!
He’s quick at changing inner tubes
I've seen a video where someone did that in under 45 seconds.. like what??? He was on the bike afterwards🤯
Irl you gotta check what caused puncture and feel tire. Learned that the hard way.
With loads of time too spare - kudos kid
Bro humbled himself
All good! ☺️☺️☺️
Except the part about not checking the tyre.
Put him on work experience! 😁
You better give that boy a job
Me using flat screw driver to pull out my old tire🗿🗿
I did my back wheels new inner tube and it took me about 40 minutes so well done 😂
Respect. It takes me around 6 minutes.
I think 🤔 the kid didn’t get the memo 📝 as he changed the inner tube not the tyre 😂
As a professional bike tech myself,I think he did great! All kids "SHOULD" be able to change their bike tires/tubes like this little man!..don't have to be under 5 mins just in general, but unfortunately, kids these days just don't want to learn or lack of parents or friends teaching this generation hands-on experience and knowledge
Lucky, I just had to do this but I had to flip it upside down to do it.
Yea that is more of the standard when ‘out in the wild’ haha we’ll do some like that soon !
As a bmx kid i was like holy shits such a longer process
next give him a 25c folding bead on a hooked wheel
Yeah especially if u have to do it on the side of the road when it’s -5 degrees (celcius obviously) and the tyre is cold af and doesn’t want to budge at all
tubeless with Cushcore would be a 10 part movie
I thought my 10 minutes was good, but compared to him I'm league behind him
😮
Nice job
best way to put the tube in, norns trash can, sit down and put the wheel on your thighs, also make sure to check for anything inside then tire that could still be there, other than that this kids great
Champion❤
Respect!
Let’s see him do a tubeless tire next 😂
He did about as good as I would have done but I have over 20 years of experience.
Bro got the fastest pit stop
Clean asf kiddo
Now, if that was tubeless, he was changing that I’ll be a messy situation
Insane😮 i love this dude! please be my teacher😂
Damnn thats one impressive kiddo
Bro can beat me 💀 i can t even change my tire and need to go to a shop...
Now try with a road bike tire ! Would be interesting. They're a bit harder to get on and off the rim
YO IM DEXTER
Make sure there's no glas or other sharp remains so as a mechanic for clients it will definitely take at least 1 to 4 minutes longer
True!
Yes, true but again that wasn't the point of this challenge, the point of the challenge, he got all 5 stars and extra credit.
Did anyone else notice he still has reflectors on his rims
I wish dirt bike tires were this easy!😂
Give this kid a summer time side gig! Let him learn the value of a dollar and with time and responsibility he can buy a new bike or whatever he wants!
I know this is for speed but you should check for thorns or something that caused the flat if it was a real puncture, the thing that flattened the tube could be still in the tire.
amazing
so your saying this kid took 3 minutes yet the bike shop i went to took all night and morning
he didn't have a flat he just needed to put air back in it
Im still sitting here waiting for the tyre to be changed...
Me still waiting for him the change the tire
Question: I’m new to MTB and just recently started taking it up as a hobby. Can any bike use tubeless? I wanna upgrade tires to Vittoria tubeless
Thats quicker then subway makes my sandwhich
I wished my tyres got off and on the bead that easily
That's pretty damn fast. I am cool when I do it in five.
That's changing a tube not a tyre 💀
This kid has better bike than mine
Killer!!! But what if it had been punctures by a thorn? 😢
dexter my guy
Without any past experience it took me over 2 hours
As part of the process, should have checked inside the tire for anything that could have punctured the tube. Still would have finished in under 4 minutes...Wow!
Now to it with tubless dh tires 😅
HOW😮
What is the easiest gear to change the tire?
1st smallest sprocket more chain slack
Next i want to see how fast he can install cush core
that spok is crying on the bin😂
Him: 3 minutes 😮
Me: 3 hours 😂
Pretty good it takes me like 5
i wanna see him taking off the tire and inspecting the tire and the tube in case of puncture
i have the same exact tyre on my mtb
Now do it with TubeLess… 😎
👍
Dam bro wish my dirtbike tires only took three minutes
falto revisar la cubierta por que las espinas suelen quedarse atoradas
One bacon bit and co2 cartridge for me 😂
On the older bikes you just need a 15mm and a tube😅
As a dude that uses cheap ass tires and gets a puncture every second ride I'd bet I'm holding a world record at this point
You need to go tubeless