Learn Prestressing Work! [Sample for Educational Purposes Only]
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- This video is for those who are new in the industry. This is a simple educational video illustrating basic step on how to do stressing work using multijack.
Special thanks to Mr. Guna and his team who contributed this wonderful raw video for our community to understand stressing work. Stressing work is as important as design work. Good luck.
Design Connexion is a Platform of Design Modules for Prestressing Works. Currently We Can:
1) Provide Tendon Radius Check
2) Provide Profile At Center & Soffit Of Duct
3) Provide Profile Using 1m Interval
4) Provide Prestress Losses & Elongation Calculation
5) Elongation Summary Compiler
6) Provide Tendon Plan Profile Losses
Drop Us An Email For More Info.
Our Software Is Up For Subscription Now.
Email Us At:
sales001.dc@gmail.com
---------------------------------------------------------------------------------------------------------------------------
Music by:
Dune by Alex Productions is licensed under Creative Commons
Attribution - ShareAlike 4.0 International Licence.
/ alexproductionsmusic
Music provided by www.plugnplaymusic.net
Best video., thanks 😊
I'm glad you liked it!. This content was contributed by a prestressing engineer in Malaysia
I never get tired of whatching this video. Definitely very good content presented. You are to be congratulated!
Thank you 😂
It's nice video but still I see much steel bar on the slab ,this technology help's to reduced steel,cement & weight of the building. Or you have reasons for that .Thanks
😊 hello there. The slab reinforcement that you see is pure conventional rc (no tendon inside)❤
Thanks
Welcome
Very very very good this is video! Friend's, Can you explain to me how I can calibrate the jack and pump together to make sure that the pressure adopted in the pump is providing the force in the jack? My jack is mono-stressing jack.
Thank you. I have replied your email. Cheers
Sungguh cara yang sangat bagus., terimakasih teman anda telah berhasil melakukan pekerjaan ini.👍🙏🇮🇩
❤
Post tensioned rusty wires are an instant red flag. Having seen post tensioned wires before, they are meant to be completely clear of rust.
Hi, It is always the best to have a clean and clear strand surface. However, that's not always the case. Surface corrosion with no pitting still can be used. Once stressed, grouting will be conducted. =)
kabel 15.6mm ke pakai bos
15.24mm
why are your tendons full of rust
Light rust is still acceptable as long as no pitting on the strand surface.
How old is your jack? So slow. So many unnecessary movements.
Hi, It is an old jack. I do agree with you that the steps are time-consuming. How do you shorten the stressing work. You can share with us by dropping us an email. Thank you 😊