Thank you for doing the tutorial & putting yourselves out there for the every day person. I enjoy anything that helps me to learn & much of my stuff goes to family/friends or is scaled down to doll size (14.5 in - 18 in). Since I suffer chronic insomnia, it's better to keep myself busy.
Thank you so much for this tutorial. I made eight today! :-) I will have to find your Facebook and share my pictures. These are so much fun to make, and they turn out very cute. Thanks again! 💋
I love the simplicity of this, I like to use SS wire & this technique I end up using just the amount of wire that I need. The recording went out of focus a few times, but I was able to keep up. Thank you 🙏🏼🌺
+jeweltone1 Great to have you on the channel and thanks for the lovely comment. You can see more tutorials and inspiration over on our site tutorials page: www.jewelleryschoolonline.com/tutorials/ Best of luck with your jewellery making :-)
+Isabelle Kulow Thanks Isabelle - great idea! If you have some long headpins and cut the end off then they should work well (as long as they are not too thin). Thanks for sharing :-)
These are beautiful. Don't you think the bottom half loops would lay better if the loop was turned sideways? That way they don't stick out on the side of the finger. Thanks
@Jewellers academy, which type of wire can I buy on a very low budget to buy make n sell jewellery and what thickness do I need hun, desperately need your advice, your an extremely EXTREMELY talented person, beautiful jewellery 😍 ❤❤❤
Have you worked with stainless steel before? I'm allergic to every metal besides that and so I'm attempting to make my own and I'm finding that it's a lot harder to work with than other metals. Any advice?
Hey Cassie, no I haven't worked with stainless steel, it is a very hard metal in comparison to the regular precious metals. I'd imagine it might be hard to hand make stainless steel jewellery, and that you might need to manufacture/buy in parts in order to make jewellery. Is this what you have found so far?
Great tutorial! I'm wondering if the gemstone part should be a little floppy? If you hold the ring from the base, the top flops down. I made a few with the same issue. Suggestions? Thanks!
Thank you. I've been looking for stacking rings. This is perfect.
You are so welcome! Glad you enjoyed it x
Thank you for doing the tutorial & putting yourselves out there for the every day person. I enjoy anything that helps me to learn & much of my stuff goes to family/friends or is scaled down to doll size (14.5 in - 18 in). Since I suffer chronic insomnia, it's better to keep myself busy.
Thank you so much for this tutorial. I made eight today! :-) I will have to find your Facebook and share my pictures. These are so much fun to make, and they turn out very cute. Thanks again! 💋
Love the rings
Thanks! Hope you enjoyed making them x
So pretty, I love it ‼️
Thank you! 🤗
Wow nice ring I have to try this.Thank you for sharing this video.😃
You're welcome x
I love the simplicity of this, I like to use SS wire & this technique I end up using just the amount of wire that I need. The recording went out of focus a few times, but I was able to keep up. Thank you 🙏🏼🌺
very nice idea. I love stacking jewelry.
Your creations are lovely!!!☺️☺️
Thank you! 😊
Cute little rings! I am going to get mine hubby to make me some.
Very pretty little ring looks easy to make! Thank you for Sharing!!
+Elizabeth Vallely Thanks Elizabeth, it is a nice simple one. Thanks for the lovely comment and best of luck with your making :-)
So cute rings. !!
very nice ring looks easy to do, thank you for sharing!!!
These are so cute!
thank you for sharing I loved the ring you made.how fun.
These rings are so wonderful! Thanks for sharing!
high71000sfg5
OMG! In my country they are earrings. But rings are beautiful too.
Nice nails was my first thought lol ty for the tutorial! I am off to my work room ❤️
Great tutorial! Glad i found you, i need new ideas and I'm not quite a designer , yet ;-)
+jeweltone1 Great to have you on the channel and thanks for the lovely comment. You can see more tutorials and inspiration over on our site tutorials page: www.jewelleryschoolonline.com/tutorials/ Best of luck with your jewellery making :-)
Really pretty....I am going to make me and my fiance matching rings...
lovely have to try this !
Thank you. That was easy.
I would like to make a pearl necklace with matching earrings. 🌷
Great idea! You should give it a try. Check out our necklace making tutorial which may help... th-cam.com/video/6niayfK7V4g/w-d-xo.html x
Head pins in place of wire would be an alternative. I don't own a lot of wire, but I have head pins. I will try this, they are beautiful. :)
+Isabelle Kulow Thanks Isabelle - great idea! If you have some long headpins and cut the end off then they should work well (as long as they are not too thin). Thanks for sharing :-)
I was think8mg the same! When you make them for charity they need to be cost effective
Thank you for such a great video, what a great idea!!
Very nice!!!
Well done 👍
These are beautiful. Don't you think the bottom half loops would lay better if the loop was turned sideways? That way they don't stick out on the side of the finger. Thanks
That was my thought exactly! Beautiful and simple. I love this tutorial.
Love it. Can you make pearl rings. I don't know how to make a hole in the pearl.
Thank you
@Jewellers academy, which type of wire can I buy on a very low budget to buy make n sell jewellery and what thickness do I need hun, desperately need your advice, your an extremely EXTREMELY talented person, beautiful jewellery 😍 ❤❤❤
Hey lovely, Here are a list of suppliers that we regularly use www.jewellersacademy.com/jewellery-supplies 💖
Beautiful, could you hammer a little to harden the wire. Obviously the bit without gems 😊♥️?
Yes, absolutely x
Hi there, thank you so much for inspiring always!! quick question, is it ok, to use 0.3MM wires instead of 0.4MM? and 1.0MM instead of 0.8MM?
Cute rings
Hola dónde está tu taller, gracias
I like that project I will be trying ❤️
loved it wow
Have you worked with stainless steel before? I'm allergic to every metal besides that and so I'm attempting to make my own and I'm finding that it's a lot harder to work with than other metals. Any advice?
Hey Cassie, no I haven't worked with stainless steel, it is a very hard metal in comparison to the regular precious metals. I'd imagine it might be hard to hand make stainless steel jewellery, and that you might need to manufacture/buy in parts in order to make jewellery. Is this what you have found so far?
nice idea!!! Could you wire wrap the shank of the ring? I would think it would be sturdier, as rings and bracelets take so much wear and tear.
+Marlene strait You could indeed - great idea :-)
Marlene strait 5
Marlene strait My icon is the same as yours by default and I thought your comment was mine 😂 I was so confused
Marlowe T b
Marlene strait - love your last name dear! Happens to be mine as well. 😉
Great tutorial! I'm wondering if the gemstone part should be a little floppy? If you hold the ring from the base, the top flops down. I made a few with the same issue. Suggestions? Thanks!
krazeekatladee Mine turned out the same way, but we’re still beautiful.
cute. thank you for sharing
Could the 3 rings be interwined permanently in the back of the together or does it give more versity to wear them together or seperately?
lindisimo mil gracias desde argentina besosssssss
Marta Pomesano nice ring
Superb
I would like to learn to make a ring that spirals up the finger N is twisted wire
+Pynkie Shearer Thanks for the suggestion we will see if we can do a tutorial like that for the channel. Best wishes Jessica :-)
very nice
Can you make Native American bead earrings plz thx love the videos they are easy to understand
Is the silver wire silver plated?
can you show how to make a wire ring with a tear drop shape bead please ?
+Stephenson Val Hello, thanks for the comment. Yes will add this to the list of tutorials to make for our channel. Stay tuned :-)
I wan see more video thanks
We have lots more on our TH-cam channel but do check over on our website at www.jewellersacademy.com for more in depth courses! x
wow
Super
it would have be nice to see it a little close and in focus
Agreed - you definitely need a good camera for demo-ing jewellery making!
very very ni❤ce
LIKE.
💙💙💙
I see u have a spot for US measurements but they are blank:( could u add them to future videos please.
wow..
/
can you make me one
they are very pretty, love'm but I wish it wouldn't be so blurry it's annoying. most of your video's are like that. So Please fix it. Thank you :-)
loved it wow