2nd Cleanest Accord i've seen. (mines is first ;) ) How to Achieve Look - YES, You will need to roll your Fenders. Front and Rear - Rear Camber Kit is not needed but good for adjs. (alignment too) - Research, research, (the offset and tire size will either make or break your build) - Going that low will have some axle problems (replace your CV axles) - Modulo Front Lip. - Black Sport Grille. CAUTION!!!! *prepare to break necks.*
@@dbanddz The wheels alone about 2500-$3000 Work Emotion Cr2p Modulo Lip kit - about $130 (unpainted) ($300 to paint near me) Sport Grille - $100 BC Racing Coil lovers Extreme Low - $1,000 J-Power 6pc Camber Kit - $200 Fender Rolls (depends on the tire shop) ($60-100) Tires (depends on the brand) - $120-230/Each Optional Mud flaps/guard - $18-30 so and estimated $5 too 6K on this look
The cars stance is probably the best I have seen on any car! I mean the wheel well pretty much just outlines the rim. It’s gorgeous! If you don’t mind.... where did you get your work done at?
That car is badass! I like it even better because I'm picturing myself in mine, but looking like that. I guess just tinting my windows is child's play, ha, ha! Ballpark on cost to do?
I got my 2015 EX in 2019 w/42k miles on it I’m tryna fix it up like this. Mines the light gray one. Going with the chrome delete window visors mud guards same lip spoiler as yours and some Enkei Phoenix rims
I recently bought some Advan RZII rims (19x10.0 et35/275/35/19 rear: 19x9.0 et35 245/40/19 front). I bought the Eastwood fender roller and planning on doing the job this Wednesday. The tires are rubbing only on the inner edge of the fender. I don't believe I need a lot of fender rolling and I've watched several videos on the method (using the heat gun and doing it SSLLLOOOOOWWWW). Any advice? I hope my car doesn't end up looking this. I don't understand how all those bends got into the body. Did they not use a fender roller and instead used a baseball or something? Curious to know so I don't make the same mistake. Anyone?
Hgog hfsant, thanks for the reply. I didn't mention it but I have a 2017 Accord V6 Coupe. Are the coupes and sedans different in this way? So just keep it hot and doing it slow? How long would each fender take if I'm only doing 15 inches of the fender (7.5 inches from the center)?
That Accord is FLAT out Sexi & Clean! Not over nor under done!
car is so beautiful it should be in a art gallery
The nicest accord 😍
sweetest 9th Gen on the planet(personal fav)!!
2nd Cleanest Accord i've seen. (mines is first ;) )
How to Achieve Look
- YES, You will need to roll your Fenders. Front and Rear
- Rear Camber Kit is not needed but good for adjs. (alignment too)
- Research, research, (the offset and tire size will either make or break your build)
- Going that low will have some axle problems (replace your CV axles)
- Modulo Front Lip.
- Black Sport Grille.
CAUTION!!!! *prepare to break necks.*
how much for all that?
@@dbanddz
The wheels alone about 2500-$3000 Work Emotion Cr2p
Modulo Lip kit - about $130 (unpainted) ($300 to paint near me)
Sport Grille - $100
BC Racing Coil lovers Extreme Low - $1,000
J-Power 6pc Camber Kit - $200
Fender Rolls (depends on the tire shop) ($60-100)
Tires (depends on the brand) - $120-230/Each
Optional Mud flaps/guard - $18-30
so and estimated $5 too 6K on this look
@@dbanddz that’s actually not all that bad
Nice work and nice ride. TENNESSEE STAND UP!!!
It's very well done son but remmber love God of all things and family its inportant nice whip
Shelby farms Memphis TN.. I live near this.. Very clean bro💪🔥 #slammed enuff
Digging those black metallic 5s too!!!!!
The only people that would hate this are blind haters of the Honda badge. Much respect to this man!
Those wheels...absolutely beautiful!
I felt in love!! i cant wait til i get mine!
Love the blacked out grill.
Saw the Chattanooga sign on the interstate
Also have a 2014 black accord
nice love everything bout this
Very Clean just and tint on the windows and that's it.
A O. No dirt and dust. So clean..
very clean set up... good job!! i got the info about the brand and the size of the wheels thanks for sharing. cant wait to put on my touring 2014
V6 13 accord owner here also in nashville, those wheels are savage af! Awesome job on the car bro!
I'm getting my coilovers soon. Thanks for the inspiration
just picked up my accord and damn man your ride is DOOOOOOPE!
WOW.....just WOW.
Loving the car and the music! Nice setup brother! Keep up the good work!💯
man i love this accord and mine. wonder how mine would look like this and the tinted windows it has
Thanks for the info Nicholas
The cars stance is probably the best I have seen on any car! I mean the wheel well pretty much just outlines the rim. It’s gorgeous! If you don’t mind.... where did you get your work done at?
That car is badass! I like it even better because I'm picturing myself in mine, but looking like that. I guess just tinting my windows is child's play, ha, ha! Ballpark on cost to do?
This would look even better with tinted windows, but it's a beautifully modded car. :-)
Very clean ride.
Car is fucking stock besides the stance and the wheels! This shows you can keep it simply and still have a show stopper! Flawless!
I got my 2015 EX in 2019 w/42k miles on it I’m tryna fix it up like this. Mines the light gray one. Going with the chrome delete window visors mud guards same lip spoiler as yours and some Enkei Phoenix rims
Looks great..
Whoa. Nice and clean
A beautiful piece of art!! Great job bro!! A++ 👍🏼
Right rear fender is all messed up from a bad roll job. Look closely at 02:10.
MaXGTS1 I thought I was the only one that notice
MaXGTS1 I saw it to, man but love these wheels
I recently bought some Advan RZII rims (19x10.0 et35/275/35/19 rear: 19x9.0 et35 245/40/19 front). I bought the Eastwood fender roller and planning on doing the job this Wednesday. The tires are rubbing only on the inner edge of the fender. I don't believe I need a lot of fender rolling and I've watched several videos on the method (using the heat gun and doing it SSLLLOOOOOWWWW). Any advice? I hope my car doesn't end up looking this.
I don't understand how all those bends got into the body. Did they not use a fender roller and instead used a baseball or something? Curious to know so I don't make the same mistake.
Anyone?
Hgog hfsant, thanks for the reply. I didn't mention it but I have a 2017 Accord V6 Coupe. Are the coupes and sedans different in this way? So just keep it hot and doing it slow? How long would each fender take if I'm only doing 15 inches of the fender (7.5 inches from the center)?
So what... It's still a nice car.
I like how you didn’t tint the windows looking clean
Check out my most recent video. He bought a RHD Supra as well!
@@NickJonesFilms damn
@@NickJonesFilms I been looking for what wheels I should put for my Honda any ideas?
@@702s.studios I am a big sucker for Vossen Wheels.....
Damn that is hella clean.I can't wait until to get my accord
Hands down the cleanest 9th gen Accord simple clean lol you breaking necks bro
Very clean. looks cleaner than stock!
I like to know what wheels those are. The accord is clean. Good job!
That is Nice!
Mean 💯 tuff 💯clean 💯
I have a '15..... thats hard in the yard!
Very sick man!!!
That's clean bro Good shit DAT LOW LYFE
what size wheels and offset if u don't mind me asking
So a stock accord with wheels on it? Plain but still pretty dope.
He had it lowered for sure.
He also had the chrome grill painted. Never thought that would look that good (in other words, it looks OEM).
Clean bro
Cool car.
yo sweet car just wondering where u bought that front lip from ive been looking for a nice one for a while
*super clean!*
Add some 35% tint for the classy look other than That sick accord
Fucking a beauty 😍😍😍😍😍😍
What happens on speed bumps?
That’s what I always wonder!
Stuck between these wheels or Vossen cvt on my 9.5 gen accord.
What kind of wheels are those ?
The wheels on this video are work cr2p. All on back order right now and are $2800. Vossen cvt wheels are directional spoke wheels
Thanks you 🙏
wish I could get in touch with this dude. so many questions. how many inches is it lowered? what time tires? any camber?
*size
NOW that's a nice ass car! Its so beautiful and clean! It sits very nice...I LOVE IT bro! Where year model...2015?
I just love ur car bro. What's ur wheel size and width and from where did u order?
What a nice and clean car. love the wheels. Hey, can I know what kind or what brand of coilovers that you are using?
Clean car but I hate it when people post but they don’t ever respond so questions or even like comments left for their vehicle back 🤷🏽♂️🤷🏽♂️🤷🏽♂️
Beuty , que chingón se ve.
Link to wheels please 🙏🏾
Simple but fucking clean 🔥
Where did you get the ground effect kit ? And what's the name of it
Clean n simple
I'm just not sure if I can drop it that low...speed bump central. Would it still look tight?
Get bags lol
What modifications had to be made to make these wheels fit?
Whats the wheel size and backspacing on them?
thats perfect
I'm having hard time finding them online I need a set
Que size son los rines y llantas bro
What coil overs you got on it? Springs?
What are these rims?Ich Will That Buy.Pls give me a Answer.
Where did you get that beautiful grill???
At Wal-Mart👍👍👍🚗
Try driving on L.A. roads with those wheels. Hollywood Blvd, Sunset Blvd, Wilshire Blvd. I'll stick to my 17's. Thank you very much.
what is the size of the rims and type of rims you have on
WORK CR2P
Gorgeous 🔥🔥🔥🔥
hello, curious what the style grill you have is?
Chattanooga Area?
what size wheels and whats the drop on the car?
ما شاء الله تبارك الله
Such a sexy beast. Really diggin the wheels!
looks good yo
Nice car
The ride looks like 50% done, hit it with tint all around then itll be at 100....
Is this the sport model or exl
Is the grille a wrap or what?
Are u using air ride or just springs
How much to lower on coils. Labor, parts , and any special mods.?
what's the name of those rims and the size?
Bro where did you get that grill?
Body kit?
The '15 Accord is so sexy!
Did you have to roll rear fenders
what tire sizes are you running on the rear?
OMG love your car and set up bro. what side are your rims and did you roll rear fenders too? Cambers???
What size are those wheels?
NICE fuckin whip.Great work.
Does anyone know If this is the factory front lip he has ?
Tim Parker na its not
which one is it ?
Where can I get a lip kit for thiscar
What is the tire size?