It Must be centered in the wall. the sticker indicates with dashed lines. Angle must be mechanicaly fastened to the damper on both sides of the finished wall around the perimeter of the opening and one side of the connecting ductwork must be a breakaway connection, usually the unoccupied space.
Thanks for the video it was helpful, but just have a question, " do you know if you require a smoke damper when taking a fresh air right from the exterior wall? Thanks again for your time on answering this. Ray
Just for my personal education and not sure if this is a stupid question but, Does fire dampers requires to be firestopped? sealed in the annular space? Thank you.
Go watch this video on a fire damper which is a curtain style one. Sorry, I don't check this very often, but am glad if it was helpful. Fire Dampers: th-cam.com/video/RQ1-lXkVD04/w-d-xo.html
Thanks.. its very much beneficial knowledge... I hv some doubt in this... The temperature sensor installed there... Suppose we have installed a MSFD already and now we want a temperature sensor in that.. is it possible to do so .. If u can share ur contact or mail id... Plz do it vl b handy for me
5min of education, then“Lets squish a banana” , then back to education
Finally! A damper than can handle all the rogue bananas that end up in my air stream!
Helpful vid though, thanks!
It Must be centered in the wall. the sticker indicates with dashed lines. Angle must be mechanicaly fastened to the damper on both sides of the finished wall around the perimeter of the opening and one side of the connecting ductwork must be a breakaway connection, usually the unoccupied space.
Thanks man I'm studying for my Reg 4 very helpful info thanks for your time
Thanks for the video it was helpful, but just have a question, " do you know if you require a smoke damper when taking a fresh air right from the exterior wall?
Thanks again for your time on answering this.
Ray
Helpful! Thank you. 😊
Just for my personal education and not sure if this is a stupid question but, Does fire dampers requires to be firestopped? sealed in the annular space? Thank you.
Please make video, what is butterfly, motorized, smoke, fire, splitter, gravity damper. And how to work these. How is in original look.
Go watch this video on a fire damper which is a curtain style one. Sorry, I don't check this very often, but am glad if it was helpful. Fire Dampers: th-cam.com/video/RQ1-lXkVD04/w-d-xo.html
we need more vedios
So fire alarm relay is normally open?
Thanks 🙏
Can I use a fire smoke damper as smoke damper only
Does it matter what way the air is flowing through it , or could it be flipped to the actuator would be on the other side of the wall
No
Thanks.. its very much beneficial knowledge...
I hv some doubt in this... The temperature sensor installed there... Suppose we have installed a MSFD already and now we want a temperature sensor in that.. is it possible to do so ..
If u can share ur contact or mail id... Plz do it vl b handy for me
Do like to share this video please.
Very helpful thanks
Hi