What's the cost of 2 drawer slides? How long will the drill bearings last with transverse forces? Drill speeds are very limited. Stop messing, just go and buy a router.
Be interesting to see how smooth the cut is considering the drill only spins below 2000 rpm, but an actual router spins at around 23,000 rpm or more. Over 10 times faster
Para detalles y uso ocasional esta muy buena la idea, el ahorro en la fresadora es considerable, pero para uso cotidiano es otro tema y ni hablar de ello
Nice jig and innovative thinking but if I have the time to build a jig like that one I also have the time to use a router which will undoubtedly make a much better cut. The drill just doesn't have the rpm's. Good idea though.
Carpenters will probably laugh at you. It would be an incredibly choppy finish and you would wear the router bit and the drill out quicker. Just buy a cheap trim router and you will get far better results for DIY projects. Homemade tools often result in dollar store quality projects at best but if that is your goal then by all means go for it
La idea es ingeniosa si se va a trabajar así poco tiempo. Las fresas pequeñas de router deben girar como a 18,000 rpm, esa velocidad no la alcanza ningún taladro. Lo q va pasar es q la fresa puede quemar la madera, y también perder su filo. Saludos!
@@micho8101959 si se me rompe una fresadora ,no me invento una ,compro otra,Porque vale más mi tiempo inventando y haciendo una fresadora que lo que vale la máquina.Es como coger un destornillador para limpiar las orejas porque me quedé sin bastoncillos.Por poder puedes,pero no es lo suyo.
If you already have a cordless drill, then just buy a cordless router for $150. You spent at least that amount in parts and labor to build this and a router will do a much better job and is 100 times more versatile.
Quizás estoy equivocado, pero veo cosas en este canal que, personalmente, las considero peligrosas, como usar una fresa en el taladro o modificaciones en la amoladora angular, creo que no se debería experimentar con esto, por eso ya están las máquinas especificas para cada accesorio.
Muy buena idea nadie dijo que sería igual que una router. Es solo una solución para los que no tienen los medios para una router. Se agradece y mis felicitaciones y respeto al genio por compartir tan buena idea. El único detalle sería que diera las medidas de los materiales.
Hahaha! Nice video, however I am from India and in our language we say 'Pahad kodhke Chooha nikala', meaning you dig a big mountain to take out a RAT. Great going...
IDEA GENIAL QUE DEBES HACER ANTES DE MORIR, TE VA SERVIR, ES ASÍ --> th-cam.com/video/-RtvnDWyKL0/w-d-xo.html
What's the cost of 2 drawer slides? How long will the drill bearings last with transverse forces? Drill speeds are very limited. Stop messing, just go and buy a router.
Exactly what I thought when watching this. Besides that it can't have the accuracy and longevity of a real router. Not clever at all.
it's clickbait trash but hey got us both with it.
It's faster, more accurate, and less likely to kill you if you just buy a router
He's already missing a finger so I'm sure he's going to kill himself (or someone else dumb enough to try this)!
Be interesting to see how smooth the cut is considering the drill only spins below 2000 rpm, but an actual router spins at around 23,000 rpm or more. Over 10 times faster
Agreed. This is either an exercise in click-bait or idiocy.
The whole thing will probably self destruct under the torque.
@@woodnewf3847And drill aren't designed for side loads either.
These Drill/Saw hacks are nothing but dangerous!
So a really large and underpowered router. Interesting.
Muy ingenioso!!!👏👏👏
Ni los mejores ingenieros te ganan, te van a salir muchos enemigos jajjajaja saludos amigo.
If ya can afford a DeWalt drill, then you can afford a DeWalt trim router.
Missing finger due to router made by hand
Excelente idea! Gracias
Excelente 😮 genial, gracias
Que ingenioso ..👍
EXCELENTE!!!
Si bien no es preciso o profesional, es buena forma para aquellos que empiezan a tener cuirosidsd y ver el funcionamiento, gracias.
Muy Bueno parabéns 🎉
COMO SIEMPRE HACES UN TRABAJO MAGNIFICO ... ESTUPENDO.. FELICITATIONS .. 👍👍👏👏👏 UN BRICOLEUR FRANCAIS DE MARSEILLE
How did the circular base get cut? Wasn't with a ROUTER was it?
genial, como siempre
Have you ever heard of something called a router to go along with the bit? Drills spin MUCH to slow to get a good cut!
Interesting idea
Great job
Hoooo DIOS felicitaciones!!!!
Amazing and beautiful 😍
Gran idea!
buenas tardes maestro, gracias por compartir sus conocimiento bendiciones
Muy interesante
A Great Idea .
Buen trabajo, su idea abrió la puerta de mas ideas, en si mejoró y lo realizaré, se agrádese, 🍀🍀🍀.
Buen bricolage
Muy buena, es más excelente idea.... gracias por tantos aportes
Advanced stuff. Muey bueno
Excelente, parabéns!
Wow just wow
Parabéns amigo, vou fazer uma.
Hay router economicos, no tal caros, mejor un router aunque sea de los no tan caros, va funcionar mejor sin duda 👌
Шикарно!!!
Para mí bueno idea, para uso caseros 👍🏆🇵🇷
Чувак без пальца, сразу видно опытный😂
No sería lo adecuado pero sales del problema!!! A mí me parece gran idea!!!
Muy buena idea. A falta de recursos para comprar un router.
Cool. Muy creativo y una gran habilidad❤👍
Gracias por este video, Dios te bendiga, lo haré antes de morir 😂😂😂Gracias, Gracias, Gracias
واو أتمنى لك يوما سعيدا ❤🎉
Para detalles y uso ocasional esta muy buena la idea, el ahorro en la fresadora es considerable, pero para uso cotidiano es otro tema y ni hablar de ello
Gracias por las ideas amigo dios te bendiga
Prefiero un router de los varatos
Muy bien, sería bueno construirlo para una mesa y que funcione como un routers
Felicidades
Cada vez que hace un video debe pensar todavia me quedan nueve
Las revoluciones de un taladro no afectan el funcionamiento?
What an incredible invention! I think you should name it a “trim router!”
But in all seriousness, good job. Very creative.
Nice jig and innovative thinking but if I have the time to build a jig like that one I also have the time to use a router which will undoubtedly make a much better cut. The drill just doesn't have the rpm's. Good idea though.
Carpenters will probably laugh at you. It would be an incredibly choppy finish and you would wear the router bit and the drill out quicker. Just buy a cheap trim router and you will get far better results for DIY projects. Homemade tools often result in dollar store quality projects at best but if that is your goal then by all means go for it
Хороший аппарат.
La idea es ingeniosa si se va a trabajar así poco tiempo. Las fresas pequeñas de router deben girar como a 18,000 rpm, esa velocidad no la alcanza ningún taladro. Lo q va pasar es q la fresa puede quemar la madera, y también perder su filo. Saludos!
exato. y 18rpm es aun lento lento. hay routers buenos que trabajan a 25000rpm y hasta 32000, como el que tengo yo
Gracias maestro por compartir tan importante herramienta
I'm a carpenter. Definitely no envy here
Para eso están los fresadoras,es como atornillar con el.taladro,se puede ,pero no es lo suyo.A cada herramienta hay que darle el uso adecuado.
Son alternativas, una solución a un problema puntual ......... es un a porte a la abertura de mente.......... más positivos por favor
@@micho8101959 si se me rompe una fresadora ,no me invento una ,compro otra,Porque vale más mi tiempo inventando y haciendo una fresadora que lo que vale la máquina.Es como coger un destornillador para limpiar las orejas porque me quedé sin bastoncillos.Por poder puedes,pero no es lo suyo.
👍👍👍
If you already have a cordless drill, then just buy a cordless router for $150. You spent at least that amount in parts and labor to build this and a router will do a much better job and is 100 times more versatile.
Algo muy básico ,las ruteadores trabajan a más de 20,000 revoluciones x minuto ese taladro tendrá la tercera parte ,no me parece buena idea saludos
Yea, but carpenters will envy you 😂😂😂😂
Só faltou colocar as medidas usadas pra fazer?
I would honestly just buy a router
El día ke salga la broca volando lo siento x el pobre wey el taladro no es apto para esa broca
No lo creo... la mordaza es muy bueno
Awesome, sangat cerdas, terimakasih sudah berbagi
Buena idea pero el amigo no es precavido
Quizás estoy equivocado, pero veo cosas en este canal que, personalmente, las considero peligrosas, como usar una fresa en el taladro o modificaciones en la amoladora angular, creo que no se debería experimentar con esto, por eso ya están las máquinas especificas para cada accesorio.
Muy buena idea nadie dijo que sería igual que una router. Es solo una solución para los que no tienen los medios para una router. Se agradece y mis felicitaciones y respeto al genio por compartir tan buena idea. El único detalle sería que diera las medidas de los materiales.
Diría que la pérdida de tiempo y dinero
That tool has no use stop bootlicking bullshit did u see how rough that was waste of time and money
Eso no vale. Vas a estropear el atornillador por qué no está preparado para soportar la resistencia continuada de fresar.
deja tu eso. las cuchillas no harán un buen trabajo porque un taladro se queda muy atrás de las rpm a las que trabaja un router para madera
Acortará la vida del taladro .tiene muy pocas revoluciones para ese tipo de trabajo
Yi
Muy creativo 👍😊
Pretty sure any carpenter has a real router.
👋👋👋👋👋
Can you make electric planer with wooden base and drill machine
Los taladros no están diseñados para eso. La vida útil de ellos se bajarán significativamente, creería que es más eficiente con un motortool
He must be really good what happened to his finger 🤔 😮😊😂
un simple enrutador manual se vende en ferretería por un precio muy bajo. ¿Por qué complicas demasiado las cosas?
Está ingenioso pero..... UN TALADRO ES PARA BROCAS NO PARA FRESAS 😉
Y yo que ya está a punto de comprar un router, 😂😂😂😂 exelente trabajo
Karen died in 1983, so I doubt the carpenters are envious about any of this
0:51 perate!!! ¿como cortaste la rueda? esta muy derechita
Just buy a router......then you can build a compound mitre saw and power that with your spare drill
An excellent way to ruin the bearings
You can install the router under the table, It will be more used
Bearings in drills are not designed for radial thrust????
Hi Ok
Hahaha!
Nice video, however I am from India and in our language we say 'Pahad kodhke Chooha nikala', meaning you dig a big mountain to take out a RAT.
Great going...
❤❤❤❤❤
Ha, I’m sticking with a router.
Carbide router bits are designed to run at at least 15000 rpm. You are cutting the life in half of these bits running them so slow.
For what he invested in material and labor you could have bought a router for half the cost
Comprati un pantografo
And this week I will be losing my second third and forth fingers cause I can’t be arsed to buy a trimming router either.
I bet no one was envious of this
Wouldn’t it be easier to buy a router?
A lot of effort to still blow out the corner
In case you want to know the fastest way to trash your drill's bearings.
Just buy a good router
Es algo para salir del paso, para una emergencia en un lugar apartado de pocas ofertas de herramientas
Muy ingenioso!!! Felicidades
uh, they have this new thing called a . . . oh never mind. . .
I'm not sure you know how to use that drill properly. did something like this cause that digit dilemma?
The router spins faster and needs more torque than a drill , but its a nice press .💀💀💀😎😎😎😈😈😉😉
Un capo