ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- Lenovo Ideacentre A340 24IWL F0E800U2ID | Upgrade Options
Detail Specification :
psref.lenovo.c...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Track: Clarx & Moe Aly - Healing [NCS Release]
Music provided by NoCopyrightSounds.
Watch:
Free Download / Stream: ncs.io/Healing
Track: Elektronomia & RUD - Rollercoaster [NCS10 Release]
Music provided by NoCopyrightSounds.
Watch: • Elektronomia & RUD - R...
Free Download / Stream: ncs.io/Rollerc...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Other than FULLY turning the bottom screw, which does nothing but either hug or push the cover away from the body, here are some instructions I hope you find helpful.
Location of attachment points:
BOTTOM:
Measuring 1 centimeter from the bottom corner along the bottom edge on each side, you will find one plastic hook attached to the back case clipping onto the internal plastic frame. A very thin flat blade screwdriver should release it. Otherwise no other hooks or snags along the bottom.
SIDES:
This is where the real fun begins.
Strangely the back cover has inset attachment points, instead of between the case edge and the screen.
4 U-hook anchor points located at:
1). Horizontally: 1.8cm in from the outside edge, Vertically: 7.8cm up from the bottom outside edge
2). Horizontally: 1.8cm in from the outside edge, Vertically: 14.4cm up from the bottom outside edge
3). Horizontally: 1.8cm in from the outside edge, Vertically: 19.5cm up from the bottom outside edge
4). Horizontally: 1.8cm in from the outside edge, Vertically: 28.8cm up from the bottom outside edge
These are the MOST difficult to disengage. Simply running a guitar pick or screwdriver or slidey bar between the edge and screen doesn’t work. In the past, I’ve been too gentle on the edges and like a surgeon separated the screen glass from the screen digitizer ruining the entire PC. My suggestion is to stick a screwdriver or a block of something inside the stand hole, between the cover and the body to keep up the pressure on the back case as you go along. Since there is nothing to release along the visual edges, you have to pull the bottom, slide along the side, relax, pull, slide, relax, technique along the bottom and edges until something eventually gives. Hopefully, it won’t be your patience. Fingernails are sometimes the best weapon.
TOP:
There are 8 cover plastic nibs spaced evenly along the top edge, 4 to the left and right of the camera slide switch. You might try inserting a very thin guitar pick along that edge. I didn’t because I was too afraid of killing another PC again. Getting the plastic cover away may be tricky. There are no delicate cables to worry about. You might get a string of rubber coming out from between the side edges but you can lightly glue them back, I used a slight brush of Elmers rubber glue.
This is the worst case I’ve ever seen for repairs. The attachment points are way too hard and certainly not made to easily open. I would never suggest this PC because the next repair guy might have to buy you a new one out of his own pocket.
Good luck friend, you're going to need it. 😄😉
Hello. Do you think I can install 16gb ddr4 3200 RAM? well you suggested a 16gb but ddr4 2666...! Thanks for your comment
Yes you can install 3200,. But still running at 2666. Because proc only can run speed ram 2666
@@arafahqwerty6170 eso no malogra la placa madre ?
I have the same device and I want to upgrade it to 16. Can I or do I have to change some things? Will it raise the temperature?
i have the same AIO pc for 3 years it was slow at start and crashed alot when i was in meetings so i added an ssd by replacing the cd side and it got a little faster and crashing stopped a little, so i wanted to ask if i can upgrade any part of this such as RAM, processor, graphics card
what i currently have: 8gb ram, i3 processor , intel UHD graphics card , 1 HDD, 1SSD
what i want to upgrade: 8 to 12 or 16GB RAM if possible, i5 or i7, any graphics card better than this.
please help me
hi! would like to know if you were able to upgrade your processor to either i5 or i7? thank you!
SSD upgrade Possible in Lenovo Ideacentre A340 24IWL ???? Should we remove HDD & Fix SSD ??? or We can add SSD in it. Kindly confirm...
this type can add another SATA 2,5" storage
What is the purpose screw on bottom of the pc??
to leverage the lock between frontcase and backcase, so there's enough gap to pry it open
Display ka price kya honga
bung, ketika saya membuka game di komputer, itu membuat banyak suara, apa yang harus saya lakukan?
Can I upgrade a graphics card (AMD Radeon R5 M430 - 2048 MB) from my laptop to this?
no
i have worked on a few of these models now and ive had nothing but trouble getting the casing on reasembling. i always end up with a small gap top LHS of screen and the screen doesnt seem to pop back in on both sides. scared of cracking the bloody screen. any tips?
as you can see, i have trouble too at minute 5:30,,
lay the unit down and then check the gap a couple of time 😄,,
I broke my screen while trying to get it back on and I was extra careful. Awful design of the housing imo.
Me ajudou muito!! obrigado
I have this device new brand but it’s very slowly is that normal?
slow open a lot of application? upgrade ram min to 8Gb , 16GB Better
can the cpu be upgraded ?
Not, is pga package
Presionar el centro de la laptop
thank you!
you're welcome
Can upgrade vga?
no,
棒！
🎶🎶🎶🎶🎶🎶 👍
Music to loud
thank you for the input, i will fix it in the next video