My current PC is mini ITX. While I love the size, the lack of space and expandability is annoying. My next case will be micro ATX or ATX I think. Nice build though!
Absolutely loved your video. I've learnt a lot from your video. I am keen to build a small factor gaming tower and this video is a golden reference to building one. And moreover, I want to build a AMD build and again this was the golden route to knowing how to build a good build. Making sure the parts are compatible to each other.
@@gokublack8342 It seems that he's doing a "Negative" pressure config as all fans are exhaust. But the thing that worries me more is the tempered glass side panel, GPU has poor airflow.
i’ld do the cpu block towards the end to avoid having working around the aio tubes when cable managing the case, and run the 24 pin as well as the cpu 8pin behind the psu to the bottom, easier to hide them and you wont end up with so much cables at the front. perhaps mount the fanhub at the front of the case below the case IO to make it look abit cleaner
Because of the blockchainers, we'll all have to wait several years before high-end computer hardware will become readily available at, or close to, the MSRP.
I have this case and When he tries to put the top on with an SFX-L PSU with the fans attached, you can't... It's in the manual. Also WTF that IAO placement, are you trying to kill the pump in less then a year?
a $350 cpu and a $230 motherboard --- LOL a $254 power supply and a $830 gpu --- OMG liquid cooling in that tiny case --- ha ha ha that is the worst build since the verge so ridiculously overpriced
There is so much wrong with your comment. While yes those prices are inflated but so are everything at the moment. The AIO placement is a bit of a error but this case doesn't give you much options with the TG side panel. To even think this is close to as bad as the Verge's build is laughable.
Not a mistake that's the only way to put in a 240mm aio on that case because of clearance with the psu and ram. Couldn't use an air cooler because that gpu had to be mounted vertically. Orientation of AIO really doesn't matter it will just lessen the life span of the pump and maybe make some noise it's not a big deal
@@ethans669 That's a pretty big deal dude. Not one to be particular about AIO placement, however, that config is a death sentence. Even if Corsair offers to replace it, you'll still be down until you get the replacement. I'm almost certain there are low profile air coolers that would work will this case. I could be wrong though.
Mounting a pump like this will guarantee it's death in likely less than a year. Bottom rad is only for custom loops, in this case you should mount the AIO on the side panel.
Is there no chance at all they've worked enough air out of the system to be OK using it like that? Personally, I'm going to stick with air-cooling until my trucking career is done. There's just WAY too much bouncing around on these roads.
ive seen a few builds in this case now and alot are putting the aio on the bottom isnt that just bad ? the cooler master masterbox NR200p max comes with a aio at the top and a 850sff psu thats due for release in aus soon ( not sure on other regions ) seems like a better set up not sure why these vids are advising people to put the aio in a bad place to burn out faster !!
Great video man thanks! I am about to build my first PC and I did have small question. The gpu riser cable comes with the gpu or do I need to buy that separate?
That is NOT tiny. That case is huge! Can you show building one in the TINY (M09 Mini Desktop Case Mini-ITX PC Chassis Versatile and Efficient Industrial Control Case with Foot Stand 180W Power M09 HTPC Case Industrial Control Mini ITX Computer Case with USB2.0 Foot Stand and) case please?
good video, my only comment the pump should not be the highest component of the water loop, Gamer nexus make a good video of why the configuration used in this video is bad, and jay two cents make it even more simple explanation after that.
Tweezers... Nice. Thing is... Now that TH-cam has removed the like/dislike bar on android this tutorial would be on par with the Verge's if I didn't know better...
I love that case, works perfectly with almost any GPU size and keeps really good temps. Gorgeous build!
Even 4090 ti?
Long PC build videos are good for my mental health... They're just therapeutic to me. Great vid, keep up the good work 💯🤙🏿
I like powerful small form factor PC's, easy for me to transport around.
My current PC is mini ITX. While I love the size, the lack of space and expandability is annoying. My next case will be micro ATX or ATX I think.
Nice build though!
AIO pump is gonna die super fast in that orientation. Plus that left RAM stick didnt look completely seated. 12:12
This is the comment I was looking for. Pump is the highest point.
Step 0: Wait till heat death of the universe or get fleeced by scalpers for a GPU.
what a time covid was, lol
Absolutely loved your video. I've learnt a lot from your video. I am keen to build a small factor gaming tower and this video is a golden reference to building one. And moreover, I want to build a AMD build and again this was the golden route to knowing how to build a good build. Making sure the parts are compatible to each other.
Nice video. One thing bogled me, that the pump is above the radiator. Doesn't that shorten the AIO's lifespan?
Also if he's gonna do bottom aio shouldn't the fans be intakes instead of exhaust?
@@gokublack8342 It seems that he's doing a "Negative" pressure config as all fans are exhaust. But the thing that worries me more is the tempered glass side panel, GPU has poor airflow.
@@ACCOZONE316 Yeah I have this case and definitely wouldnt use glass panel
Man I can't wait to use this video next year when I can buy a gpu.
lmao
Come on it’ll be at least 4 years!
We’ll probably have to wait until something like a RTX 9080 comes out lol
Well you can buy one but you sure are gonna pay
I can confirm I still can't find one as of 2022
Might be mITX but it's hardly tiny IMO. Whilst it's way smaller than the Lian Li Nano it's on the larger side for mITX cases.
Nice peeling off scene. I like all of your detailed assembly. Thanks. Thumps up
i’ld do the cpu block towards the end to avoid having working around the aio tubes when cable managing the case, and run the 24 pin as well as the cpu 8pin behind the psu to the bottom, easier to hide them and you wont end up with so much cables at the front. perhaps mount the fanhub at the front of the case below the case IO to make it look abit cleaner
This is really helpful! I'm planning to switch to an ITX form factor when I'll upgrade my pc becaise this just looks so clean
Are people not noticing this guy has just mounted 3 fans facing directly into the tempered glass.... Like... Wtf??
I'm keeping this so I can assist my great-nephews future builds
Really appreciate this build guide
Peel as I say, not as I do. (LOL) Seriously, excellent build video, keep'em coming.
Great build, and info easy to learn from this video thanks
Because of the blockchainers, we'll all have to wait several years before high-end computer hardware will become readily available at, or close to, the MSRP.
There was a panel for the audio?!?! I wish I knew that 🤣🤣
next year im gonna get one of these.
Good luck building it!
Should AIO- radiator instal to top of the case? Higher than pump to avoid the air bubles in pump.) ???
Shouldn’t mount AIO at bottom
the gpu is hanging with few screws that hurts. A stand for gpu should be used.
wait am i blind or did no thermal paste get used on the CPU?
Did u buy those black cable or did they come with it
What is the name of that anti-static mat ?
I'm wondering as well
I have this case and When he tries to put the top on with an SFX-L PSU with the fans attached, you can't... It's in the manual. Also WTF that IAO placement, are you trying to kill the pump in less then a year?
He didnt Buy it
How much does that cost all together?
the psu not spinning and the aio killing the processor and the window making the computer hot like a microwave
33:26 yes u forgot thermal paste
AIO - they (Gamer Nexus) said that at the bottom is not good for water flow
how much does it weigh?
where does the GPU riser cable come from?
Come with the case.
I just build my pc toCooler Master nr200p case....IT was pretty tight fitting 🤣🤣
That's what she said.
Why are the rad fans blowing downwards.. should be blowing inside the case as heat rises...
No tweezers?
just saying if ppl learn about all that available you can make pretty much the same PC for a lot less money and who has money at this time.
You forgot to apply thermal paste...
Yeah, right?
that case has horrifying cable management.. I don't have that kind of patience. ,😭
why is the GPU crooked my brain is driving me mad :D
Funny moment at 31:42. 😆
I love the tweezers joke
thermal paste HELLOOO
What can this PC run? Like could it run battle field five at like 30 fps?
No it can run Fortnite at unlimited and high FPS
👍
Dude, you put the AIO at the bottom. Big no no.
Who else is reading through the comments looking for someone crying about the AIO placement😂
Still too big of a case
Oh you make the verge joke haha and you do a verge wtf is wrong with you?
am i the only one annoyed by the slanted graphics card
It's still kind of bulky doesn't anyone think?
a $350 cpu and a $230 motherboard --- LOL
a $254 power supply and a $830 gpu --- OMG
liquid cooling in that tiny case --- ha ha ha
that is the worst build since the verge
so ridiculously overpriced
There is so much wrong with your comment. While yes those prices are inflated but so are everything at the moment. The AIO placement is a bit of a error but this case doesn't give you much options with the TG side panel. To even think this is close to as bad as the Verge's build is laughable.
Not to mention AIO pump burn out coming soon
Surprised someone like newegg could make such a big mistake like the AIO placement.
Not a mistake that's the only way to put in a 240mm aio on that case because of clearance with the psu and ram. Couldn't use an air cooler because that gpu had to be mounted vertically.
Orientation of AIO really doesn't matter it will just lessen the life span of the pump and maybe make some noise it's not a big deal
@@ethans669 the fact that it lessens the lifespan is what most people would find wrong with that orientation
@@ethans669 That's a pretty big deal dude. Not one to be particular about AIO placement, however, that config is a death sentence. Even if Corsair offers to replace it, you'll still be down until you get the replacement. I'm almost certain there are low profile air coolers that would work will this case. I could be wrong though.
4:14 quick jab at the Verge hahahaha
Verge dude still getting flamed
Mounting a pump like this will guarantee it's death in likely less than a year. Bottom rad is only for custom loops, in this case you should mount the AIO on the side panel.
Great video. This is insane to see built. Thanks for confirming I don't want a small case, lol.
Thermal paste?
That's exactly what I've been wondering about.
Step 0: get a GPU to build your PC around; hopefully not at daylight robbery rates...
11:00 ah yes these sized screws.
Super helpful vid btw thanks
that AIO orientation is killing me
pump burn out in months. Corsairs plan for future sales lol
Is there no chance at all they've worked enough air out of the system to be OK using it like that? Personally, I'm going to stick with air-cooling until my trucking career is done. There's just WAY too much bouncing around on these roads.
ive seen a few builds in this case now and alot are putting the aio on the bottom isnt that just bad ?
the cooler master masterbox NR200p max comes with a aio at the top and a 850sff psu thats due for release in aus soon ( not sure on other regions ) seems like a better set up
not sure why these vids are advising people to put the aio in a bad place to burn out faster !!
@@volvot6rdesignawd702 I'm hyped for the NR200P max! I've been interested ever since I saw Optimum's video on it.
@@volvot6rdesignawd702 oh so wait is the problem putting the AIO at the bottom not the top
Ladies and gentleman the new the verge pc tutorial video.
I lost when he said you need a table. The thermal paste spreader sealed the deal for me.
Great video man thanks! I am about to build my first PC and I did have small question. The gpu riser cable comes with the gpu or do I need to buy that separate?
if you buy that case - the nr200p it comes with that.
I wonder why nobody mentioned that you didn't use Thermal Paste.
steve from gamers nexus crying rn
AIO block came with it on there. when he flips it on the CPU side that grey square you see is preapplied paste
Installing an AIO that way, is a death sentence for the AIO.
It hurt to watch...
The pump shouldn't be at a higher position than the rad... But again, was there any other option for the rad placement except at the bottom?
Thanks. I’m building my own and it’s my first time. And I don’t know where everything goes 😂
That is NOT tiny. That case is huge! Can you show building one in the TINY (M09 Mini Desktop Case Mini-ITX PC Chassis Versatile and Efficient Industrial Control Case with Foot Stand 180W Power M09 HTPC Case Industrial Control Mini ITX Computer Case with USB2.0 Foot Stand and) case please?
i love how he prevents sag.. and its sagging sooooo hard :D cool build tho! def building a mini next time!
I'm looking at building a mini atx itx pc for day trading, sort of like a laptop replacement. 12+ cores, 8gb video, ssd/nvme/
31:37
For Quality Peeling Technique.
Just a little thing why is the aio cooler radiator at the Bottom great video otherwise
I have the x570I from asus and my HD Audio connector doesnt want to go in, any suggestions?
that was DENSE
Can an Asus Dual Fan RX 6500XT fit on this motherboard? I have that GPU wich I adore but I want to change from mATX to mITX.
Beautiful build! Really awesome machine in such a small form factor
good video, my only comment the pump should not be the highest component of the water loop, Gamer nexus make a good video of why the configuration used in this video is bad, and jay two cents make it even more simple explanation after that.
AIO at the bottom definitely a no no. Dense build.
Do not follow this - Air will end up in the CPU AIO block.
Do the wires come with the case
That doesn't look very mini to me
You deserve a like for that peel sir
I was so comfortable and satisfied until the side panel got popped off while it was getting peeled
Umm I see you didn’t use the paste
how heavy is that in total? (KG)
uATX = Micro ATX
@19:07 this way up ⬇️
Tweezers... Nice. Thing is... Now that TH-cam has removed the like/dislike bar on android this tutorial would be on par with the Verge's if I didn't know better...
4:14 hahaha lol!
i dont know why companies are still using non integrated motherboard braces like the integrated ones are just better
Nice vid, but why did you forget to show putting "Thermal Paste" on the CPU?
its already installed on the AIO
Hey newegg figure out how to keep bots from buying all the c
GUYS yet? Wish I could buy at least a 3060 from ya.
Excellent Video. Thank you. I missed the use of Thermal paste.
I got the exact case and this will be my first ITX PC build. Decided it will be my first custom loop too.
how the hell did u find a graphics card?
@@mrt4755 patience
Bruh it’s not the time for this. How are we suppose to build PCs without GPUs huh?
Non-rgb will be best solution mitx system so many cable in this
STEP 1: somehow get a gpu
where you can buy that mat that you have under the mount
A guy built mine. Same case but he did the inverted case mod. Got the rad at the top for better cooling.
this dude has cool high school teacher energy