Lee Six Pack Pro - Inline Fabrication Ergo Roller Lever-Handle 02/11/2023
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Hello and welcome back for today's video. In this video I show you the New Inline Fabrication Ergonomic Roller Lever - Handle for the Lee Six Pack Pro 6000. I show the complete installation of the lever and handle to the press. This is an Awesome upgrade for me ! These levers are manufactured to eliminate the uncomfortable bending over action you must perform to get the ram all the way up, they tuck you in closer to the press for an excellent view of the shellplate workspace are equipped with an extremely comfortable roller handle. Now let's Watch and Enjoy !!!
inlinefabrication.com/products/ergonomic-roller-lever-for-the-lee-six-pack-pro-6000
Do you have to bend over with this new handle?
@hongmlamg my press is mounted 38 inches off the floor, and I don't have to bend over to operate the full cycle of the press handle. Depending on your bench height and where you have your press mounted and depending on how tall you are could lead to variance. Just FYI, when I reload I'm sitting on my adjustable saddle chair. Thanks for stopping by and watching, Brother 😉👊🇺🇸 ... I'm 6ft tall
I just ordered one for my Lee six pack pro,Thanks this is great stuff
You're going to be so happy when you get it😉 ... thanks for stopping by and watching & posting your comment, Brother 👊👍🇺🇸
Looks good 👍
Thanks Don 👊 I really appreciate the support 😉👍🇺🇸
👍👍
Thanks for watching Brother 👊 🇺🇸
I would assume it is much better than the knob
The comfort level for me personally is night and day. I was shocked with the overall comfort 😉 ... thanks for stopping by and watching Brother 👊 🇺🇸
Where did you get the bin rails that are connected edge of your bench?
@keithwood638 I got them from Amazon, I had to customize them to screw into the bench. Wall Control Pegboard 14in Accessory Hanger Tool Holder Bracket Pegboard Accessory for Wall Control Pegboard and Slotted Tool Board - Red a.co/d/ctgNHXn ... if you get them, you will have to bend the tabs out. I used my vise to bend the tabs it was very simple to do😉👍
Thank you JerrBear. Great info. I just received bt brabh new 6 pack pro press kit
@@keithwood638 Awesome Brother 😉👍 thanks for stopping by and Happy Reloading 😁👊🇺🇸
Good video. I see that the lower linkage of the press hits your bench. Have you alleviated that yet?
If you watch the video again, it's not the linkage that's touching the bench. It's the spent primer tube. The linkage itself has 1 inch of clearance from the bench. Thanks for stopping by and watching Brother 👊 🇺🇸
I was hesitant to spend 50 bucks on a handle, but the Inline Fabrication Ergo Roller Lever is worth every penny. It speeds things up and makes every pull of the handle feel more solid. I would consider it equally as much a "Must-Have" Upgrade as a Grimnir Universal Case Dropper.
I totally agree with you 😉, thanks for stopping by and posting your comment, Brother 👊🇺🇸
Loving that setup. InLine Fab is always a great base.
I'm always impressed with their product 😉 ... thanks for stopping by and watching Brother 👊 🇺🇸
That’s a nice addition. I know that will make using the press easier for you. 🤛🏻🔫🇺🇸
I didn't really believe that it would make as big a difference as it did. Wow ... it's a night and day difference in comfort. I would recommend this to everybody who has this press 😉 Thanks Walter for stopping by and watching 👊 🇺🇸
Roller handles are the way to go. I put one on my Lee classic turret press and just put one on my Lee APP press.
Yes, I totally agree with you. Looks like I'll be getting a couple more 🤪 ... thanks for stopping by and watching Brother 👊 🇺🇸
Sure didn't take you long to get it.
Dope, once I knew they were in stock 2 days from Oregon to Michigan 😉 ... thanks for stopping by and watching Brother 👊 🇺🇸
Awesome ! Very Nice Upgrade ! 👍
Good morning, Brother🤗 I hope you have a blessed Sunday 😇 ... thanks again for stopping by and watching 👊 🇺🇸
🤘🏼👍🏼💪🏼🤟🏽
Good afternoon CW👊👍🇺🇸
Sweet set up, Jerr!
Thanks Brother 👊 I appreciate you stopping by and watching 😉👍🇺🇸
I ordered the non-ergo version of this, and when installed on the Lee six pack pro, it knicks the case slider with each pass. I made several adjustments, and nothing helped. I've emailed Dan @ Inline, but there has been no response yet.
That is very odd🤔 ... I'm at a loss to what would be the problem. Have you tried tightening up the press linkage. That is what I did with my press. That really sucks that it's not working 😫
So I just came down to my reloading room to look at my press I'm going to bet they sent you the wrong handle. I have every bit of a 1/2 inch clearance from where the case slider ends and between the lever handle. Go to the about page of my TH-cam channel find my email and send me a picture of the problem you're having.
@@JerrBearTactical I sent you an email & photos, thank you
@@joeyates1428 I sent you an email with how to fix it🤞
@JerrBear Tactical thank you for the help, I'm proper now!!