I'd say go for the build. This would benefit so many people including me because alot of people get rid of the RB20E and it has so much hidden potential that's not explored fully.
I had a na 20e out of a a31 in my old C35 laurel missile ran it on 98 or 100 octane and it would get 3rd and 4th gear on a wet pad was always getting asked if it was 30e with how well it ran the 20e is the highest compression engine of the RB family so they love the higher octane
Single cams are known to spool better. Also old single cam 2 valve engines are typically low VE engines, they like smaller turbine &housing. Other tips- the valve springs will probably be your first restrictions. If the bottom end is keep power low till higher rpms.(keep timing very conservative until past peak torque then ramp the timing in) this is how stock 2jz hold 1000hp. They keep torque down@lower rpm with low timing and low.boost. Yes! Link ecu it. You are correct on the harness and distributor wheel. We use same cas wheel on the z31.
Stop it sam 🤣 your giving me way to many ideas for my RB20E 😋🤘 I'm so loving the Bogan mobile so keep going it sounds so nice, definitely a unique sounding engine 👌💕💯
You have to dive into the rabbit hole. It will eat at you if you didn't. Even if the results aren't what you were expecting, at least you satisfied your curiosity and provided everyone else information that can be built upon. Sounds like nothing but wins all around.
that sound is amazing awesome vid bro, I got the "all I want for christmas is car parts" sweater and the quality is off the charts, awesome work with those too, keep up the awesome work.
Holy Crap! So crazy to see my Axial project (20:14) that I worked shown in a video in Japan on one of my favorite TH-cam Channels LOL. I work for Axial and created that SCX10 III and many others that they showed you. Super cool!
The Bogan 32 series is awesome. I can't wait to see what happens with the build and when SAMMIT gets it to the track. I hope he has or will get a couple more of those engines to replace the one in the car when it goes kaboom !!!! Gaya Factory is very dangerous for the bank account. I also hope SAMMIT does more content with them in the future.
Awesome video as always Sammit. I've been rewatching your videos from the very start of your Channel. To get ready for coming to Japan. Thanks for all your hard work.
What really shows in the sim, is the alignment of the car. Sam's chaser and S15 have a lot more caster (self steer), whereas here you can see he has to "work" the wheel a lot more to keep it in slide. Maybe thats intentional, really using the sim as a workout to train yourself, muscles and stamina.
Yes to everything you said about building the engine in it. That idea sounds sick!! That would also be really fun to watch, you building it into an Ebisu missile.
Yes, u can, I have an RB20E and I am and auto electrician, I was thinking of using a RB25 NEO harness & ECU on it, just have to use the Neo 25 injectors and rail will just have to modify the bolt up & run coilpacks on the plugs or if the plugs are to far down i’ll mount the coils and use the plug wires.
Konichiwa Aussie bro ☕️ Great content, keepitupSam, luv the snow, and best wishes to May. Bogan style is so cringy. Great sim practice Sam and good sledging May , sugoi 😉 Peace 🤘✌️🇦🇺
IF you get a speeduino ECU work on that you have a super budget build. you can get a ECU to work for 150$ you might get lower if you go in for it. btw a lot of the "low cost" ECU's is based on speeduino.
Yo, Gaya Factory looks legit, they're rocking Simucube and Moza racing wheel bases. Lots of good wicked setup going on there! I'm also into sim drifting as well
Sam the mad scientist !.In all seriousness doing stuff like this is how the tech we know was first developed .Thomas Edisen said "invention starts with a pile of junk ".
Fold the return fuel line a bit where it comes out of fuel rail and cable tie it so it’s folded with build a bit more fuel pressure making it run a bit richer it’s a little something we’ve learnt after playing with rbs for years haha
Sammit i have a 1994 toytota corolla hatchback and im interested in doing an engine swap if you're gonna get rid of the rb20e then lmk only thing is i live in new zealand
the rb20 is like the rb30 so alot of rb30 info will work with it and alot of parts also and they do breath well. hit up the aussies and kiwi's for info. i had a rb30 single in a aussie skyline just head work and a cam,cometic head gasket, stock bottom end and a to4z rb20 det injectors and a haltec ecu and was doing 300 hp atw @12 psi. heaps of torque and full boost by 2000rpm.
I think it's the na compression ratio that gets u good response. Yeah go all out with the $$$.. na to turbo conversions give u that unique ride so it's worth it.
Hey Sam, long time follower, just wondering I'm thinking of visiting Japan this year and want to know if September is a good time? Is that the rainy season? Cheers
I think this motor isn't so popular that's why people haven't find a way to make them reliable . The best example is the rotary ... In the recent years there is so many breakthrough that make them reliable .
let's swap RB20 single jingle in all the no-engine shells laying around with a MT trans!! actually, all the Laurel available for sale now are automatic trans..... whatever, I'd probably start drifting with automatic first.... wow those simlators are insane in the mainframe!!! I love the street racing one! they even replicated the jump at the exit of the PA that was on the news for being dangerous!! WOW!
It’s so strange to me hearing people being surprised by the RB20, my mate has an RB20DET in his R31 Skyline and it has about 400hp, they’re just a super responsive RB and they get down, he’s running his with a haltech also, there’s so much potential out of RB20’s and I can’t believe more people aren’t into them. This is is Australia by the way.
i think you should do it right, single cams and smaller displacement rev faster. im from puerto rico we never got that engine so the first time i hear about this engine was in this channel so it’s interesting to see and hear it, it sounds badass
Lengthen out the MAF a bit its too close to the intake of the turbo that is why it shuts off when it comes down to idle, the big turbo is still sucking air at zero TPS and it dumps excessive fuel in the cylinder and floods it.
I think you should polish that silver paint right up and drop it to the floor rock hard suspension, some wicked 90s alloys and use it as a family saloon, boosted to the max 😂
Yeh do it ! And save that silver paint, its slick.... And that intake pipe nearly two metres long could mean it has more boost than you think right now! Did you look at gearboxes that fit it yet!?
I'd say go for the build. This would benefit so many people including me because alot of people get rid of the RB20E and it has so much hidden potential that's not explored fully.
I think it would be super interesting building the R32 single jingle and see what it can handle.
I think it would be super interesting building the R32 single jingle and see what it can handle..
I second this!
My mate has his RB20DET in his 31, it’s running off a Haltech and is at about 400-450hp
@@loosygoosyy lmao 💀
I had a na 20e out of a a31 in my old C35 laurel missile ran it on 98 or 100 octane and it would get 3rd and 4th gear on a wet pad was always getting asked if it was 30e with how well it ran the 20e is the highest compression engine of the RB family so they love the higher octane
Hearing the single jingle scream really peaks my interest as well. I believe you have the means to make it happen. Thank you Sam!!
All Sam needs now is tractor flap for it lol 😀
Yeah definitely put a clapper on it 😁👍🏻
Single cams are known to spool better. Also old single cam 2 valve engines are typically low VE engines, they like smaller turbine &housing.
Other tips- the valve springs will probably be your first restrictions.
If the bottom end is keep power low till higher rpms.(keep timing very conservative until past peak torque then ramp the timing in) this is how stock 2jz hold 1000hp. They keep torque down@lower rpm with low timing and low.boost.
Yes! Link ecu it.
You are correct on the harness and distributor wheel. We use same cas wheel on the z31.
Batter up!, Great job on the custom turbo kit. This is one of my favorite videos you have done. Glad to see you having fun🔥
I've been watching GAYA FACTORY for a long time. It's nice to see some of my other favorite TH-camrs work with them!
Definitely worth looking into what this engine can take!
Also make sure to include all the SIM stuff in the vlogs, super into sim rigs!
That's so HILARIOUS I ALSO wasn't even looking AT AFR'S I was too busy checking the boost gauge
Stop it sam 🤣 your giving me way to many ideas for my RB20E 😋🤘 I'm so loving the Bogan mobile so keep going it sounds so nice, definitely a unique sounding engine 👌💕💯
You have to dive into the rabbit hole. It will eat at you if you didn't. Even if the results aren't what you were expecting, at least you satisfied your curiosity and provided everyone else information that can be built upon. Sounds like nothing but wins all around.
that sound is amazing awesome vid bro, I got the "all I want for christmas is car parts" sweater and the quality is off the charts, awesome work with those too, keep up the awesome work.
Mayor Frankenstein vibes “ it’s alive” 😂
GAYA FACTORY is siiicckkk! so cool that they have so many sims
I love to see Sam ruminating over the RB20. IT certainly looks like a very promising project and more VR/simulator practise would be awesome
Holy Crap! So crazy to see my Axial project (20:14) that I worked shown in a video in Japan on one of my favorite TH-cam Channels LOL. I work for Axial and created that SCX10 III and many others that they showed you. Super cool!
This is why i love your stuff Sam, some of these experimental madness moments feel like the kind of sh*t i'd do
The Bogan 32 series is awesome. I can't wait to see what happens with the build and when SAMMIT gets it to the track. I hope he has or will get a couple more of those engines to replace the one in the car when it goes kaboom !!!! Gaya Factory is very dangerous for the bank account. I also hope SAMMIT does more content with them in the future.
Loving this series Sam, keep it 'up. Fascinated to see what this makes with a Link, proper intercooler etc
Awesome video as always Sammit. I've been rewatching your videos from the very start of your Channel. To get ready for coming to Japan. Thanks for all your hard work.
What really shows in the sim, is the alignment of the car.
Sam's chaser and S15 have a lot more caster (self steer), whereas here you can see he has to "work" the wheel a lot more to keep it in slide. Maybe thats intentional, really using the sim as a workout to train yourself, muscles and stamina.
you can use the distributor to read engine timing in order to fire the coils/injectors with a standalone. We do something like this on KA24DE's.
Yessss a sammit video dude this car really wants to live every thing works on him and there is no rusy
Haven’t even got to the end but bro it sounds so good!! This is wicked
Yes to everything you said about building the engine in it. That idea sounds sick!! That would also be really fun to watch, you building it into an Ebisu missile.
ayyyyy snow!!!!! Looks like home, heres been snowing past 2 days shit tons of snow!! Good weather to drift around 😂 Cheers from Finland!
I want all of the Bogan Build!!! Loving these videos!
Yes, u can, I have an RB20E and I am and auto electrician, I was thinking of using a RB25 NEO harness & ECU on it, just have to use the Neo 25 injectors and rail will just have to modify the bolt up & run coilpacks on the plugs or if the plugs are to far down i’ll mount the coils and use the plug wires.
it's fun when ppl talk about a "snow day" here i tis the "snow season" ;) like month and month. if you have a car with winter tires on your fine.
Flash back to when may said “it’s soo quite, I didn’t know a skyline could be that quite” 😂😂
Sammit, RB20E block = RB20DET block!!!!! Same size pistons same size conrods! You can use rb20det injectors and rb25 turbo on!
ABSOLUTELY GO FOR IT!!!
definietly go all out with the R32 build!
im interested in the 32 build as well but a dyno run on the bogan set up would be interesting to say the least
Konichiwa Aussie bro ☕️ Great content, keepitupSam, luv the snow, and best wishes to May. Bogan style is so cringy. Great sim practice Sam and good sledging May , sugoi 😉 Peace 🤘✌️🇦🇺
Let the single jingle sing💥💥🔥🔥🔥
DO IT SAM! I love this content, keep it REET!
IF you get a speeduino ECU work on that you have a super budget build. you can get a ECU to work for 150$ you might get lower if you go in for it. btw a lot of the "low cost" ECU's is based on speeduino.
definitely please build it i wanna see this more
For a bogan r32, the panels all line up better than most R32s here xD Looks like fun!
The shop needs a sammit mural
That gaya factory looks like so much fun. Makes me want to build a driving sim
Dont sleep on the single jingle
which highway loop did you race on? C1, New belt line, yokohama or another part of the highway?
Yes go down that rabbit hole sam let’s see the next gen rb30 builds
Yo, Gaya Factory looks legit, they're rocking Simucube and Moza racing wheel bases. Lots of good wicked setup going on there! I'm also into sim drifting as well
Sam the mad scientist !.In all seriousness doing stuff like this is how the tech we know was first developed .Thomas Edisen said "invention starts with a pile of junk ".
Glad you included the snow that was cool 🤙🏼
Yes single jingle needs a link
Go for it... do the build.. !! ✨🤸♂🤸♂✨
Fold the return fuel line a bit where it comes out of fuel rail and cable tie it so it’s folded with build a bit more fuel pressure making it run a bit richer it’s a little something we’ve learnt after playing with rbs for years haha
I don’t think Sam realizes how expensive kids are.
That piping is so ebisu style, i love it 🎉🎉
Sammit i have a 1994 toytota corolla hatchback and im interested in doing an engine swap if you're gonna get rid of the rb20e then lmk only thing is i live in new zealand
Baby Sammit in the oven is going “WTH IS GOING ON OUT THERE???”
The apprentice of the SR GOD gonna be a RB single jingle GOD 🤣
To be honest, I was mostly enjoying that RB soundtrack 🤤 xD. Very cool video Sam!
Dude this thing sounds sick!
I remember when Sam won is first drift event and he said the pros are now drifting and after 3 years Sam has become a pro drifter
Never mind Ford doing the 1.0 eco boost. Sam coming in clutch with the BoganBoost.
when you see your neighbours stock r32 every morning and an old lady hopping in it "thinking thinking"
YES! one of those smaller intercoolers out the hood between the headlights would be sick for a missile
Sammit so cool watching these videos made more car building videos keep it up.
yes single jingle deserves the luv
R35 coil conversion kit !!
That’s what I’m using my turbo Rb30 r31
This skyline needs to be named Frank like "Frankenstein"
Next time on sammit.............
Can't wait to see you try the harness!
This week on top bogan expect a pinch of "she's a bit how ya goin" and a dash of "she'll be 'roight" 🤣
the rb20 is like the rb30 so alot of rb30 info will work with it and alot of parts also and they do breath well.
hit up the aussies and kiwi's for info. i had a rb30 single in a aussie skyline just head work and a cam,cometic head gasket, stock bottom end and a to4z rb20 det injectors and a haltec ecu and was doing 300 hp atw @12 psi. heaps of torque and full boost by 2000rpm.
Sam's going to raise the prices of single jingle engines like Adam did with blitz
Hey man
Dodgy solution but for testing purposes.
I have done multigrip clamps on the fuel line to raise fuel pressure and make them run richer
I think it's the na compression ratio that gets u good response. Yeah go all out with the $$$.. na to turbo conversions give u that unique ride so it's worth it.
Keep going with it! All of it has already been too easy to not keep going!!!
This video was epic, can’t wait to see the 32 rip. Keep up the good work 👍
Hey Sam, long time follower, just wondering I'm thinking of visiting Japan this year and want to know if September is a good time? Is that the rainy season? Cheers
I think this motor isn't so popular that's why people haven't find a way to make them reliable . The best example is the rotary ... In the recent years there is so many breakthrough that make them reliable .
I think this man just made a breakthrough in the industry again
Would love to see this built!
The sound is absouloutle top!
let's swap RB20 single jingle in all the no-engine shells laying around with a MT trans!!
actually, all the Laurel available for sale now are automatic trans..... whatever, I'd probably start drifting with automatic first....
wow those simlators are insane in the mainframe!!!
I love the street racing one! they even replicated the jump at the exit of the PA that was on the news for being dangerous!! WOW!
I'm an Audi 10VT guy so I am all for seeing a single cam JDM!
Sammit will be the one that frees us from the people on the forums that always say: "rather buy an RB25"
Get a 30e FFP for it clean the engine bay up and make a super nice 20et build
I'm heavily invested still and want you to go further with it properly. I have a c33 laurel with 20e and some parts laying around (turbo etc).
It’s so strange to me hearing people being surprised by the RB20, my mate has an RB20DET in his R31 Skyline and it has about 400hp, they’re just a super responsive RB and they get down, he’s running his with a haltech also, there’s so much potential out of RB20’s and I can’t believe more people aren’t into them. This is is Australia by the way.
It's a RB20E, everybody knows the RB20DET and super responsive RB = the least responsive of the RB engines.
Would love to see a functional reliable turbo kit for the single jingle. 🤩
Not sure why anyone is surprised. The single cam platform is still huge in australia. Pretty sure they have cracked 1800hp with the RB30
such a bad ass studio!!
i think you should do it right, single cams and smaller displacement rev faster. im from puerto rico we never got that engine so the first time i hear about this engine was in this channel so it’s interesting to see and hear it, it sounds badass
i'm so hyped about the single jingle, rb20 tend to be garbage engines but seeing it make some power would be so cool!
Please go down the Single Jingle rabbit hole! I love this bogan mobile content. Let's do it!
Is Sam getting a c33 laurel??
Lengthen out the MAF a bit its too close to the intake of the turbo that is why it shuts off when it comes down to idle, the big turbo is still sucking air at zero TPS and it dumps excessive fuel in the cylinder and floods it.
just do it... that's it.. gonna be wild
Doing dumb stuff with the bogan r32 is now my favourite thing on your channel lmao
I think you should polish that silver paint right up and drop it to the floor rock hard suspension, some wicked 90s alloys and use it as a family saloon, boosted to the max 😂
You should ask them if you could make a stream from their place, I would love to see that!!!
Yeh do it ! And save that silver paint, its slick.... And that intake pipe nearly two metres long could mean it has more boost than you think right now! Did you look at gearboxes that fit it yet!?
use the VL holden plug n play link an repin stuff to work
Go for it!!! Build it!!