2013 Aston Martin Carbon Fiber Side Strakes Installation

Installing Carbon Fiber Side Strakes
Bought From ECPSgroup
Steps:
1) Lift Car
2) Remove wheel using 21mm socket
3) Remove fender liner using T30 and Phillips driver (Not necessary to remove entire liner)
4) Tape the edge of the fender that meets the door and the edge of the door that meets the fender
5) Unscrew 4 nuts and 1 bolt using 10mm rachet wrench
Tools:
21 mm deep impact to remove Wheel
T30 Torx Bit to remove Fender Liner
Philips driver to remove Fender Liner
10mm wrench to remove nuts and bolt
Painters Tape
LOTS OF PATIENTS
The driver side was much easier than the passenger side as there is obstruction not allowing you to get your hands near the nuts.

[@jase6370]

thanks for this!, just about to do this job and found this very helpful

[@Hwang_Over]

Very cool. That's why i made a ton of videos working on the Aston. Glad its helpful.