Siemens DC Drive 6RA80 Training
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- While there are less and less DC motors out there in industry these days, some of the most powerful and impressive systems use DC motors. Today we will be going over the basics of DC motors and drives and how to use Siemens SINAMICS DCM (DC Master) drive for all of your DC controller needs!
Join the Discord Server!
/ discord
Become a Member to get access to all the files created on the streams:
/ @jasonwattsae
In this session:
DC Motor Overview
6RA80 Drive
#siemens #sinamics #dcmotor #drives #industry #training
you did a good job man...
I appreciate it! I do plan on doing more on this. I have to get a load resistor first though... check out all the other stuff as well!
Good work 😊
Thank you!
@@jasonwattsae On another video of yours I had commented for cu320 & dcm oa link.
Now, I am doing cross cutter application where Rotary access is DCM and Camming & technology runs on cu320 dcc.
Will you help me understand what is Flying Homing, also I have question direct reference generated from cu320 bypasses RGF of DCM. Will it affect on motor ?
Flying homing essentially takes the current position and makes it the home position. It is used in cutting applications to reset the home position at the position of the cut edge so that your position is now the length of the sheet (assuming no slipping).
As for bypassing the RFG, you will want to have some sort of controlled acceleration. Which if you are using GMC Gearing on the CU320-2, it is taken care of by you acceleration parameters in the CU320-2.
@@jasonwattsae Firstly I want to thank you for your kind reply.
I will be trying flying home so I'll update on that.
Other than that I'll be testing DCC chart and overall application. So far I didn't saw that Gmc gear in block.
Let me test it once on my end, I'll share my results and video if possible.
Thank you again. 😊
You are welcome!
Sir training module in English if any link can you send me please?. Thanks.
I am not sure what you need. Do you want a document in English on the 6RA80?
@@jasonwattsae Yes sir.correct.not a manual but a Training module in English.if possible please send me.Thanks.
@@palanipps I plan on doing more on the RA80 in the future. I am just very busy with a large job. Keep an eye out!
@@jasonwattsae Ok sir.Thanks.