ฝัง
- เผยแพร่เมื่อ 26 เม.ย. 2024
- Anet A8 Marlin Firmware 1.1.9 Upgrade. Comprehensive guide.
In this video, I will show you 4 different methods how you can install the Marlin firmware 1.1.9 to your 3D printer using the Anet A8 and the Ender 3 as an example. Starting with the USB method then the Arduino UNO, the USBAsp and the USBTinyISP.
Check out, which method will work for you the best to upgrade your printer to the Marlin firmware. Have fun! If you still don't succeed, please post in the comment section, or come to our discord channel!
*** Get the Anet A8 here
geni.us/aneta8
*** Get the Ender 3 here
geni.us/ender3
*** Get the Ender 3 Pro here
geni.us/ender3pro
*** Hardware parts
USBAsp
geni.us/usbasp
USBTinyISP
geni.us/usbtinyisp
10 pin to 6 pin adapter
geni.us/10to6pinadapter
*** Software Download links
Marlin Firmware
www.crosslink.io/marlin-firmw...
Arduino IDE
www.crosslink.io/arduino-ide/
Anet A8 Board definitions
www.crosslink.io/anet-a8-boar...
Ender 3 Board definitions
www.crosslink.io/ender-3-boar...
USBTinyISP Drivers
www.crosslink.io/usbtinyisp-d...
USBAsp Drivers
www.crosslink.io/usbasp-drivers/
THE PRINTERS I USE: kit.co/danielcrosslink/the-3d...
MY MERCH: crosslink.io/shop
BECOME A PATRON: / crosslink
CHAT ON DISCORD: / discord
BUSINESS INQUIRIES ONLY (OR IF YOU WANT TO SEND SOMETHING) - DANIEL@CROSSLINK.IO
FOLLOW ME:
INSTAGRAM - / danielcrosslink
TWITTER - / danielcrosslink
FACEBOOK - / danielcrosslink
WEBSITE: crosslink.io
The Music I use: crosslink.io/es, AMAZING for TH-camrs!
GEAR USED
kit.co/danielcrosslink/my-vid...
Disclaimer: As an Amazon Associate I earn from qualifying purchases. - วิทยาศาสตร์และเทคโนโลยี
![[Устарело] Конфигурация и установка прошивки Marlin 1.1.9](http://i.ytimg.com/vi/pSBb9GLrM1s/mqdefault.jpg)
THANK YOU DANIEL!!!! I have owned an Anet A8 for two years but was always hesitant to change the firmware as other tutorials and info were kind of confusing and I did not want to brick my printer. Daniel's videos are very clear and understandandable as to showing what steps are necessary to upgrade to Marlin. I followed step by step as Daniel showed and was able do the upgrade without any problems whatsoever! I now have Marlin 1.1.9 and thermal runaway protection. Once again THANK YOU DANIEL!!!!
I am glad to hear that the Anet v.1.7 boards are still flashable via USB. I just bought my first 3D printer, an Anet e16, and that is what it has in it. I'm going to go and try this out this weekend!
That is a lot of detail GOOD JOB
This was a fantastic guide. Even though now the 1.8.9 version works just fine. The one problem I had was my own fault was make sure no other programs are running that may block access to the printer. For me it was cura, even though I've had it open for days before getting my printer it automatically connected itself the moment I plugged it in and it was blocking me from updating merlin. That added about 20 minutes to my day lol. Now I get to actually try setting this bugger up to print!
Very informative video as always Daniel!
Thank you very much for your tutorials.
They are clear and easy to follow. It allowed me to flash my Anet A8 v1.5 board and install marlin 2.
Thanks for making this video. I followed the steps and I was able to install the bootloader on my anet a8 1.5 board with the usbasp.
Cool! Thanks for the comment 😁
Thanks again for another great video daniel, i already flashed my Anet using a method from one of your previous videos..Next is my ender 3..
good to read that, thanks!
Great Video Daniel!
Thanks a lot, dude!! Your tutorials are awesome and helped me get the job done!! Thanks again!!!
Many thanks my friend to help us. Finally can update my anet A8 with a new V 1.7 Mainboard and burn the boatlooader, and install Marlin 1.1.9 You have a new subs from Mexico
Your videos are the absolute best
I remember figuring all that out myself without knowing anything about it prior to putting my printer kit together a number of years ago. I won't say how many hours, days, weeks or months (I don't even want to remember how long) it took me to finally figure it out but I did it! All by myself! I didn't know what Marlin was or what printer I had or anything. LOL!
Perfectly explained. Thank you so much
Worked perfectly! Have an Anet A8 v1.5 board. Had to use the USBasp programmer and burn the bootloader onto the Anet board. Using the Arduino 1.8.5 isp on Windows 10 the upload of the Marlin 1.1.9 went flawlessly.
Thank you
Which file is the actual boot loader? optiboot_atmega1284p.hex?
NIce explanations!@! thanks Daniel :)
Perfect! Thank you!
Another great vid
This is a great way to get in touch with the shortcomings of the Atmega1284p and then long for the days of through-hole chips and sockets. Graphic display + SD card + filament change is already too much for 128k.
Technically you could still swap it for the 2560 and enable features to your heart's content but it's safe to say that's a good option for only the most skilled of absolute cheapskates vs Arduino Mega+ RAMPS.
My cheapskate solution was just not to get the graphic display and hardcode my calibrations into firmware without EEPROM save.
wonderful thanks for that!
Are the board definitons the same for the ender 3 and ender 3 pro?
Great vids thank you
Thank you for this tutorial it works well, i use an arduino nano as a ISP programmer because i bought a fake USB ISP that not working :)
Yeah, I know there is a lot of USP ISPs that are not working well. The TinyUSB usually gets me the job done all the time but Arduino nano/uno also work fine. Thanks for commenting, keep up printing!
i am very like ur videos mr daniel
Thanks!
Just ordered one have a couple tevo's and like them, a lot and they are dialed in. I feel like building an anet a8 is a right of passage :D in the 3d print world. I really want to build it and mod it to mirror a Prusa mk3s. Some money investing for sure but I think it is going to be a fun project for the winter months here in Michigan.
if you go that far, also consider upgrading your Mainboard to 32 at a later stage with better stepper drivers. not mandatory, but also quite exciting
Found the problem when the board, Couldn't see it through Cura either. Bought a new board and it works fine. The o;d one works, just can't upload or intact with it, not even through an Arduino. Marlin is installed now and I'm glad. Next project is to build my own frame and put a 32 bit control board on it.
I installed marlin on my anet A8 plus and it overwrite the boot loader so now I’ve got to get a external boot loader so thanks for your help I’m hoping I can do this when I get the boot loader 🙌🏼🙌🏼🙌🏼 one question do I have to take the motherboard out or can I just leave everything connected???
I'm having trouble following your instructions on my Mac is it the same?
Daniel, do you sell an Anet A8 board that has all of this installed? I'm still having issues with my printer. I don't understand any of this. I'm 50 years old and new to printing. Thank you for your help and your videos. I've subscribed!!!
Is there a newer video on how to flash a bootloader on the ender 4.2.7 motherboard?
Hi Daniel,
Thanks a lot for the good work you are investing on this!
Can you please clarify:
What is the better option: completely disconnect the printer’s main board from the printer while bootloader burning or let it in place and turning on while connected to the avr programmer? (Different sources state differently)
Actually I tried all variants and they all worked so don't worry about disconnecting the mainboard.
Crosslink
That’s good to hear! Less effort!
So I plug in the avr thingy in the middle 6 pins of the jtag socket, switch it on and burn the bootloader from Arduino IDE, right?
If I do this one time and install Marlin into my anet A8 board, then if I need to change something in the programm few days later, for example some data in configuration.h folder, do I need to use USBASP, USBTinyisp or Arduino UNO all this percedure again? Or I need just connect Anet A8 board with computer and upload without these programmers?
HELLO Does the BTT SKR 1.4 Turbo mainboard have a bootloader already within it??
Hi this is Mark Blackwood again I forgot to put in my comment that I also upgraded to a new motherboard Anet a8 v1.7
The most of the video was extremely helpful especially as I am new to Arduino, everything has gone correctly and I have burned the bootloader but I am unable to upload the Marlin firmware, I also don't see COM12, do you have a video that can help me out with this problem?
so does the Sengquino config work for the ender 3 pro even if its ATMega2560 instead of ATMega1284?
can you use a Arduino nano v3.0 atmega328p to flash the Anet board
im using the arduino mega with the ramps board, what do I do if I want that to work?
Marlin firmware for communication with this inductive sensor LJ18A3-8-Z / BX-5V can be set
Hi Daniel, I'm using anet A8, got everything flashed and updated, one problem I have is that my SD card isn't working, my printer is in the garage and I use I'mac so not very convenient to move all my stuff every time I want to print something. any advice on enabling SD? I'm pretty hopeless with the programing with Arduino, managed to find couple of resources to add extra code, but didn't know where to implement them.
Help really appreciated
Can u do this for the anycubic mega x?
Hi I downlloaded the bootloader succesfully but when I plug in the Anet A8 board using the USB cable to update the latest Marlin firmware, I cannot get a COM port Does it matter?
Hi. i have the 10-6 pin adapter you mention, but the link light does not come on, and in the arduino ide program the "port" is ghosted out. win10 does see both the usbtinyisp and usbasp. have I done something wrong?? sorry. total noob!!
Hi, Daniel, l great video I am new to 3d printing so any help would be great, I updated to marlin and foolishly did not back configuration file :-( I now have a printer sitting on a marlin screen with no menus I have tried to find basic setting menus like the default that came on the printer and can not find the cf files can you please point me in the right direction I am devastated even though I know its probably easily fixed.
I love your channel, I watch your videos a lot.
I want to flash marlin on my board but im wondering, is it not possible to connect it directly to the usb from the anet? i have a 1.5 board
It normally works. But if you run into issues you might need a programmer.
I have a 1.5v board and can confirm you need a programmer
@@barry0719 I'm glad I saw your comment because I have been trying for over an hour with every combination to get my V1.5 to flash and it keeps saying "error compiling for board Anet V1.0" Seems I'll be getting a programmer now.
Compilation errors might happen before the flashing starts. Can you post the errors here?
@@Crosslink3D I recently bought Anet A8 and have V 1.7 board Is there any method to upgrade to Marlin firmware(1.1.9 or 2.0) without any USBasp, tinyISP and adapters. I have just the uploading cable and board.
for anyone that is struggling to install a bootloader via a USBasp you will need to download zadig and install the driver for the USBasp via that and have it as libusbk(v3.0.7.0) or libusb-win32 (v1.2.6.0) so arduino ide can use it and if it fails to burn you will need to change the arduino AVR Boards by arduino ( the one at the very top) on the board manager to version 1.6.9 and make sure your 3D printer board has nothing plugged into it and is also powered off and it should work but you will need to change the board back to what you had it as before changing it so you can then upload marlin onto it
do u have Anet A2pluse Board definitions
Hey there Daniel,
I've been following this and your other video closely in order to bootload my Ender 3 v1.1.4 but I'm getting this error:
Error while burning the bootloader: Failed chip erase: uploading error: exit status 1
I joined your Discord channel and one of the members was really dedicated in trying to help me but with no sucess, would you be able to take a look at the issue?
Huge thanks and keep up the amazing content!
if anyone rans into the same error try pluging the usbASP into different USB ports (it only works on native USB ports) and installing the drivers plus rebooting the PC multiple times, it worked for me
But my Ender 3 pro has a different motherboard that doesn't have the 2x3 pin plug beside the LCD display plug. It has a different 1x5 pin plug for BL touch but I need to also need to upgrade firmware. How can I upgrade my firmware I don't have that port? Do I really need to go and spend $53 on a new motherboard?
Does an SD card have to be in the board for this to work?
Dumb question...the A8 board is basically plug n play no need to change some things and no way...that I know ...of changing other things. So if I upload Marlin, the board gets a cut down version due to chip size limits....do, is whats left going to put me back to the start up ready to go as the A8 firmware does? I ask because I see FB posts about re writing settings and uploading the adjusted FW.
Hello, I would like to upload Marlin 1.1.9 firmware but I allready crashed a mother board (I had to buy a new one, impossible to make it works again, blue screen and bip, no more blinking led on the motherboard, I will weld a new atmega 1284p chip later), I would like to be sure when you connect the printer to USB, the programmer stills USBasp.
I saw there is some trouble sometimes on v1.7 motherboard
I've messed up. So i think I've done everything right but when i choose the right board in Arduino then try to open the programmer the programmer says there isn't any compatible. There is another issue when formatting the port on my computer it didn't select USBAsp it did a different thing USBHID. I don't know how to fix this, please help, i have put a lot of money into trying to upgrade my printer with BL touch and if this doesn't work I've got a problem. (Also Im using the Ender 3 if that helps)
i updated to this and now it wont print new files off sd card. sill files that were on there before i updated but nothing new. any suggestions?
Sorry let me restate that I'm somewhat new to 3D printing but not a computer Noob I have Marlin 1.1.9 installed I have run into the problem where some prints do okay but most wind up scraping each other after the 2nd to 3rd layers or higher any suggestions on why this is happening thank you and bad is leveled
which configuration do i use for ender 3?
Anet A8 we have a1.1 thin green, mine worked for two days and calfed(died).
Hello,
I have à problem when update en the end :
compilation error on the anet v1 card
Can you help me ?
So if I have a working anet a8 board that is already flashed with marlin but I want to make changes to the config, and those changes result in drawing too big. I will need a usbasp module to get optiboot loaded so I can further customize marlin? Am I understanding this correctly?
Hi, Thanks for your comment! If you managed to flash Marlin with the USB cable you can do this multiple times. The usbasp is only needed if you run into issues or if you run out of flash memory because the firmware gets too big. Then you need to flash either the optiboot bootloader or flash without a bootloader. The bootloader is making it possible to flash over usb.
I cannot get the TInyUSB to work. The port section in Arduino is greyed out. I installed the drivers and it shows it in the device manager. I have it plugged in from laptop from the USB slow that goes in to the TinyUsb but nothing.
I tried to upgrade the firmware of my Anet A8 board v 1.7. The only obstacle was the Arduino IDE. The current version (1.8.10) threw errors. I installed 1.8.9 and I could flash Marlin.
Great! Hope you get awesome prints!
Hi Daniel,
I've got some problems in upgrading the firmware of my Anet A8 to the Marlin Firmware 1.1.9. When compiling the firmware, I always get a lot of error messages regarding redefining of timers (see example):
In file included from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino/Arduino.h:257:0,
from sketch\HAL.h:36,
from sketch\MarlinConfig.h:39,
from sketch\G26_Mesh_Validation_Tool.cpp:27:
C:\Users\Michael\Documents\Arduino\hardware\anet\avr\variants\sanguino/pins_arduino.h:43:0: warning: "TIMER2" redefined
#define TIMER2 5
at the end of the compilation, the message says:
Der Sketch verwendet 104094 Bytes (81%) des Programmspeicherplatzes. Das Maximum sind 126976 Bytes.
Globale Variablen verwenden 4096 Bytes des dynamischen Speichers.
So lack of memory space seems not to be the problem.
I'm using the arduino IDE 1.8.5 (but also tried 1.8.8). When I compile the firmware for a MKS Gen 1.4 Board, there is no problem at all.
Any idea, what can fix the problem?
Michael
Hi, i have problem with my anet a8, i have traid to instal marlin 1.1.9 and i arduino this kind of error has appeared: lulzbot backlash_compensatio_decl' does not name a type. Can you help me what to do with it?
Seems like a lot of effort and extra cost for a cheap printer.
Can we not just use bl touch on the stock Ender 3 firmware?
Hi I need to update the firmware in my A6 Board I have tried the USB method but it seems I have somehow done somethng wrong as it no longer functions apart from a funny clicking noise is it possible to rescue this board
Yes, normally it can be fixed by using one of the three other methods that I have shown 1.) Arduino uno 2.) USBAsp 3.) USBTinyISP
Sir, I have an Anet A6 that I modded so it can possibly print up to 450mm in Z (changed chassis, longer rods, ..) my problem now is that when I print something that is higher then 250mm the printer stops moving the Z-axis because it thinks its as far as it can go. Will I be able to make the printer go higher in Z-axis if I update the firmware? Or, how can I make the printer think it can go more then 250mm high?
Thx.... :/ I will find it out on myself
I got sync errors using both Arduino IDE and VSC. For anyone else that doesn’t have a programmer or UNO handy, you may be able to get around this by switching the board option in IDE from “Marlin AVR Boards” to “Sanguino” (search “Sanguino” by Kristian Lauszus under the Manage Boards option under Tools>Board). My particular Anet board had an ATmega1284P (16MHz). Once I had the correct board and processor selected, IDE verified and uploaded Marlin 2.0 without issues and over USB.
Help. I have tried with no success to install the USBTinyISP on Windows 10. Is it not supported? Keep on getting an error saying the USB devise is not recognized.
Help from anyone please someone new to 3D printing got the basics somewhere I have Marlin 1.1.9 installed some Prince to semi okay most of them wind up scraping the print layer after two to three layers or so any ideas on why this is happening
Hallo Daniel, I am getting this error message when trying to upload marlin 1.1.9 to my Anet 1.0 board "exit status 1
non-constant condition for static assertion" I already installed a boot loader via an USBasb connector which worked error free.
Unfortunately my machine does not work anymore
I have an Anet A8 with the version 1.5 board. When I open the Arduino IDE and try to import the 2 Anet A8 configuration files, the files will not import. I am using the same version of the Arduino IDE that you use in this video. Should I just copy and past the files into the IDE? I want to flash the board so I can use the E3DV6 that I purchased. I would greatly appreciate your advice and insight
Im having similar problems with and anet 1.5,,, on my a6 the board eprom has presets for the A8 and even corrected with repetier it continues to return to a center offset of 30 mm on x axis and 4mm on y axis. downloaded avrdudess and still same "avrdude.exe: stk500_getsync() attempt 10 of 10: not in sync: resp=0xb8" error
win 10 win 7 all the same. tired of the fight, going to submit to new board and going to send the old one back to anet,,, even on the repetier server software the board is labled A8 but they don't seem to understand that the offsets are machine design differences. I shouldnt have to work this hard for a product i paid for.
bought a anet a8plus $150 and no issues, going to flash that with marlin shortly
Hi Daniel. I've used the TinyISP with the adaptor, used the Anet A8 (Optiboot) and had an issue which I can't understand what to do or what i'm doing wrong. First of all, I have a clone of the Anet A8 board and this is the error when I try to burn the bootloader:
Reading | ################################################## | 100% 0.41s
avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x1fc00
0xff != 0x0f
avrdude: verification error; content mismatch
avrdude done. Thank you.
Error while burning bootloader.
Thanks in advance any importance this comment may have had.
PLEASE help. I used my BLTouch USBHISP thinking it'd the same thing after some research and looking the exact same. Ive now made my ender 3 lcd go black and now not working. Now the USBHISP is showing as driver: NONE in zadig. When I try to install WinUSB driver it fails. How can I revert this to be at the least back to the original USBHISP so it can be used for BLTouch again in the future. Unless this does work and I did something wrong. I couldn't get ATmega1284 to come up only Mega1280 and Mega2560 and was told because I have a ender 3 pro its Mega2560. I tries this, and tried uploading it from visual studios via my USBHISP hooked up to the ender 3 pro. Now I have this issue. Any help!?
My board did not light up either when I plugged into it. When I tried to burn the boot I get the error: avrdude: warning: cannot set sck period. please check for usbasp firmware update.
Any suggestions?
Some USBASP clones have older firmware that causes this issue. The only way to solve this is to flash a new firmware to the USBASP controller using another Arduino :-(
@@Crosslink3D The link to the hardware in your description leads to an amazon sold USBasp that needs to be flashed. I just bought it and am a little frustrated. Could you perhaps do a video on this process?
Hello I 've loaded the bootloader, but the arduino IDE does not let me to intall the new firmware, it always shows me an error message, ser_open() can't set com-state for . com5. I believe that it's a usb drivers problem, is there any other form to flash the board besides USB?. In the middle time the printer has no firmwar so it shows only blanc squares on the display.
Thank you very much
There is a driver installation program in a subfolder of the arduino ide folder. you should execute this and then it should see the printer.
I downloaded the file from github and moved it to a folder i made in my Arduino folder called hardware but I am not seeing it in the boards menu in arduino any suggestions?
Can someone help me?
I am trying to install the driver for the usbAsp and there is None written instead of usbser (v1.0.0.0)
And everytime I try replacing the driver it fails also there is only a install driver instead of replace driver
I am using an windows 64x Laptop
That only has 1 USB type A output
I tried to use my pc but same problem
I followed all the steps for the usbtiny solution. When I first got everything connected and ready to burn the bootloader I got the next error on arduino IDE "avrdude: verification error, first mismatch at byte 0x1fc00
0xff != 0x0f". I repeat, I installed the correspondend drivers from ada fruit for the usbtiny and I'm able to see it on the device manager on windows. By the way, the red light on my board stopped blincking at all. Any ideas? :(
Hello David, I might have a workaround. Sometimes the avrdude tool behaves a little strange but you can still convince it to still flash your bootloader anyways. Check your output section of Arduino IDE what command line gets executed to flash the firmware. copy that complete command with all parameters and execute it in a console window but add the -F parameter to it so it will skip the verification. If you are not sure what to do, please come over to the discord channel so we can help you better. It's linked in the Description.
@@Crosslink3D Thanks I'll keep in touch
@@pizzabola Did you find a solution to the verification error? Have the same problem.
@@kodlo007 Hi, I couldn't find any fix to the problem. It could be my computer, or the board, or the firmware. Too many variables. I finally changed mind and went for the Big Tree Tech SKR v1.3, and everything works great.
how do u flash marlin on a anet et4
Hi thanks for the reply but I can't get passed the sketch compiling it just rejects it with something called U8glib.h !!!!!!!!!!!!!! I even tried the TH3D method very easy if you can get passed U8glib.h
Hi Phillip, you might need to add the u8glib library in your arduino IDE. Go to the Libraries Manager by pressing CTRL+SHIFT+i and then search for u8glib. You will find it in the list at the bottom and then you can add it. Should fix your issue then.
@@Crosslink3D Hi thanks for reply it sorted the problem out perfectly now to go back and see if I can tell the controller were the edge of the board is relative to the extruder nozzle home position so that prints in the centre of the build plate thank a gain .
Please help flash firmware for ( anet A8 V2 )
Dear friend, I am very new to this and I just bought an Anet A8 Plus, and I want to install the capacitive calibration sensor, I already printed the support and the sensor is mounted.
The problem is that I can't upload the Marlin to the printer, it gives me a compilation error. My machine has an Anet V1.7 board and I use the Arduino 1.8.11. Is it possible that you can give me some help regarding my problem?
Thank you.
Have you asked this already in our discord channel? If not, please come there and post your error logfile. We can help.
I managed to flash merlin 1.1.9 to my 1.7 board but now I have a problem with no SD card?
Please help 🙏
Hi, recently buy a anet 1.7 board because my printer stop working, i think was the board. how i realise that this new board has the bootloader?.
Do you know what could have happened to the old board?. when i indicate move a motor or preset the bed it turned off, i alrredy replaced the power suply and the printer has the same problem. Now not even power on. I suspect it broke because the eddy current for the motors.
Maybe you have a shortage in a cable. Make sure all cables are still intact. Specially the bed cables are faulty easily. Don't use self-printed cable chains.
can you use a anet a8 board in a anet et4 or do u have a way to put marlin on a et4
Can't tell you either unfortunately. I don't have an ET4. And there is not a default configuration file in Marlin for it, so I guess not a good idea at the moment.
Daniel, thanks for this video. I have just flashed the booloader (optiboot) to my Anet A8 board 1.7. I used tinyUSBisp as one option recommended in this video. I got it in Amazon as a kit: www.amazon.es/dp/B07LH4GMS3?ref=ppx_pop_mob_ap_share. No additional cable needed!!😉
Thus, I have uploaded marlin 2.0 to this board with sucess 👌.
i keep getting the error : oops! make sure you have Arduino Mega selected from tools>board menu. I have tried loading the boot loader (which seems ok) its when i try to upload marlin,i have put anet v1.0 in the board menu,can any one help please
If anyone here is using an Ender3 Pro with the 4.2.2 board, take a look at using the micro SD card to flash the firmware instead.. much easier!
Hi Daniel, follow all the steps and Optiboot ok, but when compiling the Marlin 2.0 bug fix or even the 2.0 at the end comes an error : avr-gcc: error: CreateProcess: No such file or directory
and many errors like (example) : Error while detecting libraries included by C:\Users\pedro\AppData\Local\Temp\arduino_build_923368\sketch\src\gcode\calibrate\G28.cpp
can you help please?
btw Marlin 1.1 I uploaded without any problem... the 2.0 I just can´t compile...
Does the work for Windows 8 as well? you only mentioned Windows 10.
Should work with Windows 8 as well. There is not much difference in how it handles drivers. The big difference I believe was between Windows 7 and 10 where unsigned drivers got blocked.
the ender 3 pro has a 4 pin counter part instead of the 6 pins so the 6 pin connector does not fit, not sure what to do from here
Could you post me a picture on Instagram and mention me? I would love to see it. Maybe you already have a new printer with the next generation of 32 bit boards. I never saw one yet
Crosslink just did, thank you
Looking at the picture you sent me, you seem to have the new v4.2.2 board, which is 32 bit. That board takes a firmware file from the SD card and automatically flashes it once you reset the printer or recycle power. It’s the same board as in the new Ender 3 v2, so you’re one of the first people I see getting this new upgraded board.
y axis stepper motor is getting very hot what can i do
Hello, This is off subject, but need to pick your brain. I have an Anet A6, an am trying to get a 3dtouch probe to function om it. I am using TH3D firmware, it loads fine. Issue is when I try and set up the Z offset in Prontoface i get errors EEPROM data size error. Clearly when I loaded the firmware I had spare space on the Eprom, so that's not it. Printer seems to be working with my jury rigged wiring to include the 3dtouch. When I try and give commands, i get echo:Unknown command: M852 Z0 as an example. Hope you can help. Thanks
Hey mate, all the links referrign to your website are broken...
Hello, i have a Anet A8 1-5 board.....can i flash it or replace the chipset Atmega1248p? someone can help me?
Daniel, I got USBasp from your link. I istalled the driver using zadig and checked it in Device manager. Then, I plug 6 pin cable end into my Anet A8 1.7 board, but I got no any kind of LED light or flashing. Just nothing. I powered my board 24DC and turned off the power. It doesn't
matter. No any kinda led light activ on the board when 6 pin connected. Whats the problem? Is there any way to check if the board is working without any software installed yet? Maybe I should buy USBTinyisp ? Or maybe this new 1.7 board is not good? During the flash in the very beggining I saw some LED red light flash on the board and that's it. I probably bricked it. I don't know if it is possible to fix bricked boards. :(((
i have the same problem i cant fix it, have you managed to fix this?
LEDs flashing on the board while you do the firmware upload is actually good. If the firmware flashes to 100% you did everything right from a connection perspective. What's the issue afterwards?
Sorry for the multiple entries! Don't know how I've accomplished this.
i have an anet 1-5 board and when using the usb i just get an error occurred while uploading, doesn't give me any other info. is that no bootloader?
What error are you getting?
@@Crosslink3D it only said a error occurred, but i figure it out i powered it all off and re plugged in the usb and it worked.
Love that if problems just disappear 😁
Hey
My bedleveling sensor does not work. It goes to one place to calibrate and thats it. How can i fix this please
Do you get an error on the display?
Same problem here
Have you fixed it? If yes then please tell me
Please help... how do I fix the "avrdude: stk500_getsync() attempt 1 of 10: not in sync:" error. I'm running windows 10 fully updated and an Ender 3 Pro with a Silent board.
Probably you're missing the bootloader or it was not flashed correctly at the factory. You will need to install a new bootloader first to be sure. Otherwise, this is just guesswork.
@@Crosslink3D Hi there, thank you for the reply. The issue I had was that there was no bootloader, yes. With Ender 3 Pro you need to use Progisp+1.72 to flash the firmware. My issue was that I was using the USP ISP that came with my BLTouch and it only wants to work with progisp+1.72.
@@InfinityDrones Did you manage to get your hands on the progisp+1.72? Im doing a BL touch upgrade and even after scanning creality up and down i cant find a way to download it, and yes ive tried all the links.
I tried doing this in my anet 1.5 board but i got an error and a time out error when trying to fix the last error. with the upload now my printer only starts with a blank LCD screen and a constant beeping. But i read somewhere that you need to set up AVRDUDESS to get the correct communicating baud rate of 57600 for it to communicate correctly with the main board.
Im having similar problems with and anet 1.5,,, on my a6 the board eprom has presets for the A8 and even corrected with repetier it continues to return to a center offset of 30 mm on x axis and 4mm on y axis. downloaded avrdudess and still same "avrdude.exe: stk500_getsync() attempt 10 of 10: not in sync: resp=0xb8" error
win 10 win 7 all the same. tired of the fight, going to submit to new board and going to send the old one back to anet,,, even on the repetier server software the board is labled A8 but they don't seem to understand that the offsets are machine design differences. I shouldnt have to work this hard for a product i paid for.
bought a anet a8plus $150 and no issues, going to flash that with marlin shortly
@@MrOiam ya i ended up scraping the a6 for an ender 3 pro and now I'm working on a CR 10 S5. Trying to modify the duel z motors to work on a single plug so that i can install a SKR mini E3 into the printer. I'm not sure tho if i need to change voltage settings or not. They are pancake motors not the standard nema 17s.
@@cowboy124aa3 five bucks and you can buy pre-made boards 2 to 1
@@MrOiam ya i know but I'm gonna use it for parts to create my own core xy primer. No real need for the a6 never really printed am that good.
@@cowboy124aa3 Im kinda so to say "pot committed" going to add a 32 bit board and 2130 drivers,,, got all the other upgrades installed,, ridgid mounted, bowden setup, new carriage.
www.thingiverse.com/oiam/make
use this for learning and testing
the 2130 have sensorless endstops and braking,,,thinking of trying to convert my shopbot router over to this,
thinking this purchase
www.amazon.com/KINGPRINT-Smoothieware-Controller-Compatible-With12864LCD/dp/B07RYRNCFQ/ref=pd_cp_328_4/146-2539007-7659423?_encoding=UTF8&pd_rd_i=B07RXQPKLY&pd_rd_r=da54329c-8150-4161-ae16-a140eb288fc6&pd_rd_w=cYPV3&pd_rd_wg=LiinT&pf_rd_p=0e5324e1-c848-4872-bbd5-5be6baedf80e&pf_rd_r=EWTHCGDW8YPTY5XB4VXY&refRID=EWTHCGDW8YPTY5XB4VXY&th=1