ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

Simple dart manipulation through pivot points and slash and spread/close

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ส.ค. 2016
  • While there are many pattern drafting techniques you can use to turn your simple slopers into flattering fashion, there are a few basic techniques that you'll use over and over again. Two of the most fundamental and versatile techniques are dart manipulation via pivot points and slash and spread/close.
    Read more: isntthatsew.org...
    FOR MORE PATTERN MAKING TUTORIALS FROM ISN'T THAT SEW....CHECK OUT....
    WEBSITE: isntthatsew.org/
    FACEBOOK: / isntthatsew
    PINTEREST: / itsew
    CLICK HERE TO SUPPORT ITS: isntthatsew.org...
    FREE VIDEO COURSE - Learn how to draft a custom pair of knit leggings or a knit top! Register here - itsfashionscho...
    LOVE ISN'T THAT SEW? - Become an ITS Insider and gain instant access to exclusive content for member’s only!
    JOIN HERE: isntthatsew.org...
    SUPPORT Isn't that Sew while shopping on amazon!
    (IT ADDS NOTHING TO YOUR CART TOTAL)
    But, it does help me to keep creating videos like this one!
    Click the link below before shopping on Amazon, and a small percentage of that sale will be sent to ITS!
    CLICK HERE TO SUPPORT ITS: isntthatsew.org...
    Below are Affiliate Links that help support our show when you use them!
    The Pattern Making tools I use and recommend:
    Clear Plastic Ruler (C-Thru Ruler)
    amzn.to/2l1xBM2
    Dritz Styling Design, All in one Pattern Ruler
    amzn.to/2lsedsD
    Basic Fairgate Pattern Making Ruler Set
    amzn.to/2kuAq5t
    Advanced Fairgate Pattern Making Ruler Set
    amzn.to/2kQD1aH
    Brown Kraft Paper
    amzn.to/2kQHLwX
    White Banner Paper
    amzn.to/2ls7I9k
    Mechanical Pencil
    amzn.to/2lz6DJE
    Awl
    amzn.to/2lzj3Bh
    Tracing Wheel
    amzn.to/2kQDFFn
    Pattern Notcher
    amzn.to/2kAPwc5
    Notcher, Screw Punch, Tracing wheel, and Awl (Best Value)
    amzn.to/2kutQf9
    Rabbit Pattern Punch
    amzn.to/2lsiwUL
    Pattern Hooks
    amzn.to/2lz6dmo
    Tape Dispensor
    amzn.to/2l1UVJQ
    Paper Scissors
    amzn.to/2lskggV
    Pattern Weights
    amzn.to/2kQJXEV

ความคิดเห็น • 33

  • @drejoicepr
    @drejoicepr 6 ปีที่แล้ว +4

    This method is new for me and after watching a couple of tutorial Finally I found this one as the best. Thank you very much!

  • @Donndexx
    @Donndexx 4 ปีที่แล้ว

    The dart pivot technique has always confused me! But your explanation was so good, I understand it now. Will watch again. Thankyou so much.

  • @jlhhenderson
    @jlhhenderson 4 ปีที่แล้ว

    Awesome video. It really helped me understand the pivot method. Thank you!

  • @teostanciulescu9618
    @teostanciulescu9618 3 ปีที่แล้ว

    the pivot method was really confusing for me, this helped a lot!

  • @haniazahra6034
    @haniazahra6034 3 ปีที่แล้ว

    Finally I found this one as the best
    Thank u❤️❤️😭

  • @rajij5192
    @rajij5192 6 ปีที่แล้ว +2

    Hai... its so easy to learn... can u pls add a video how to make bodice with waist dart alone...

  • @varpumaki
    @varpumaki 5 ปีที่แล้ว +1

    Awesome video ♥️

  • @djdj-sr8dy
    @djdj-sr8dy 5 ปีที่แล้ว

    thank you very much for the awesome tutorial. please would make more tutorials

  • @crazydweller7581
    @crazydweller7581 ปีที่แล้ว

    Can u explain how to make miniature blocks or patterns, I have seen people use it but I don't know how to make one myself. Can u do a video on it?

  • @MaxXanch
    @MaxXanch 7 ปีที่แล้ว +1

    Thanks for sharing! This tutorial is super amazing!

    • @IsntthatSew
      @IsntthatSew  7 ปีที่แล้ว

      You're so welcome! It's a handy technique to have in your arsenal!

  • @nitighelani5622
    @nitighelani5622 5 ปีที่แล้ว

    Really useful 🙏🏽

  • @rosellelouw7495
    @rosellelouw7495 4 หลายเดือนก่อน

    How do I add 2 darts to a dartless bodice? One at the side seam and one at the waist?

  • @Ladysmyth
    @Ladysmyth 7 ปีที่แล้ว +1

    Fabulous!

  • @shoeshinequeen
    @shoeshinequeen 6 ปีที่แล้ว

    awesome and very self explanatory, however, I am a beginner (9 months); and self teaching. (unfortunately, I have not found any (reputable, quality) sewing classes in georgia.) I am having trouble creating a standard bodice block. how do I create a bodice block (details)? how is the apex determined (measured) on the bodice draft pattern? what are the correct measurements for a dart? and where should it begin (from any angle)? Thanks in advance for answering all four (4) questions.

    • @IsntthatSew
      @IsntthatSew  6 ปีที่แล้ว +1

      Hi there! If you do google or youtube search you'll come up with hundreds of tutorials on drafting a bodice. I have a video and blog post of drafting a knit bodice. You find the apex by measuring from the HPS (high point of shoulder) to the "apex" or nipple. You'll need to determine the distance that the apex is from the side seam as well. Then, just plot the two points. Darts can be any size...there is not one right answer. Usually, the bigger the bust - the larger the dart. Hope that helps!

  • @margiebrincheski4293
    @margiebrincheski4293 7 ปีที่แล้ว

    I am enjoying your instructions. Concise and easy to follow. I am not confident to create my own patterns yet, but I am interested in using some of my existing commercial patterns to make them more specific to my size. Can you explain how to use a sloper over top (superimposed) of a commercial pattern. I always need to to a FBA. Thanks.

    • @IsntthatSew
      @IsntthatSew  7 ปีที่แล้ว

      Margie, that sounds like a great idea. Other than the FBA, what is the major fit issue you experience with commercial pattern?

    • @margiebrincheski4293
      @margiebrincheski4293 7 ปีที่แล้ว

      Not much, I'm short (5'3") so I need to shorten most patterns. The most common issue is that when I purchase a commercial pattern according to my bust measurement, it is too large in other areas, so I've read that I should use a smaller size and to a FBA, but I'm not terribly confident to do this.

    • @IsntthatSew
      @IsntthatSew  7 ปีที่แล้ว

      I'm the same height, so I totally understand that! I would agree, it's probably easier to do a Full bust adjustment than it is to tailor the rest of the garment to your body. Did you watch this video ( th-cam.com/video/dFL-SIFW6PQ/w-d-xo.html ) . . . What I would recommend, is to trace off the bodice onto another sheet of paper and practice the FBA. Then, sew a muslin to see how it has turned out. This way, you won't damage the original pattern. You'r other option is to blend sizes. So, use a larger size on top and smaller on bottom, and blend the two pattern together. Feel free to e-mail me at ruth (at) isntthatsew.com . . .

  • @meganfoucher6918
    @meganfoucher6918 7 ปีที่แล้ว +1

    I watched your video on how to add a dart to dartless pattern but am trying to find out how to create two separate darts like you showed here at the beginning of the video. Do you pivot the one dart halfway to create another dart on the shoulder at half the width of the original dart?

    • @IsntthatSew
      @IsntthatSew  7 ปีที่แล้ว

      Hey Megan, I commented twice on your other post...Can you tell me if you are drafting this bodice yourself or is this an existing pattern?

  • @rajij5192
    @rajij5192 6 ปีที่แล้ว +1

    Am able to male either waist dart or side seam dart... but not both... pls rply

    • @IsntthatSew
      @IsntthatSew  6 ปีที่แล้ว

      I'm sorry. I do not understand the question.

  • @annjones3186
    @annjones3186 6 ปีที่แล้ว

    I need help ELIMINATING a French Dart, and turning it into just a side bust dart. I do not need the body of my straight bodice blouse pattern to fit tightly at the waist. Because a French dart is a combination of a body dart and a side bust dart, how would I eliminate the french dart to make it just a side bust dart?

    • @IsntthatSew
      @IsntthatSew  6 ปีที่แล้ว

      You can rotate it to the side just like in the video...I recommend trying in on small scale first. Once you're comfortable, then you can translate that to the full size pattern.

  • @suramichaelbrown2193
    @suramichaelbrown2193 7 ปีที่แล้ว

    if you measure the top and side dart before this and thrn measure the new dart, will it be the same width?

    • @IsntthatSew
      @IsntthatSew  7 ปีที่แล้ว

      Not always. And that's okay, the garment should still fit the same.

  • @ellisch.8133
    @ellisch.8133 6 ปีที่แล้ว

    And what if you want 2 darts , for example a waist and a side dart?

    • @IsntthatSew
      @IsntthatSew  6 ปีที่แล้ว +1

      You can use dart manipulation to split up the existing dart....OR you can slash and spread to add a new dart...

  • @RizaHariati
    @RizaHariati 7 ปีที่แล้ว

    how to adjust it to the back bodice?

    • @IsntthatSew
      @IsntthatSew  7 ปีที่แล้ว +1

      Are you trying to move the darts on the back bodice? If you're trying to manipulate the darts in the same way, use the same exact technique as demonstrated in the video. It works for both front and back!