Muchas gracias amiguito por responder se nota que héres una buena persona pero me preocupa porque se incendio ese cable quisiera hacer un polígrafo de quemar madera si sería posible hacerlo con tu conocimiento de electrónica gracias men 😅😅
I like the translation option Very much. Scematic would be good. Very clever well presented. Nice quick project Wish you well with further projects. From Freddy in uk
TIME 0:35seg do vídeo só faltou aparecer o gênio 😂😂😂 no meio da fumaça kkkk LIKE pelo projeto bem interessante !!! 👊😎👍Gostaria de ver 1 projeto 12 volts suportando de 100 a 150 AMPERES... Aí é bem legal, ok ??? 1 abraçaço.
It’s a Diac DB3 is the oddball part it’s a Triggering device for the Triac or SCR based motor / light dimmer • 32 V trigger device for the oscillator circuit. The rest is pretty common. There’s the BTA41 it’s a 40 amp constant rms current with over a 400amp surge capacity and a maximum of 600-800 vac input Triac! Then a 1/2w 10K ohm fixed resistor, a 220k ohm potentiometer aka (variable resistor) And a 104k or a .001uf to a .002uf capacitor I hope this clarifies parts list schematic is at 5:14 pause it and take a screenshot!
@@sabino511 It’s a Diac DB3 is the oddball part it’s a Triggering device for the Triac or SCR based motor / light dimmer • 32 V trigger device for the oscillator circuit. The rest is pretty common. There’s the BTA41 it’s a 40 amp constant rms current with over a 400amp surge capacity and a maximum of 600-800 vac input Triac! Then a 1/2w 10K ohm fixed resistor, a 220k ohm potentiometer aka (variable resistor) And a 104k or a .001uf to a .002uf capacitor I hope this clarifies parts list schematic is at 5:14 pause it and take a screenshot!
Well done my friend very nice I would like to know To fix it myself. I would like to ask you have you tried when in the drill you have a few turns to try with your hand to stop? Stops or resists and turns;👍
Excelente diseño, servirá para control de temperatura de un cautín? Si lo quiero utilizar para una entrada de voltaje de 127 AC se utilizan los mismos componentes?
Bro thank you, I have a question do you have a project like Efuse or electronic fuse in AC? I need to add that kind of circuit to limit the amps 3-5 amps for 220 volts in AC, thanks in advance
@@RJEDITALL I got it. However... The idea, it is making a electronic fuse cause this will protect a manual regulatory voltage and amps, if we just put a fuse, it will be inconvenient, in addition to replace the fuse each minute when the amps or voltaje excee the limits, thank you.
I made light dimmer using a triac and diac, the problem was my bulb went like high and low of light without touching the potentio. Hope to read a response, I am afraid if it is a short circuit. By the way the bulb i use is 3 watts in 220V
@@RJEDITALL I'll try, I bought a Generic E-DIMMER AC 50-220V 2000W speed controller. But my fan is rated 220V-240V. So I don't think I can reduce speed down by lowering the voltage below 220v, it might damage it right?
I have a questio, Just for CLARITY, is the white wire shown as "AC - In" a negative wire? With 220 volts A/C SAFETY shoul be your first priority when presenting material like this! It can not be assumed that a red wire is LIVE, OR that a black wire is Negative. A clarification please.
encuentro genial tu vídeo 👍,tengo una pregunta para ti,ya que no se nada de electricidad,mi pregunta es,si tengo un inversor de voltaje de 12voltios a 220voltios y 500watts,puedo poner tu invento a la salida de 220voltios del inversor es para conectar un taladro de 1500 watts ?.es para saber no quemar el inversor, espero puedas darme una respuesta 👍
Hi RJ...I appreciated your project, but I has a special issue...The limit the power must be 1600 watts. Could you suggest some tip? If I change the Triac BTA24 600B instead BTA41 600B?
Hello, very interesting. Can i use this circuit to have a variable voltage AC source ? does the voltage changes ? the waveform is still sinusoid ? thanks.
Bagus sekali temuannya, mantap dan teruslah menyempurnakan dan buat rangkaian dan komponennya agar bisa dicobakan banyak orang
Thank u ❤️ for visit
Muchas gracias amiguito por responder se nota que héres una buena persona pero me preocupa porque se incendio ese cable quisiera hacer un polígrafo de quemar madera si sería posible hacerlo con tu conocimiento de electrónica gracias men 😅😅
Excelente aporte. Gracias 👍
Thank you
You can control speed but not torque,when you use this system the drill machine will not take load
Sir, you can try, machine control with load
@@RJEDITALL what he is trying to say is the drill needs PWM(Pulse Width Modulation) not voltage control because you lose a lot of power by it!
Përse komentet nuk më dalin më shqip
Hello ,is what you saying related only to drills and why think so
Ji
A triac work very good as a dimmer at an ohmic load, while an inductive load, at a lower voltage, has no motor torque
Thank you for visit
Hello!!
It works perfectly, thank you
Keep doing proyects with 120v AC
Best regards
From south America, Venezuela 🇻🇪
You can use 110v to 250v
🙏Thanks for your helpful videos to increase my Technical knowledge,🙏
U are most welcome ❤️
Excellent circuit & very useful
Thanks bro
This is a fantastic demo for beginners. however, it needs audio explanation on the values of components attached
Very simple circuit ❤️
Very nice and samuthly working regulator thanks for this
You are most welcome
Merci infiniment je vous félicite beaucoup que le tout puissant vous donne plus de moyens à fin d'éclairer nous autres merci.
U are most welcome ❤️
Am a student of electrical technology engineering this is really great work please be consistent never stop
Thank u very much bro 💗
Very interesting and help full. Thanks
U are welcome
These are very handy right now in South Africa because our electrical service provider can't keep up with supply/demand. So thanks for sharing.🙏🏻
u welcome ❤️
The same circuit is sold as power booster in our market. Am I correct?
sir.aapki.sabhi.video.usefull.hoti.hai.
Thank you very much for comment
I like the translation option
Very much. Scematic would be good. Very clever well presented. Nice quick project
Wish you well with further projects. From Freddy in uk
Thank u for visit ❤️
Alors! Pourquoi ça a pris feu d'après vous, rien n'est monté à l'envert? 😂❤❤❤❤❤❤❤❤
TIME 0:35seg do vídeo só faltou aparecer o gênio 😂😂😂 no meio da fumaça kkkk LIKE pelo projeto bem interessante !!! 👊😎👍Gostaria de ver 1 projeto 12 volts suportando de 100 a 150 AMPERES... Aí é bem legal, ok ??? 1 abraçaço.
Ok, thank you very much
Good tiching karte hai 👌👍👌👌👌👍👌👌👌👍👌👍👌👌👌👍👌👌👌👍👌
Thank you very much for your compliments
Very well explained with circuit diagram ,
Thank
u welcome ❤️
Great..I will try to make one 😎
❤️❤️
Also include schematic in description that will be useful.
Please check diagram in the video
Its at 5:14 ... but only for 2 seconds, blink & ya'll miss it ! 🙄😂
😎👍☘️🍺
Qual número do transito o valor diodo do resitor dos capacitor
It’s a Diac DB3 is the oddball part it’s a Triggering device for the Triac or SCR based motor / light dimmer • 32 V trigger device for the oscillator circuit. The rest is pretty common. There’s the BTA41 it’s a 40 amp constant rms current with over a 400amp surge capacity and a maximum of 600-800 vac input Triac!
Then a 1/2w 10K ohm fixed resistor, a 220k ohm potentiometer aka (variable resistor)
And a 104k or a .001uf to a .002uf capacitor
I hope this clarifies parts list schematic is at 5:14 pause it and take a screenshot!
@@sabino511 It’s a Diac DB3 is the oddball part it’s a Triggering device for the Triac or SCR based motor / light dimmer • 32 V trigger device for the oscillator circuit. The rest is pretty common. There’s the BTA41 it’s a 40 amp constant rms current with over a 400amp surge capacity and a maximum of 600-800 vac input Triac!
Then a 1/2w 10K ohm fixed resistor, a 220k ohm potentiometer aka (variable resistor)
And a 104k or a .001uf to a .002uf capacitor
I hope this clarifies parts list schematic is at 5:14 pause it and take a screenshot!
Excelente amigo
❤️❤️
Good circle thank you for you
U welcome
Hi RJ Edit All, Very usefull video and easy to understand. Good job. Wanted to check If we can use your video for our project?
U are welcome, you make this same to same, and use
good job bro 👍👍👍👍 thanks for video🌹🌹🌹🌹🌹🌹
U are most welcome ❤️
Wow this is amazing
Thank you very much
Good luck...👍👍👍
Thanks
Muito bom, já tem LIKE. Você faz um regulador de voltagem e amperagem DC ?
Please check the recent video
excélante réalisation merçi.
U are most welcome ❤️🩹
Well done my friend very nice I would like to know To fix it myself. I would like to ask you have you tried when in the drill you have a few turns to try with your hand to stop? Stops or resists and turns;👍
Bro, please try it, 100% understand. Thanks
geat. i like video of friend
Thank u ❤️
Thank you master..
U welcome ❤️
Very excellent work. My question is, can we control high-power 3-phase motors with this electrical circuit, and thank you
This circuit working for single phase
Kindly include parts list with values,along with schematic diagram in description. That will help a lot.
Please check the description
@@RJEDITALL pi
😊
Super 💖💖💖💖
AUGUSTINE violinist from Malaysia
Thanks
Hay đấy nhỉ, đã đăng ký kênh của bạn.
As same as fan electronic regulater 🙏🙏💐💐
super working Best ❤️❤️
Thank you very much for comment
Ez nagyon super👍
Thank u ❤️
Esta interesante y muy sencillo. Pocos componentes. 👍👍 ✌✌
Thank you very much for comment
Wow amazing 👌👌
Thanks
@@RJEDITALL motor jal sakti h kya kyuki jese kabhi voltage low hota h to fir पंखे tv kharab ho jate h
@@mohitanshmusic2821 bhai, nahi jalega
Wow thanks for your sharing
Welcome
❤️❤️❤️❤️❤️❤️❤️👍 Bismillahirohmanirrohkhim Assalamu 'Alaikum salam wrhmtullohi wbrktu semoga bermanfaat untuk semua orang banyak amin amin yrbl
Walaikomssalam, thanks for your compliments
Good project
Thanks 👍
That's what I've been looking for is it posable to make one in 220v
Yes, ❤️
It can be use for buffing nice... I take that it will be sustain... The motor...
Nice 👍
Thank u ❤️
Excelente diseño, servirá para control de temperatura de un cautín? Si lo quiero utilizar para una entrada de voltaje de 127 AC se utilizan los mismos componentes?
Yes, same component, thank you for comment
Também é a minha dúvida.
João Luís/ Rio de Janeiro/Brasil.
Bro thank you, I have a question do you have a project like Efuse or electronic fuse in AC? I need to add that kind of circuit to limit the amps 3-5 amps for 220 volts in AC, thanks in advance
You can add fuse, you can connect maximum 20 ampere 220v ac
@@RJEDITALL I got it. However... The idea, it is making a electronic fuse cause this will protect a manual regulatory voltage and amps, if we just put a fuse, it will be inconvenient, in addition to replace the fuse each minute when the amps or voltaje excee the limits, thank you.
Very nice 👍 thanks very much 😊
U welcome
Very good bro 👍🥂
Thanks
@@RJEDITALL 💗
Nice bro thanks
Welcome ❤️
Ise Battrey ki pawr badah sakte he
Ye ek high power regulator
इस रेगुलेटर से 220 वोल्टेज ajust करके क्या हम फ्रिज , कूलर ,पंखा चला सकते है क्योंकि घर में 250 वोल्ट ac आ रही हैं
Yes, chala sakte Hu
Watching sir.. good tutorials..
Thank you very much
Meu brother esse pode ser usado em fonte automotiva
Good job
Thanks
Bro it will work on dc ?
You can try, I don't try
Bro give some details about that capacitor , i can't able to buy
Great, thank you.
U welcome
Voltage regulator are benificial for load less application /fixed loads not for dynamic /changeing loads/torque needs.
How can 1 change the speed then?
@anthonyaichem7950 we need gears to improve torque.
Dear friend, thanks for the projet can I used with 115 AC incoming
Yes,. 100%
Very nice but I heard that it hurts inductive load at slow speed ...please lets know
Perfect regulator for all heavy circuit
Mungkin bagus untuk meningkatkan daya transformer
❤️❤️
Is it okay to use any watts value of bulb ? Or like there should be specific value in the watts of bulb?
I made light dimmer using a triac and diac, the problem was my bulb went like high and low of light without touching the potentio. Hope to read a response, I am afraid if it is a short circuit. By the way the bulb i use is 3 watts in 220V
Thank you, was looking for a circuit like this. Please also upload a circuit for even higher wattages.
you can use this circuit for maximum 7000w
Was looking for acircurt like this. Please also upload a circuit for even higer wattages
Equipamento muito bom
❤️
Hello boss pwede po ba to sa exhaust fan?
Yes, 💯%
What was the purpose of the smokey transformer at the end
@@steevo8025 heavy load test
may i use a triac of 12 Amperes (BT12-600v) instead of 40 A and 1 capacitor of 2.2 pf ? thanks, great project !
You can try, thanks 👍
ভাই কতো নম্বর রেষ্টৈন লাগানো হয়েছে
@@monir5663 10k
Другий точно недоречний.
@@monir5663 66h66ū6
If you want to do motor control properly you need to use pulse width modulation techniques and variable frequency.
Very nice but let the schematic diagram for awhile on ur video so that we copy...greetings from iraq the land of thieves.
Thanks bro, simple circuit screen shot the video
Qual é a tenção minima Qual a frequência É uma senoide de 60 hz ?
Any hz, Any volt
Sir ac 110 transformer chala saktahain??
@@CharubalaDas-i3i yes
Chiedo scusa, avrebbe un progetto per un inverter 500 ? Grazie mille per l'attenzione. Ancora complimenti 💯
❤️❤️
Can i use mosfect i r f n 44 and dioud 5408?
Not possible
Are you making it?
Connect the pure sine inverter circuit to see a little.
Sir isme G coil ya spring coil coocktop chala sakte hai?
Up to 4000w chala sakte ho
Sir mene 1000w spring coil ka small piece something 500w try kiya but coil shot ho gyi. Low w heater 400-500 Watt ka circuit bataye. Please
Wow... Great 👍 i have tried with BT136 but no satisfaction. I will try this. Thank you ❤️
U welcome sir
This circuit change the output voltage or frequency.
Very nice 👍
Thanks bro
superbe ................./thank ............../
U are welcome
Thank you
U welcome
Can I use a 12v power input to supply power that this system?
You can try
Hello, can I use a 6 p potensiometer
No
can i use something like this on a 3 speed pedestal fan motor to reduce it's speed? will it create excess heat and ruin the motor or waste energy?
I didn't try, you try
@@RJEDITALL I'll try, I bought a Generic E-DIMMER AC 50-220V 2000W speed controller. But my fan is rated 220V-240V. So I don't think I can reduce speed down by lowering the voltage below 220v, it might damage it right?
@@AlexAugustinex you can use up to 300v ac
What are the output voltage is it regulate? 110? Or 220 with wattage regulated?
Working both voltage
parabéns é like
Thank u very much ❤️❤️
I have a questio,
Just for CLARITY, is the white wire shown as "AC - In" a negative wire?
With 220 volts A/C SAFETY shoul be your first priority when presenting material like this!
It can not be assumed that a red wire is LIVE, OR that a black wire is Negative.
A clarification please.
You can use both wire. Same to same On/Off switch connection
Insulation pad is necessary or not? collar washer kha se milte h?
You can use any white paper.
Muito legal adotei
Thank u sir ❤️
O regulador não esquenta muito?
No heating problems
Nice
Can you make Battery operated drill machine controller ? 12 v or above
You can try
You can Do better I think...
So please you Try on Battery operated Drill machine Regulator...
Thanks.....for ...this
Pwm
Can we use this for cooler ?
Yes, 100%
can i use this for fish stunner? 🙂
Yes, you can try
Can use input supply from accu 12v 65ampere?
You can try
Muito bom o projeto gostei🙋👍👍
Thank you for your compliments
thank you too!!
Bhai ye aapne fan ka regulator banaya hai
Ok, thanks
encuentro genial tu vídeo 👍,tengo una pregunta para ti,ya que no se nada de electricidad,mi pregunta es,si tengo un inversor de voltaje de 12voltios a 220voltios y 500watts,puedo poner tu invento a la salida de 220voltios del inversor es para conectar un taladro de 1500 watts ?.es para saber no quemar el inversor, espero puedas darme una respuesta 👍
Yes, you can use this circuit for your inverter
@@RJEDITALL ok 👍, muchas gracias
Muito Bom, show
Thanks
Hi RJ...I appreciated your project, but I has a special issue...The limit the power must be 1600 watts. Could you suggest some tip? If I change the Triac BTA24 600B instead BTA41 600B?
Same work you can use,
@@RJEDITALL thanks
Hello, very interesting. Can i use this circuit to have a variable voltage AC source ? does the voltage changes ? the waveform is still sinusoid ? thanks.
Yes, you can use for ac variable voltage
@@RJEDITALL Will it be sinewave form ? Thanks
@@hichamtassi1753 la onda nunca va ser senoidal xq cuando usas scr o triac