Sony SLVR1000 SVHS VCR Eats tape. Not the standard broken gear either.
ฝัง
- เผยแพร่เมื่อ 11 ก.ค. 2023
- This Sony is eating tapes. Standard fault on these is the broken left (supply) threading gear but that wasn't the case with this one. Let's see what went wrong with this one. Customer bought it on kijiji purchase a few years ago and it used to work.
These are actually very good machines, one of the better SVHS decks ever made from a picture quality perspective. They are pretty durable too except for the blue gear syndrom. - วิทยาศาสตร์และเทคโนโลยี
It was always worth my time going the extra mile and taking care of possible bad solder connections while I had the machine in this state of disassembly. Rarely, if ever, had one come back.
I learned so much from this guy ! At some point i even start hauling broken VCR's because I loved repairing them, all because of Dave. Thanks Dave for all your work and videos !
Fixing VCRs us almost therapeutic. Almost.
@@12voltvids For the Sony VCR/DVD combo SLV-300P, it works fine but it's just the picture quality is not clear. Because it's got contamination which is the static screen. Looks like I could use some help. I tried to use the rubbing alcohol 70%. Help. To make the picture quality clear for the Sony VCR/DVD combo SLV-300P.
That seems to be a very good vcr. lots of features.
Yes it is a good one.
That’s awesome….your very good at fixing this stuff….well done!!!!
Well I should be, I did it for a living for over 20 years.
@@12voltvids I just mean that with the older technology it's a specialty and you obviously know it like the back of your hand interesting to watch thanks for the videos!!!!!!
@@electronicsanta8149
I try not to learn too much about the newer tech. Some of the old guys like even the older tech. Tubes. They are good for audio amplifiers and that's about it.
Great Video Keep them Coming. 👍
Trust me, the hearing protection only makes it less loud, not less annoying.
“Maybe it was Russia” that was great👍🤣
I know this video isn't related, but I have a Teac - V 770 that I have been working on, off and on for awhile. I used a 440 tone tape to adjust the speed, and after the deck warms up after awhile ill check the speed with my guitar tuner and it always increases slightly. I've recorded on it and i'll play back on another deck and of course it sounds slightly slow. I've changed the capacitors on the board for the power supply, most were bad besides a few. I've lubed the capstan and even changed the belt. I also used rubber renue on the Idler and Pinch roller. And for the hell of it I even tried another motor I had on hand and it does the exact same thing even after cracking them open and lubing them up. The only thing I haven't done is pull the reel motor out. I'm assuming this isn't normal performance, Any advice from you or anyone in the comment section would be great, before I chuck it out the window or sell it for 20 bucks. Thanks.
Probably the capstan bearing is dry and once heats up it loosens up a bit.
Nice work again, What do you think of the Sony EV-S500 Video 8 home recorder?
there putting in new gas in our road and its very noisy and hard to get down the road. weather has gone very cold for Essex to.
You also stated that you follow cars. Me? I've gotten interested in Ford model A's. The more that I watch sites on them, the more I'm impressed at the engineering that has gone into them. One of my favorite people that have several models and years are the Shinns. Paul and Tina. They go to all the meets and create totorials on these cars.
You should join on of the model a clubs mafca or mark
Ya I like cars and bikes. All types. My cousin had about a dozen cars. Model A, model T, 57 chevy, fargo panel van, 3 corvettes, a 54, 72 and 2004 if I remember them all. A 1969 cougar with a 351 Cleavland with Holly 4 barrel that my aunt gave him (I learned to drive on that car and was pissed that it wasn't left to me). Corvair, Stdebaker, 68 Mustang, 54 T bird. All were meticulously restored. When he died about 6 years ago he left all the cars to his buddies in the car club. He left nothing to family. He had no kids, but he did have a nephew and a couple neices and plenty of cousins. Nope we got nothing all his pals in the car club won the lottery. Asshole. I should go look up his grave site and piss on the head stone.
Do all VCR's have that gear the one that you call the blue gear? Like Panasonic's
They all have various gears in them. The "blue" gear is actually the left threading gear and all the Sony VHS models that use this same chassis (555 757 585 585 686 R5 R1000 svo2000) use the same chassis. Different chassis is different parts.
Hi Dave, I have one with this same chassis im looking into fixing atm and was wondering, that white gear on the topside with the little raised section to it. Is the gear replaceable like the blue one if you get one of those break? thanks
The sub cam gear that operates the P9 guide can break of the p6. It is no longer available but I may have one I can sell.
@@12voltvids I could possibly Dave only thing is that vcr (my actual one from back in the day) it does need another drum head and the usual blue gear too (mines white). The head I seen is 75 bucks plus shipping on ebay, it comes from Greece, I live in Australia so god knows. Ive seen a couple of the same but faulty whole vcr's in the country I can get for around 60bucks or so I suspect they're probably going to be just the blue gear and might need a general service, may go with one of those. I was just putting some feelers out there to try and work out what I may do with this thing and was generally curious if the other gear was still even available as i couldn't find anything at Wagner or anywhere else. Thanks heaps for replying
Last week, his model VCR sold for $80 at the Alberta Government online auction. There still is a market for these things.
Archiving old content mostly I would imagine. I don't see any vald reason to be recording anything on tape.
The exception to this is to get an authentic look, and I might do a video on just this.
Produce a video in on the computer take it to tape and then back and show the process for the desired results of old home video without using emulators and filters.
@@12voltvids There’s a number of musicians who are interested in analog recording that hunt for these units as mixdown decks, as opposed to reel-to-reel machines. I picked up a Sony SLV-998HF for that reason. On that note they have to be a HiFi stereo unit, rather than the old linear audio ones. But the audio quality compared to a R2R is excellent.
but what was that ripped belt on the left spindle? there was a single white belt on the left Tape-Spindle that was literally ripped in half and was just laying around in there... Doesn't this belt need to go somewhere too or is it not actively needed?
What belt? There is only one, the toothed orange belt on the bottom. You talking about the back tension brake band?
Hi Dave, just wait until they start using the jackhammer!!!, a heck of a lot of noise !!
Well they were cutting the pavement with a saw so no jackhammer this time.
@@12voltvids Yeah, but they have to jackhammer the bits of asphalt out, then dig to replace the old water main, your neighbor on the corner is going to get the brunt of all the construction noise !
@@b.powell3480 Joe will probably just use his hoe to dig our the strip cut our. Fingers crossed.
They always manage to start big construction projects at the peak of busy seasons! We just had gas mains replaced on the exit street and that tied up traffic for months.
@@Sans_Solo_ well they have to do it in nice weather. Can't have the city workers out in the rain and cold 😫🤣😣
There are still people that find a vcr useful, not dead yet.
I dont throw things away just because some arsehole says so.
That sony advert was funny, i bet people remembered sony when buying a camera :-D
Sony advert? I didn't know they made vhs-c.
Is tap water drinkable there in your area? in Finland everyone drinks tap water, we take it for granted but i know that in some places it is not so
Yes it is probably the best in the world here.
No broken blue gear
The blue gear wasn't blue...
The original was geay then white then blue. They all break
It is hungry.
P.S. yes, I agree that company was very unfair.
Probably that prick Johnny send check.
That Deoxit voting VPN story is crazy. Like why would someone even try to fix up that voting (outside of yourself, which you didn't).? Sounds more like a mistake on their part, or disingenuous reason to disqualify you without telling the real reason.
The reason I think it could still be a mistake, is that detecting VPNs is still hard. Google still hasn't figured it out themselves either. Lately I've had to block their IPv6 addresses because they've been CAPTCHA-ing the 6in4 tunnel broker I use (Hurricane Electric) to get IPv6 support while my ISP still doesn't support it. And Google flags it as VPN DDOS.
Have no idea. Got an email telling me i was disqualified and when I replied back they said an investigation showed irregular voting patterns that they said we as vpn related and both me and the guy in 2nd place had been disqualified. That's all i know.
@@12voltvids Yeah, I wasn't expecting you to know more.... I was just rambling my surprise.
Maybe it was the third guy wanting you to be disqualified 😂
@@jeremiefaucher-goulet3365 or the guy that writes to everyone but Santa clause trying to get my channel taken down. Old johbbe shithead
He more than likelly ran out of gas, those pressure cutters are gas hungry little buggers.
🇹🇷🇹🇷🇹🇷🇹🇷💯💯💯💯👍👍👍👍
>Maybe it was Russia< Посмеялся .
It was probably the guy doing it because they said they had been tipped that fraud was being commuted and after investigating and auditing it was discovered that a single ip was tunneling in from different locations to vote. Hmmm sounds fishy.
Dave, things go somewhere else when watching people do their thing. Here is another case of this. You mentioned Deoxit and the fact that you don't promote them and then Russia. I have found out that my family is directly connected with the Ukraine. One of my relatives family's great grandfather was from Ukraine. Went to the university in Russia and became the designer of helicopters.
His name Igor Sikorsky. They boys are my second cousins. Go figure. BTW, still learning from your insight and experience. Also, I got some new Deoxit because of your mention that it has a shelf life.
The whole thing about Russia was a joke. Unless you have living under a rock Russian hackers have been all over media for years including influencing election results. I got an email from the manufacturer at the office at telling me that my entry had been disqualified due to irregular voting and them detecting people using vpns to mask their identity and cast multiple votes. Now since I had nothing to do with that as I couldn't vote for myself even if I wanted to, someone external did it and aparantly they were anonymously tipped off to the fact. I was way ahead and the results and had no knowledge of anything going on in the background as I wasn't monitoring. Just like the year prior when I was contacted after winning that I had won the contest. After they emailed me I contacted them and asked him what was going on and they said that they had received the tip that someone had been using a VPN to have them to vote more than once a day and upon doing an audit they traced it back to one source IP. You see the thing that people don't understand is that using a VPN does not hide your true identity it's actually not that hard to trace originating up address. some of the better paid services might mask your location a little better but the free ones that are out there you might as well not be using one at all. All it takes is a lawyer to write a letter to a VPN provider and threaten them with legal action if they don't reveal the source. The VPN provider might not tell them the name but they will certainly confirm if provided with timestamps from their outgoing server if the original connection came from the same IP. That's apparently what they did was they went to the VPN provider gave them a list of time stamps and the IP that the VPN was using and asked them to confirm of it was the same user at all those times and it was and that was all they needed. So they didn't know who was doing it but they did know that the originating IP was the same I'm that same IP was putting in multiple votes for both me and the guy in second place so we both got disqualified. At least that's the way they explained it to me either way it leaves a bad taste in my mouth because I had nothing to do with it yet I was penalized because of a troll and we'll leave it at that. I have my hunches as to who it might have been the guy in Florida actually that's been creating a lot of shit for the last 5 or 6 years.
Oh those russians