XShot Eliminator Mod Guide
ฝัง
- เผยแพร่เมื่อ 13 ม.ค. 2017
- As promised here is the full mod guide for the XShot eliminator.
Captain Xavier
Etsy Shop:
www.etsy.com/shop/CaptainXCommissions
Commission Inquiries:
captain.xavier.commissions@gmail.com
Facebook Page:
CaptainXavier
Mailing Address:
Chaylo Laurino
P.O. Box 111515
Tacoma, Wa 98411
Theme song source: archive.org/details/CarminaBu...
Alterations: spliced. - แนวปฏิบัติและการใช้ชีวิต
![[ไฮไลต์] แบดมินตันชาย วิว กุลวุฒิ ไทย vs ฟินแลนด์ รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/GIbeFO0tvnQ/mqdefault.jpg)
A friend of mine just gave me one of these. Thanks for the help with this mod guide. I drilled a hole on the other side of the rotary thing so holes would line up with barrels. Glued it to the barrels, used some tubing to seal the plunger tube to the rotary thing. Added a stock longshot spring to stock spring. And changed catch spring. Works great!
Works so well!
The way you show the stats and how they increased is way better now than the last time I saw it because then you didn't leave it on screen. This way now you have the direct comparison without having to memorize all those values. Which is good, because I can't remember much :D Great video. Keep em coming! Btw, I don't really know anything about Nerf nor do I care too much but your videos are very entertaining, so far I've watched every one of them and I plan on continuing to do so. Aye from Germany, my Capn! :)
I don't even Nerf but I watch your videos anyway. Great stuff!! I fly/build RC planes so I can appreciate this stuff. You really turned this thing into a beast.
I bought one of these for 2$ at good will, I was like dam
Filled the gap with a straw wrapped in duct tape. (left stock spring) seems to fire about the same as before but now it's a shotgun which is great because I bought it thinking it was. Thanks Cap!
you can just push those tabs down, its off easy then
I used a Big Bad Bow spring with a coil and a half cut off and mine hits about the same. Nice video man.
Very good vid keep em coming Captain
Dude your videos are amazing
I just got a slingfire, xploderz mayhem, super soakers mag, and my personal favorite a Vulcan with everything but the tripod all of $6 total!
love this video man good job
Thanks!
Have you thought about mounting a Terrascout on your shoulders. So not only can you shoot with a blaster on your shoulder, but you can move and aim with it.
Anyone have any recommendations for what Longshot upgrade spring to use? I threw in a basic spring taken from a Longshot and I'm only getting ~55FPS
I might gert a bunch of those, and work on integrating a smart AR from some other blaster into it, so you can still have single shot but also have the beefed springs.
ok just like last video. what was the first n strike blaster
The elastic on my stock crosbolt snapped enough to i couldn't it back in. has this happened to anyone?
I got the Dino version of this yesterday, thanks to this video I was able to getting it shooting both barrels.
I play Nerf with my kids so no need for a stronger spring.
I didnt have tubing to bridge the gap, so I removed the Air restriction. Then drilled out the blocks on the turning wheel.
So it essentially does the same internally but gets the double shot as nothing is blocking the air. Still seems quite powerful.
So thanks for the video, really helped and brought me half hour of fun.
Excellent!
Your vids r awesome u should do a double recon ! 👍
Can you make a video on it shooting both barrels at once ?
glad you turned the Blue goo into blood, I would do this and make the blood Green for Xenos or Space Orc slaying.
God I need to find some way to get my hands on these, except I'm halfway across the world.
When is your nerf drainblaster mortar gonna be done?
can a sharpshot take a k26?
I remember buying one of these years ago!! Mine worked so well out of the box, and still does!
I plan on painting and modding my dual Doublestrikes. Any ideas for springs and paint jobs?
Patrick Warnars white base with light blue detail and add a hook on the grips to dual wield, ez pz
love ur vids
Thanks!
hey captain, I have some old airsoft gun springs if you would like them , they are kinda small but incredibly stout, yours if you would like, I have no use for them because i have already done all the spring upgrades i plan on doing to my guns
Absolutely!
just modded mine, I added a recon stock spring and sealed the plungerhead. removed the barrel selection mechanism but left the AR in. so in can now shoot either one or two darts, whatever the situation requiers.
so far unpainted, not sure about the color yet. oh and i removed the handguard, since it was not really comfortable.
note: the recon spring only fits if you remove the hook for the grey bar of the selection mechanism on the plungerrod.
Nice! I plan to do the AR thing on the next one I mod for that very reason.
I am overhauling a demolisher, I am putting 180s in there, 16A microswitch, 16AWG wiring, and I ran into a snag. I know a lot of people use lipo power, the problem is my dad is worried about a lipo since he has heard they catch fire and stuff( he knows stuff about rc cars). Do you know how many imrs it would take to get enough power to run the 180s effectively? I do have access to imrs, I am just wondering how many it will take.
Well you can run 130's on 4 so at least that many. Do not quote me though. I am actually still pretty new at modding flywheelers.
Captain Xavier okay, thanks. Would you say 6 would be a good amount? Also, how would you attach them? Are there any 6 AA battery holders that you know of? I'm hoping to do a video on it on my channel when it is done. I'm planning to start youtube. For some reason I have 6 subscribers, and I have never told a single person about it :P
For the eliminator I got it had the rotation mech inside of the plunger tube. I also opted to keep the ar in only because I wanted the option to be able to fire 1 dart at a time as well, just my preference
I was also getting about 60-70ish fps and getting 20-30 meters or 50-60ft
Do the spring powered part of the Vulcan for Can It Take a K26!
Do you think you could make this a break action shotgun? I've been thinking about this and was wondering how you would approach this. I have not bought this blaster yet because money and I'm worried that this project would not work.
Anything is possible, but it would not be easy or practical.
@@CaptainXavier that is a good point, thank you for your encouragement
Try putting a doominator cylinder in a strongarm or making an absolver
nice
Do you know what kind/size of hose you used?
I do not, no. Some kind of hydraulic hose from a hardware store, I think.
by the way can you do a can it take a K26 on a sharp fire
do you have the stormtrooper blaster that loads like a rampage?
yes
I want me one of those! Think an old Alpha Trooper spring would fit? They are just a tad larger than a longshot spring.
EDIT: Well of course it will fit, I meant would it work well.
I have no idea. :(
Captain Xavier
Thanks for the reply. I will see if I can find one to test.
Great video!!! I hope I see more war footage with this.
Man am I having a day!
TG Monkey let it all out homie we r all friends here :) except jimmy, fk that guy
How would I seal the two parts together after taking the rotation mech out
I used a bit of hose. Other people have used a cut up ball point pen. You could use metal tube also.
@@CaptainXavier thanks for the reply, I remember you were always good at that 3 years back, I actually ended up dremel-ing out holes in the rotation mech
Make it a sawn off shorter than it already is. Is that possible
Yes, I have done a cut down version.
You have any video's on making Left-handed holsters?
+Lone Wolf not yet
Captain Xavier Okay.
Lone Wolf it's like an inside out right handed holster.
Finally got one of these for 4$ a steal in my opinion.
You should make a bolt action mag feed carbine type weapon like the gewher 98 ( I don't know guns but I think that's what it's called)
Roses are red
Violets are blue
If you want a better barrel break
Go to 4:42
Edit: Could you do the same thing with the Vigilante?
what size hose did you use?
No idea. It just looked around my shop till I found something that fit. :/
I did the same thing too but minus the spring upgrade
super shotgun!!!!
when are you going to reply to all your commissions I emailed you a 3 weeks ago
I may have gotten lost. Did you send it to my email or my Etsy?
Your etsy
the only thing i did to mine was upgrade the spiring and make it look like doomguys super shotgun
where do you get springs?
Mostly from scrapped blasters.
Why must the answer always be a rubber hose?
Because it works? :P
I fully agree, it is a great blaster when modded. That damn rotational mech is so incredibly air inefficient, it isn't funny. Your numbers prove it. The blaster also just LOOKS good (when you get rid of those gimmicky bug goo splotches).
Oh, by the by... how's that nerf mortar project coming along? :p
L. Sanders I am terribly curious if the rotational removal is *enough* mod on its own...
David Bolack if you removed the rotational mech and added the hose to make a better seal, I think it would be an "ok" shotgun. You'd be lucky to break twenty feet, in my opinion, but it would function.
hello captain xavier
Hi!
Hey man! Would you ever sell me a nerf sniper rifle? A buzzbeee snipe works. Something like that with a paint job and some mods. If so how much would it cost?
MrGummy Look at his commission video.
Hey, Cap'n, I'll bet money that despite your goodwill runs, you have never found an ERTL Doomsayer, cuz' I just did!
The Magazine Is Half Full give him time.
I have always thought about a mod tho. I might try it some day, thanks!
Anyone know where you can get rubber tube like that?
I got mine at an Ace Hardware
Thanks!
Can you do a nerf stampede mod guide (not as in depth as Ire)
InfintyHype117 !!! yes. yes I can.
Captain Xavier I have a stampede that just lays around, an up to date good quality mod guide for it would be nice.... still need to learn how to paint tho....
I have that same yellow screw driver
BTW does utube pay u at all?
Supposedly they will eventually...
*insert sad face
When I bought the blaster I thought she'd open it to put the ammunition like a sawed off shotgun real.
Have you found any strife's lately. If yes wear
The last place I ordered some was online from Toys R Us.
I am starting a business
repairing and moding nerf blasters
I am also going to goodwill
to mod blasters that I get there
and selling them to my friends.
How do you figure out a price for a modded
nerf blaster?
Liam everything bit late, but what I'd do is add up the price of the stock nerf gun (retail price), the price of the parts (plus like £2 or $) and depending how much effort it required, the price of labour.
when your electric guns don't work, use hand warmers to warm the battery, its what I do for airsoft
I will keep this in mind. Thanks!
your welcome, hope i can help
make it sniper and modular
50th like
10th like
7th like
138 person to watch
sorry 175 perrson
I know im late but DOOM MUDDA ####ER!
Hi Papi Xavier ( ͡° ͜ʖ ͡°)
Make a sniper out of it, just make it more accurate and maybe make it more modular to allow it use different types of ammunition.
10th comment
In Florida you have to worry about you battery’s getting to hot:)
...This blaster does not have a battery...or is this just random info?
Captain Xavier You were mentioning that all of your electronic blasters went down in the beginning of the video and that is where this came from.
lol anyone ever tell you that you're horrifying in battle?
Yes. Pretty much every time I take the field...
Mod Guine? Don't try and tell me you did that on porpoise...
Dave Freeman nope. just bad editting...
If your videos weren't so goo, I wouldn't have to pick nits. ;-)
Springs
What?
Get another gun like that then mod
Its funny cuz nobody's finished the vid yet
20525th!