Mastercam Dynamic Milling - Every Parameter Part 1 of 5

There are many settings inside of Mastercam 2D Dynamic Milling Toolpath. This video series will cover every single setting and provide examples for each.
In this first video starts by looking at the Cut Order Optimization field. Here we have options for Material, Air, or None. When the tool finishes a machining pass, it must select a start point to resume from. ‘Material’ will start at the material that is closest to the tool, ‘None’ will start at the most recently machined material, and ‘Air’ starts nearest to the tool.
Next we look at the Cutting Method which also contains the optional Conventional Feedrate setting. Cut Method sets the machining direction of the toolpath. Climb sets the direction of the cut to be opposite of the tool rotation. Conventional sets the direction of the cut to be the same as the tool rotation. Zig Zag allows both Climb and Conventional tool directions. With the Zig Zag Cutting Method chosen, the Conventional Feedrate setting becomes available. This allows setting a different feedrate for the Conventional motion during this toolpath.
The benefit of Zig Zag is to cut down on time when the machine is not cutting. However, sometimes Conventional cutting is not ideal at the same feedrates as a Climb cut. Being able to adjust this feedrate allows utilizing the Zig Zag motion while not damaging the cutter by over feeding in a Conventional cutting motion.
We will continue with this file in the next video.
#Mastercam #LearnCNC

[@leisersaenz]

Thank you very much

[@CamInstructor]

Part 2 is on it's way, check back next week (November 11, 2016)

[@totnguyen3324]

Thanks you so much!

[@CamInstructor]

You're welcome!

[@swifplaya]

Nicely done

[@gachalifegirliluvpink6719]

So good video, thks, hello Sir, could you some day make video about how to click complex chains on some cut out areas on model, thks so much

[@williamgarner4290]

Every time I get on, there is never a green check box when linking parameters. 4 parts behind in class already. What a great program.

[@mardrom1]

7000 views to date and NOONE has asked where is part 2 to 5?
Mathew!!! Some info please?

[@ug6442]

Is it possible to give us the sample part to practice?

[@CamInstructor]

Parts are available in the course.

[@mdkhairul2025]

sir I want to know. how to setting level

[@smithjan1409]

Can you show how to create this drawing please?

[@CamInstructor]

Added to the list! :)

[@leisersaenz]

​@@CamInstructordo you sell master cam tutorial videos?

[@TheDamage50]

Is this real?

[@CamInstructor]

Yes, pinch yourself...this is real.