Hello there, ive been working on something similar where the video has been very helpful. Although there is a change where when you are setting up the animation on 4:38 in the new Ansys 2019 R3 I cant seem to find the interior fluid domain for the surface reference you used ive been stuck there for quite some time now. Thanks for your amazing tutorial and thanks in advance.
Hello I followed this tutorial but my domain does not contain water at zero time step. The water starts adding to the domain with wave . How to solve this error?
Hi sir I am a student i wanted to do cfd on Formula1 race car i am trying to do but some problems are getting how can i do this so plzz can you explain ??? By a video plzz sir
First of all warm Greetings from Nepal !!! I am modeling an open channel flow of settling basin of hydro power with sedimentation.While setting the free surface level of the water I was not able to specify the top and bottom level as my geometry is sloped and the elevations of the inlet and outlet are also varying in the Y direction. Please find the geometry attached down below and guide me. Inlet Mass Flow Rate:10 m3/s The outlets are the two rectangular extrusions at the end. I have made the fluid domain by keeping a free board of 1.5 m from the free surface of the water. Geometry Link drive.google.com/open?id=1BmPdMWurqg7O0Np4i_wiM_WaZkggtTnP Hoping for your reply
Hi, on the monitors initialization. I have error says flow boundary zone found adjacent to solid zone. How do I fix it. TY very much
Have you set the materials properly in the cellzone condition. ?
Hello there, ive been working on something similar where the video has been very helpful. Although there is a change where when you are setting up the animation on 4:38 in the new Ansys 2019 R3 I cant seem to find the interior fluid domain for the surface reference you used ive been stuck there for quite some time now. Thanks for your amazing tutorial and thanks in advance.
Interior volume option is not available in newer versions. You can create a reference plane to observe the animation.
@@AnsysTutor how can we create this
Hi
Why you consider water secend phase.
And you in tenstion write 72
That is 0.072!
Please help me.
sorry it was a mistake, thanks for pointing , the surface tension between water and air would be 0.072 N/m
Hello
I followed this tutorial but my domain does not contain water at zero time step. The water starts adding to the domain with wave . How to solve this error?
Have you applied patching?
Hi sir
I am a student i wanted to do cfd on Formula1 race car i am trying to do but some problems are getting how can i do this so plzz can you explain ??? By a video plzz sir
what are the problems that you are getting.
First of all warm Greetings from Nepal !!!
I am modeling an open channel flow of settling basin of hydro power with sedimentation.While setting the free surface level of the water I was not able to specify the top and bottom level as my geometry is sloped and the elevations of the inlet and outlet are also varying in the Y direction.
Please find the geometry attached down below and guide me.
Inlet Mass Flow Rate:10 m3/s
The outlets are the two rectangular extrusions at the end.
I have made the fluid domain by keeping a free board of 1.5 m from the free surface of the water.
Geometry Link
drive.google.com/open?id=1BmPdMWurqg7O0Np4i_wiM_WaZkggtTnP
Hoping for your reply
can you send the geometry file in .iges file format .