First. There is no model year for this video which there are some differences. Second. It would have been easy to drop the assembly that the shock attaches to. Third. You should have left bolts untightened until you got them all in place to save yourself the struggle. Fourth. Those two rear bolts needed red thread locker on them which means these are not secured.
Arm bushing will last less than a year and fail because you didn't preload it at ground height.
thank you for note 🔧... but why ?
Is it just the lower bolt? Or is it all 3?
Just one with the bushing(closer to the front)
@@VM-hr2kr so just put the bolt and nut in, but don't tighten until it's on the ground?
@@remi2317 yes, or meassure ground height first and use jack then tighten it.
First. There is no model year for this video which there are some differences.
Second. It would have been easy to drop the assembly that the shock attaches to.
Third. You should have left bolts untightened until you got them all in place to save yourself the struggle.
Fourth. Those two rear bolts needed red thread locker on them which means these are not secured.
ok sir... thank you for advice 👍🏼🔧