First empty the chamber and run a cycle with no instruments and see if the problem persists. If not, then back down the amount of instruments that are put into the chamber. If it continues with atm1, replace the door seal. Push in the safety thermostats at the back of the unit. Call tech support for assistance. Check filter in front of boiler water pump. Replace if necessary. If the problem persists after these recommendations have been performed, please call our tech support at 704-966-1650, option 3.
Atm1 please explain
First empty the chamber and run a cycle with no instruments and see if the problem persists. If not, then back down the amount of instruments that are put into the chamber. If it continues with atm1, replace the door seal. Push in the safety thermostats at the back of the unit. Call tech support for assistance. Check filter in front of boiler water pump. Replace if necessary. If the problem persists after these recommendations have been performed, please call our tech support at 704-966-1650, option 3.