Mine wont go down either even with lock off. The two hydraulic poles are acting as locks. I don't want to apply too much pressure to push down in case something breaks. When the hydraulic parts are attached, the lock is very hard to take off/put on. Unsure how to fix this. Any advice?
Just fixed it. Put the mattress on, then push the mattress down at both sides where the hydraulic pistons are (requires two people) as explained here th-cam.com/video/LZAe4bNJpa4/w-d-xo.htmlsi=fm-Grf5SAb660-pE
Anyone know how to assemble the Appleby single bed. Stuck on attaching middle bone 8 and 7 to middle panel 6. There are no specific measurements to determine exactly how far from the edge
Ok so.. for those that struggle as much as I did. The first time they show the headboard. And drop the nut in... Within seconds he flips the middle part of the headboard and holds that nut from underneath. This is very fucking important cus otherwise it all gets a bit ass about face. But It doesn't mention it and the paper instructions do a shite job of illustrating it too. Mattress side of the middle part of the headboard NO HOLES. Side Posts .. holes face the mattress, which makes sense. Wish I'd gone to IKEA 🤣
By the time i figured out the hieroglyphics on the paper to build the bed frame, my wife divorced me and took half the bed, she said i was giving it too much attention.. Now im left with half a bed wouldn't recommend!
Shockingly bad. Supplied the wrong brackets on the bed sides - one left and one right per side which means that only one of them works and you can't swap them over..... Oh and in these instructions they've got the bed headboard the wrong way around in the first stage which they magically correct later. The handle like parts and the brackets have also changed design which doesn't match the video or instructions provided. Poo show.
Thank you!!! Wouldn’t have been able to do this with just the paper instructions! Tip - make sure safety lock off and mattress on top before closing!
No demonstration of step 4.1
This is worse than the instructions you get with the bed.
Anyone know how to fix it when the hydraulics won't let the bed go down?
Hi there, we have this exact problem. What did you do to help?
Your lock is on
Mine wont go down either even with lock off. The two hydraulic poles are acting as locks. I don't want to apply too much pressure to push down in case something breaks. When the hydraulic parts are attached, the lock is very hard to take off/put on.
Unsure how to fix this. Any advice?
Just fixed it. Put the mattress on, then push the mattress down at both sides where the hydraulic pistons are (requires two people) as explained here th-cam.com/video/LZAe4bNJpa4/w-d-xo.htmlsi=fm-Grf5SAb660-pE
Anyone have trouble getting the lock off in the first place? The hook can't unhook on ours
No sound???
My mattress is on, but the pistons dont move. I have the frame looking exactly like the instructions.
Anyone know how to assemble the Appleby single bed.
Stuck on attaching middle bone 8 and 7 to middle panel 6.
There are no specific measurements to determine exactly how far from the edge
My bass handles look nothing like that, no idea how to fix them.
Ok so.. for those that struggle as much as I did. The first time they show the headboard. And drop the nut in... Within seconds he flips the middle part of the headboard and holds that nut from underneath.
This is very fucking important cus otherwise it all gets a bit ass about face. But It doesn't mention it and the paper instructions do a shite job of illustrating it too.
Mattress side of the middle part of the headboard NO HOLES.
Side Posts .. holes face the mattress, which makes sense.
Wish I'd gone to IKEA 🤣
By the time i figured out the hieroglyphics on the paper to build the bed frame, my wife divorced me and took half the bed, she said i was giving it too much attention.. Now im left with half a bed wouldn't recommend!
God these guys need to make it classy like a badass girl you go
Useless instructions
Genuinely terrible.
Did you get there in the end?
Shockingly bad.
Supplied the wrong brackets on the bed sides - one left and one right per side which means that only one of them works and you can't swap them over.....
Oh and in these instructions they've got the bed headboard the wrong way around in the first stage which they magically correct later. The handle like parts and the brackets have also changed design which doesn't match the video or instructions provided.
Poo show.
Very useless
This is the worse instruction there’s no voice so you can’t hear what is saying.
Y3ha ikr like 😅😮😮😮😅😅😂😢🎉😮😂😅😅