I pre ordered the origin gundiver and it was supposed to ship October and I had to cancel because it never arrived. I had to order it again for 65 bucks off Amazon in December.
I love this kit so much and luckily my local shop has it waiting for me. It will be my second kit :D I'm new to gunpla so your channel has helped me out so much.keep up the great work!
you can use other backpacks if u slide on the extra build burning backpack. there's also the part that turns the 2 pin to one pin. there's also the denial backpack on the g runner
I like the black & yellow of the colorscheme, but you're right that the red & blue is just too much. I'd suggest swapping the red with a darker grey... maybe use red for the eyes instead (+1 menace).
The molded gold on this and that SD you reviewed recently seems nicer than what they were using when the revive Hyaku Shiki came out. Maybe that's just because it's being used as accents instead of the whole body though.
It definitely looks a lot like the Denial. The body and head are pretty much identical minus the clear parts. It even has most of the same stickers on the legs. My sister bought me the Denial, and it's a lot of fun to pose.
I'm pretty sure the problems with the head articulation trace back to Denial Gundam. I'm not sure why its like that but it probably has to do with all of the clear parts Denial came with. I know it has two separate clear parts that connect to its head which are both pretty big. Maybe the limited articulation is for better stability for when these clear parts are attached? Also, can you confirm whether or not this kit comes with enough parts to turn it into a Black and Gold Denial Gundam variant instead?
Good to know, that makes sense! As for making a Denial or Cathedral in black/gold~ you have some leftover parts, but really not enough to do anything more than a couple small variants to the Schwarzritter. Definitely not all the parts required to make the full Denial or Cathedral.
Does clipping the nub on the neck joint mess up the head’s stability? If I could free up at least some extra articulation then I’m really tempted to do so.
I like it when you take the wings off the back to make the big sword, but not a fan when its holding the sword. Not as cool as the Cathedral, unfortunately.
Hmm I wonder if the shoulders not fitting properly is due to mold degradation since it's using the Denial's mold? Apparently it's starting to effect the IBO Gundam Frame HGs.
So just to confirm because I just got this kit from Gundam Planet yesterday. The little nub on the neck can be removed to slightly improve the head articulation without any ill effects to that articulation, correct? It won't become too loose or roll around uncontrollably?
Totally took my color scheme all the way to blue ob the eyes. Which yes I know is a lot of colors. But I think I do my best to balance the colors more than this kit does. Though I do like this kit. Good review of it.
tough call, both have aspects I like and dislike. Both of them I really want to repaint in different colors. But if I had to choose one, then I'd go with the Transient Glacier.
embodiment of evil yeah, you have the original gold head crest bit without the space to plug the visor, just use that part instead of the one you're meant to according to the manual
I was hyped for this kit. Unfortunately it shares all the problems with the Denial itself... the loose waist, lack of articulation and side skits pop off too often. I also dislike the plastic piece that connects to the shoulder. Wish they used poly apps instead. Still I love the sword it comes with and the design is badass.
I was looking forward to this kit cos I like the look but I might pass on it for now and get Amazing Strike Freedom instead and use a different backpack on it
i thought this kit was base of the ibo series,i would like to see some new characters in the build fighter series who have Gundams based off the ibo series.
I would suggest using usa gundam store becuase they have very well kept model kits and cheaper than regular prices!
I agree! ;)
Kai McDonald hobbywave was a good store but its going away
they screwed me over on a p bandai kit. I only use Gundam planet for my retail releases and I have a Japanese Amazon seller for all exclusives.
Taylor McHone what happened?
I pre ordered the origin gundiver and it was supposed to ship October and I had to cancel because it never arrived. I had to order it again for 65 bucks off Amazon in December.
1:52 dat spit onto the rotating base LUL
LOL..
haha! i was wondering if anyone would notice that!
Thanks! ^^
Hahaha!!!
Yeah, I can't stop looking at it.
Worth mentioning is for once you get multiple sets of hands, AND backs for most of the hands! Bandai doesn't seem to like giving extra hands.
I love this kit so much and luckily my local shop has it waiting for me.
It will be my second kit :D
I'm new to gunpla so your channel has helped me out so much.keep up the great work!
it looks like a alphamon in digimon anime
Fan Zhang it does doesnt it.😮
this and barbatos makes the alphamon and omegamon combo
i mean color skin like alphamon
Fan Zhang theres a custom of barbatos made into omegamon
Love the build fighters designs so far. Now if we can only get them to bring out the MGs.
you can use other backpacks if u slide on the extra build burning backpack. there's also the part that turns the 2 pin to one pin. there's also the denial backpack on the g runner
MMM9 right! I forgot that part. But I hate using those cause they set the backpack too far from the MS, it looks weird
I like the black & yellow of the colorscheme, but you're right that the red & blue is just too much. I'd suggest swapping the red with a darker grey... maybe use red for the eyes instead (+1 menace).
Colour switch from black to white, from gold to blue, white to silver?
I got this one but the legs just keep falling of over and over and i am not a bluer
The molded gold on this and that SD you reviewed recently seems nicer than what they were using when the revive Hyaku Shiki came out.
Maybe that's just because it's being used as accents instead of the whole body though.
turtleant120 i think thats it
nub on the neck ball joint is just for support the weight of clear hair effect parts that hg denial gundam comes with (i guess)
interesting! thanks!
you're welcome
It definitely looks a lot like the Denial. The body and head are pretty much identical minus the clear parts. It even has most of the same stickers on the legs. My sister bought me the Denial, and it's a lot of fun to pose.
I'm pretty sure the problems with the head articulation trace back to Denial Gundam. I'm not sure why its like that but it probably has to do with all of the clear parts Denial came with. I know it has two separate clear parts that connect to its head which are both pretty big. Maybe the limited articulation is for better stability for when these clear parts are attached?
Also, can you confirm whether or not this kit comes with enough parts to turn it into a Black and Gold Denial Gundam variant instead?
Good to know, that makes sense! As for making a Denial or Cathedral in black/gold~ you have some leftover parts, but really not enough to do anything more than a couple small variants to the Schwarzritter. Definitely not all the parts required to make the full Denial or Cathedral.
Does clipping the nub on the neck joint mess up the head’s stability? If I could free up at least some extra articulation then I’m really tempted to do so.
The sword reminds me of the Blue Frame's Tactical Arms sword, but with less gimmicks.
any recommendations for markers or paints to use on this?
I like it when you take the wings off the back to make the big sword, but not a fan when its holding the sword. Not as cool as the Cathedral, unfortunately.
Hmm I wonder if the shoulders not fitting properly is due to mold degradation since it's using the Denial's mold?
Apparently it's starting to effect the IBO Gundam Frame HGs.
What colors would you prefer it in?
haven't decided yet.
ZakuAurelius have you decided?
which of the kits do you recommend more? Lunagazer, Amazing SF or Schwarz ritter?
among those I actually like the Amazing SF best.
So just to confirm because I just got this kit from Gundam Planet yesterday. The little nub on the neck can be removed to slightly improve the head articulation without any ill effects to that articulation, correct? It won't become too loose or roll around uncontrollably?
yep, it's fine! Go ahead and lop it off! However, it still really doesn't improve that articulation too much
where do you get the stand to display it?
Totally took my color scheme all the way to blue ob the eyes. Which yes I know is a lot of colors. But I think I do my best to balance the colors more than this kit does. Though I do like this kit. Good review of it.
Nice kit also why don't you make a version thats a transition between the cathedral and the schwartzritter
thanks for the head's up review :)
- see you again on your next review :)
This or the Transient Gundam Glacier? (I don't remember what that's called)
tough call, both have aspects I like and dislike. Both of them I really want to repaint in different colors. But if I had to choose one, then I'd go with the Transient Glacier.
1:52 10 points, nice shot
1:52 Cool spit shot Zak! :)
despite this kits flaws i would totally buy this if it was an MG
I want this kit!
so... we cant straight build it without that weird visor there? i feels that visor is weird
embodiment of evil yeah, you have the original gold head crest bit without the space to plug the visor, just use that part instead of the one you're meant to according to the manual
ZakuAurelius alright thanks :D
That nub on the neck joint was for denial so it could use the hair gimmick
Wish they gave us the particle effects like the Denial and burning but in gold. Would have made this kit 100 times better
I was hyped for this kit. Unfortunately it shares all the problems with the Denial itself... the loose waist, lack of articulation and side skits pop off too often. I also dislike the plastic piece that connects to the shoulder. Wish they used poly apps instead. Still I love the sword it comes with and the design is badass.
Also the it's a little on the pricey side :/
Jorge Luis Juarez try using nail polish for the balljoints then also the articulation is honestly average
Sword reminds me of Astray Blue Frame Second L's Tactical Arms, although the TA is probably bigger.
the base model isn't that i.impressive, but THIS kit has mad potential! thanks for sharing the awesome vids!
Cathedral ain't that bad.... Denial, however....
I was looking forward to this kit cos I like the look but I might pass on it for now and get Amazing Strike Freedom instead and use a different backpack on it
TheKillerqueen86 its not a bad kit though also in case you wondering theres a lot of leftover parts if you want to make some variants or customs
dat spit was glorious
i thought this kit was base of the ibo series,i would like to see some new characters in the build fighter series who have Gundams based off the ibo series.
are you a fan of build fighters or try
not that much, as a series. but we've got some cool kits out of the series so i can't complain.
ZakuAurelius ok the kits are Cool and the show your not very interesting
Hi ZakuAurelius, can you make the "Speed Build" for this ms ? Thanks for that
can't too late. sorry.
ok then, thats ok, thanks for your attention
Ultra super maga sword sounds like its from power rangers
R2-P2 #17 I thought the same thing, and the sword even looks like something from power rangers
Yea, Uh huh, you know what it is
Black and yellow x4
hit the pedal once, make the floor shake
they needed to get rid of the red and light grey
another victim of "one too many colors" in the recent HGBF releases
Black Gundams are the best Gundams
*tries not to be racist*
Joeie Rivera lolol
All that black and gold, yet that one red in the abdomen is way too distracting.
gundam Belmont
Pizza
Rammsteiner meat lovers pizza
my favorite food.
Nice Review ^_^
Big huge
gundam black knight lol