Brother that's not a pedal board! That's a freaking piece of artwork. You are a true craftsman my friend. Very much what I am wanting to build for my setup. Amazing!!
it looks amazing! I am definitely using this design as one of my references. it has a few design things i would've chosen to handle differently just for durability purposes but overall it's a well made and beautiful pedalboard. Amazing job! and thanks for taking the time to make the video.
I built a very similar board except I wrapped mine in tolex and use chrome corners. It looks just like an amp. I also have 5 input jacks: IN, OUT, EFFECTS SEND, EFFECTS RECEIVE, FOOT SWITCH. I used locking jacks with colored rings. I color coded the wires to the rings around the jacks. I need to make a new one because it is just too small. My new one will be 32" x 16".
Bro! Amazing job. Just now getting into the pedal phase of my guitar career lol. And I need a board! This is a great one you crafted here. Hope whichever one I eventually get or build is half as nice as this!
I think a lot of people don't start woodworking because they're intimidated by the tools, angles, mistakes, etc and they forget that you can practice first! test stuff out on scrap wood/cheaper wood. practice joining boards, practice using differnet kinds of drill bits, router bits, etc. I understand why it can be scary but you don't have to try out ew ideas on like $80 pieces of mahogany or your final project materials only
Bro, I made this amazing pedalboard of your vid! Would actually love to show it. Really thankful for your job here! Only one tip On the back i added holes to get power cables for the pedals through. It’s very useful for pedals that are in the top row.
Let me start by saying this is beautiful, my only concern would be how is it supported in the middle because it looks like there’s very little support on either the sides or the middle to prevent it from caving in.
Hey i saw this video its great man loved it even i am trying make one but dont have the all the tools . How much would you charge for this kind of pedal board ??
What hinges were used? Looking to make something similar that will hold the lid shut at an angle. Also will lock open so it can be opened and stays open while moving things around inside.
I don't get it. Where do the pedals go? If inside, do you have to leave the lid up or can you detach it? If on top what is there to protect the pedals during transit?
My first thought is wondering if the heat of the power supply would get trapped inside and affect longevity. Really pretty looking board, but not sure I would put a bottom on it like that
Hello, how are you? Could you pass the measurements in centimeters or millimeters? In my country we don't use inches, so it becomes difficult to convert to centimeters or millimeters. Thank you.
Thanks for the inspiration Mitch! Where did you get that gorgeous rough cut walnut lumber? Almost looks like mahogany. And is that just the “Natural” Danish Oil color you used for the finish?
very nice! exactly what my plan is to do this year for my pedals :) But I have a question: Doas anyone know a german seller of all these parts like west coast is doing? I´d like to have shorter delivering-ways an less tax/ custom fee...
Be grateful. I would never have any patience for that. So bad ass. I love how different human brains are than others. Beautiful world..... that said. ... where are the god damn pedals!
Hey Chris! The actual 1/4" jack threads into the ferrel. It sticks through almost flush with the outside of the board. I'm sure a 90 degree plug would fit.
you could send the template with the dimensions of the pedalboard sizes, length, width, height! thanks! (sorry for my english, i used google translator kkkkkkkkk)
I gotta say,thus is way difficult for me as 1) not looking to buy a shop full if tools and take woodworking classes jyst to make a floor board. Buy cheaper thru company
Hopefully this vid shows how these actually work because WCPB doesn't have any vids talking about that. They've got plenty showing the different colors, etc...though 🙄 Edit: nope.
Mine was much easier, aluminium olive leaf, and inside, power suply, one buffer diy, aby switch, kill switch and bypass switch, all diy, just connect the guitar, also have diferent supplys, 9-12-18 volts, very smooth, zero noises, and lighter..
Brother that's not a pedal board! That's a freaking piece of artwork. You are a true craftsman my friend. Very much what I am wanting to build for my setup. Amazing!!
Dang dude! Box joints??? Things are getting pretty classy on this channel! 😁 It looks awesome; great job!!!
Haha! I've come a long way.😂 It's been the most challenging yet for me. Tons of fun though. Thanks man👍
Unreal! That's basically an heirloom! Love that finish. Try to upload a short vid of it all loaded and rocking with your gear. Well done my friend!!
Such a pleasure watching a craftsman work. That looks fantastic.
it looks amazing! I am definitely using this design as one of my references. it has a few design things i would've chosen to handle differently just for durability purposes but overall it's a well made and beautiful pedalboard. Amazing job! and thanks for taking the time to make the video.
Dude! Love your box and love the Savior shirt
Excellent work 😮😮, will you have the measurements of the wood cuts?
I built a very similar board except I wrapped mine in tolex and use chrome corners. It looks just like an amp. I also have 5 input jacks: IN, OUT, EFFECTS SEND, EFFECTS RECEIVE, FOOT SWITCH. I used locking jacks with colored rings. I color coded the wires to the rings around the jacks. I need to make a new one because it is just too small. My new one will be 32" x 16".
Bro! Amazing job. Just now getting into the pedal phase of my guitar career lol. And I need a board! This is a great one you crafted here. Hope whichever one I eventually get or build is half as nice as this!
I think a lot of people don't start woodworking because they're intimidated by the tools, angles, mistakes, etc and they forget that you can practice first! test stuff out on scrap wood/cheaper wood. practice joining boards, practice using differnet kinds of drill bits, router bits, etc. I understand why it can be scary but you don't have to try out ew ideas on like $80 pieces of mahogany or your final project materials only
People don't have the equipment or space for it
having access to a workshop is a barrier. If I had one, then I would...
Really like this pedalboard, very nice job.
Thanks Brett!
You are so talented!! I love watching your videos. Thank you so much for sharing.
Thanks Sharon! I really appreciate that!
Beautiful work.
Thank you
Awesome project, man!
Thanks so much Joe!
Bro, I made this amazing pedalboard of your vid! Would actually love to show it. Really thankful for your job here!
Only one tip
On the back i added holes to get power cables for the pedals through. It’s very useful for pedals that are in the top row.
Very nice! Like your safe style of working.
Thanks for posting this. Kit ordered.
Absolutely beautiful board. What a build. Thanks so much for sharing your process.
Let me start by saying this is beautiful, my only concern would be how is it supported in the middle because it looks like there’s very little support on either the sides or the middle to prevent it from caving in.
That thing is beautiful, great work!
I love the finish. Did you use the "natural" Danish Oil or did it have a tint?
The power block is underneath I assume, correct? Where do all the adapters come out of to plug into the pedals the side hole? Thanks
Is the deck made from 1/2" or 3/4" plywood? Wondering if 1/2" would be strong enough while saving on weight
Hey i saw this video its great man loved it even i am trying make one but dont have the all the tools . How much would you charge for this kind of pedal board ??
Awesome build!
This is incredible, thank you so much. It is beautiful and handy! Amazing work!
What hinges were used? Looking to make something similar that will hold the lid shut at an angle. Also will lock open so it can be opened and stays open while moving things around inside.
Looks fabulous! Thanks for the video 🙏
Love the shirt
Looks amazing! Do you by any chance have info on the dimensions, building plan/scheme. I want to build myself one without ordering the kit.
What thickness did you chose for the walnut? Should I go 4/4 or 5/4 ?
really great man...congratulations from brasil!!
I don't get it. Where do the pedals go? If inside, do you have to leave the lid up or can you detach it? If on top what is there to protect the pedals during transit?
Bro you did a GREAT job!
Also love your shirt!
A lovely board but I'd love to see how to do something like this with basic equipment like a chop saw.
Amazing job mitch.... This is perfect for worship board....
Gob bless you brother....
P.s..... like the shirt and baller NICE!!!!
Very good job! Did you use kitchen hinges or something dedicated? And the holding magnets ? Where I can find them? Thank you!
excellent video, thx for the inspiration
Nice work!
Wow that's really nice. I've been thinking of making one very similar to this and your video will be a big help.
Thanks. I'm glad the video was helpful! 👍
GREAT JOB
Turned out nice. Good job!
Thank you!
Nice! Really beautiful.
Thanks David!
My first thought is wondering if the heat of the power supply would get trapped inside and affect longevity. Really pretty looking board, but not sure I would put a bottom on it like that
Awesome man!
Thanks !👍
Loved the video
Thanks Philip!
Awesome job
Love the work love the 👕.
Hello, how are you? Could you pass the measurements in centimeters or millimeters? In my country we don't use inches, so it becomes difficult to convert to centimeters or millimeters. Thank you.
Can we see a photo of it with the pedals in place? And what does it weigh?
Thanks for the inspiration Mitch! Where did you get that gorgeous rough cut walnut lumber? Almost looks like mahogany. And is that just the “Natural” Danish Oil color you used for the finish?
That’s amazing.
Looking for hinges for my pedalboard project. What kind did you use?
I got my hinges from Amazon. I think i have a link in the description of the hinges I used.
Excellent video man! Where’d you get the magnets that keep the pedalboard lid closed?
Thanks! I got them from Amazon.
Great video! What are the hinges and magnets that you used?
This is a really nice pedalboard but very difficult to build it. Firts of all you need to be a great carpenter 😁
Nice video 👍
Nice! Now, let’s see it in action!
Yess!! Thanks man.
can i question bro ?, you use pure tone mono or stereo jack ? im from indonesian. thanks
very nice! exactly what my plan is to do this year for my pedals :)
But I have a question: Doas anyone know a german seller of all these parts like west coast is doing?
I´d like to have shorter delivering-ways an less tax/ custom fee...
Very cool! I am not aware of a German seller of the parts. You might be able to find some things on Amazon? I'm not sure. Sorry, I wish I could help.
3:48 thank god that wasn't a bottle of beer.
Nice video... thanks for sharing!! Coupon code still works. Just saved $18 ordering my kit.
Be grateful. I would never have any patience for that. So bad ass. I love how different human brains are than others. Beautiful world..... that said. ... where are the god damn pedals!
crazy man ....
It's hard to tell in the video.. how much do the 1/4" jack ferrules sink the jack? Is it too far for a 90 degree plug to work there?
Hey Chris! The actual 1/4" jack threads into the ferrel. It sticks through almost flush with the outside of the board. I'm sure a 90 degree plug would fit.
@@MadebyMitch Thanks!
What audio harness length did you use 15 or 24” and the jack orientation?
Thanks
Aaaa vc é o brabo de konoha
I'll have to call TH-cam, they didnt send me a notify me when you uploaded! Love the box joints with those angles!
Thanks man! I appreciate it. It was a pretty big learning curve for me, but totally worth it.
great
What thickness of board did you use for the pedalboard frame?
Hey Jason, the boards we 5/8" thick.
Que medidas de inclinación tiene? Gracias
Beautiful build. How do you like that Ridgid planer?
Thanks Pete! I love it. It has held up very well.
@@MadebyMitch Thanks Mitch
Umm? It needs a lid so your pedals don't get dirty or loose when you go on the road?
you could send the template with the dimensions of the pedalboard sizes, length, width, height! thanks!
(sorry for my english, i used google translator kkkkkkkkk)
permisi kak..itu pakai kayu apa..pakai cat apa
Which type of hinges did you use ? I’m having troubles getting the right hinges
@Matteo Alonzi Io ho usato queste, 10€ su Amazon. Se hai bisogno di info chiedi pure. th-cam.com/video/pQtjHsmkzM8/w-d-xo.html
If you ever want to sell that board I would happily buy it
I would like to aquire one of these in a hot rod cherry finish
That would be awesome!
nice
My question is, what is the angle?
u would have to be furniture builder to make this a lot of us don't have access to your awsome tools
Where can I buy one?
Love your shirt bro!!!
I gotta say,thus is way difficult for me as 1) not looking to buy a shop full if tools and take woodworking classes jyst to make a floor board. Buy cheaper thru company
Weight?
Greeeeat job! Far from diy for me... I wish I had skills/ experience/ tools to do that
I like it. The wife would be less likely to complain about this one sitting in the middle of the floor.
Hopefully this vid shows how these actually work because WCPB doesn't have any vids talking about that. They've got plenty showing the different colors, etc...though 🙄
Edit: nope.
Why on earth would you finger joint it lol. Just for fun maybe but other than that a dato inset would look cleaner and last forever.
No cut list? 😒
Brasil alguém ?
Can I just buy one 😩
someone has the measures D:?
24"×12.5", rear 4" high, front 1.4" high, boards 5/8" thick
👏👏👏👏👏👏👏👏👍👍👍👍
Mine was much easier, aluminium olive leaf, and inside, power suply, one buffer diy, aby switch, kill switch and bypass switch, all diy, just connect the guitar, also have diferent supplys, 9-12-18 volts, very smooth, zero noises, and lighter..
How can I contact you? I would like to see if you can make me one!
Sheeandre Carrillo second this.
I would much rather buy from you than make this myself.
But what about the satisfaction of creating it yourself. From your own preferences etc and dimensions to match your own particular pedals?
@@wodenoftheangles3339 No.
@@Darren_Tay 'Guess they'll always be the do'ers and the followers..
Well how can I not subscribe to a chanel called made by Mitch.....
Do you make these and sell them yet? Lol
Haha. I've had a lot of interest. I'm considering it.
Would you consider making and selling me one?
Don’t love the carpet, pure hardwood top would’ve been cool. Finger joints came out awesome.