Learn Digital Logic Circuits using CPLD's

This video will describe how to build a simple flip-flop circuit to toggle a LED on and off. The same circuit will also be implemented on a CPLD.
Quartus II video tutorial:
• Altera Quartus II Tuto...

[@SteveAull]

I'm an old school RF tech and wanted to see what FPGA's and PLD's could be used for. Every time I looked on line for the basics it was pretty generic and vague. This one short video explained what a CPLD could be used for and how to get it. Great video.

[@0033mer]

Thanks for the feedback.

[@mandelbro777]

agree. great video for a taste-test

[@VasilisKarastergios]

Instead of using microcontrollers this is a great alternative!
Thanks for sharing.

[@thierry9592]

Great video!

[@omaribrahim5008]

Great jop

[@Decco6306]

so is a CPLD like a less complex FPGA? FPGAs are getting cheap these days and im wondering at what point is it cheaper to get an FPGA (even tho it might be over kill) rather than a CPLD? Ive also noticed that there is more software support for FPGAS as well.

[@nguyenthinh6188]

At here CPLD 4,8$ , FPGA 12$

[@nguyenthinh6188]

CPLD as first step to FPGA

[@prathamkalgutkar7538]

Also As I Remember, FPGAs are RAM based Devices and they need a Separate (some have Inbuilt) Flash Configuration Memory Chop so they can Reconfigure themsleves whenever they powerup. CPLDs are EEPROM or CMOS Flash Based Instead

[@Decco6306]

@@prathamkalgutkar7538 that's nice to know. So a cpld would make better glue logic than an FPGA because it can hold its configuration after power down. Thanks.

[@DavidLeeMenefee]

I agree with the other comment. I like these types of videos..Thumbs up....PEACE

[@dd0356]

Thanks for the video! not many simple cpld videos on youtube.

[@juancabascangob6353]

Mal a vídeos with CPLD (LC4032V) please!

[@svenpetersen1965]

This is a very nice video explaining cplds to somebody, who does not know, yet. I have not learned VHDL, yet, but I have used (Altera‘s) AHDL and also the schematic entry since 1997. I definitely want to get into it (VHDL) again.

[@lasersbee]

Good explanation and Tutorial on CPLDs....
I can see using this CPLD to test Logic Gate circuit designs before a final design to PCB.

[@galaxydefender1033]

Programming an Arduino seems easier from what i have asked, than programming a cpld. But the cpld has more pins apparently. How hard is to learn to program a cpld

[@glynnmason8205]

Thanks for making this video is very help full on cpld's

[@0033mer]

Glad it was helpful!

[@glynnmason8205]

its ok i've worked it out thanks really simple too use the program

[@michaelcoletti6217]

thank you !

[@0033mer]

You're welcome!

[@olaoluwaraji2335]

Nice video. Can it be programmed using VHDL?

[@0033mer]

Yes, you can. Check out the Altera tool set.

[@olaoluwaraji2335]

@@0033mer Thank you

[@lovepreetsinghgill517]

Your video have changed my life. Thanks a lot.

[@0033mer]

You're welcome!

[@aqiiiiiiiil]

Do I need to connect power source in order to program CPLD, if I have USB blaster ?

[@0033mer]

The CPLD board has to be powered when programming with the USB blaster connected.

[@richardmortimer2019]

yes, there is a barrel connector cor connecting a power supply. The 240 has an onboard regulator giving you flexibility in the power supply you can use.

[@tafsirahmedkhan7657]

Thanks for sharing.

[@glynnmason8205]

Hi can toy help how do i get quartus to detect my usb blaster

[@0033mer]

Sounds like a driver problem:
www.terasic.com.tw/wiki/Altera_USB_Blaster_Driver_Installation_Instructions

[@glynnmason8205]

@@0033mer i did get it working i used a different version on Quartus

[@albertoc-b5437]

Gracias. me sirvio !

[@aldhifebrianto_ft6019]

Button Reset in pin?

[@0033mer]

CLRN are reset pins

[@amarbanglaamarbharat8739]

Thanks

[@0033mer]

Welcome