As a new Garrett ATX owner I thank you very much for putting this bit of info up for a quick reference guide , great detector you guys really out did yourselves this time .
When cleaning there is a failing a it is not possible to get into the shaft nearest the coil anyone any suggestions?I see a small welded plastic permanent weld stopping the shaft coming away from the head.It looks lie I would have to drill this out and bodge it somehow to make it rigid and sound again- shame nice machine apart from that.
If your using a mono coil you can use the iron discrimination feature. Works just like the Garrett Infinium. Turn it all the way up, if the target has no signal at max, Dig it! It will be a low conductive target liek gold, brass or lead...
Bearkat4160 that could be away! think i will pass and wait for the new vlf machine! i enjoyed the at gold before i dont have anymore, and the AT pro, i didnt like so i didnt do much hunting with that machine! i will wait. not saying the ATX is total crap it's good for your hunting gold, but detecting farms is a no go, unless u want to dig everything on the field. thanks for the comment's mate
As a new Garrett ATX owner I thank you very much for putting this bit of info up for a quick reference guide , great detector you guys really out did yourselves this time .
What kind of grease? What do you lubricate at 17:04 minutes and for what?
Seems to have a lot in similar to my Infinity LS
I have a metal implant in the right foot /toe. Is there some kind of shielding which I can use to avoid interference or malformation of the detector?
you should be fine. I have pins in my finger and I can run my hand over my vlf with material in my hand and I get very little interference.
Does it also work for buried treasures ?
When cleaning there is a failing a it is not possible to get into the shaft nearest the coil anyone any suggestions?I see a small welded plastic permanent weld stopping the shaft coming away from the head.It looks lie I would have to drill this out and bodge it somehow to make it rigid and sound again- shame nice machine apart from that.
Shaft lock is broken can we can new one
On line kese mile iss ka battery comportment
Sir blaid par Kam nhi krta
at what depth can one find a coin?
On mineralised ground , deeper than any VLF or multi frequency machine .
Pesan dimana.harga brapa
On of switch parchase shop in India
how do u know it's iron in mono? disc will make it lower than a standard machine. terrible machine, for pasture farm hunting!!!!
If your using a mono coil you can use the iron discrimination feature. Works just like the Garrett Infinium. Turn it all the way up, if the target has no signal at max, Dig it! It will be a low conductive target liek gold, brass or lead...
Bearkat4160 but u get what depth with full disc? lol
Wayne Shepherd Not much, you have to turn it back to zero after checking target...
Bearkat4160 that could be away! think i will pass and wait for the new vlf machine! i enjoyed the at gold before i dont have anymore, and the AT pro, i didnt like so i didnt do much hunting with that machine! i will wait. not saying the ATX is total crap it's good for your hunting gold, but detecting farms is a no go, unless u want to dig everything on the field. thanks for the comment's mate
Seems like more work to keep adjusting it! What a pain. No thanks
not impressed