I have a 2018 198p the tubes and the face plate are one piece. When you remove the face place and unstick the tubes from the foam, it all come out as one piece and then you have an open hole. it looks like what yours looked like after the cutting. The good thing about the older ones is no cutting required!
What size Rods can you easily get in that box after Modification ? Will a 7’6” rod fit in there easily? What about an 8 ? Would Ranger void a hull warranty because of the mod ? I know you said you didn’t cut out any structural, but manufacturers can be picky in the fine print .
So far we haven’t. And we have run in some really rough water. But the rods are hitting the edge of the metal. They lay on plastic. But also we use rod socks as well
I just tried this on my 2018 rt 188. It’s all one piece. Had it most of the way out but wouldn’t come out. Decided to mess with it another day so I put it back in. Now I have no power to tilt switch and front graph. Not a good night
Pretty sure it will but you can email us some pictures at oneobjectivebf@gmail.com. And we will see. Also we should have the center rod box plate available soon.
I have a 2018 198p the tubes and the face plate are one piece. When you remove the face place and unstick the tubes from the foam, it all come out as one piece and then you have an open hole. it looks like what yours looked like after the cutting. The good thing about the older ones is no cutting required!
Just did my '12 z521. Messy pain since the tubes are foamed in so well. Worth it though
Oh awesome! Did you use our plate? If so please share some pictures of it.
I did mine. I put quarters inch rubber down
What size Rods can you easily get in that box after Modification ? Will a 7’6” rod fit in there easily? What about an 8 ? Would Ranger void a hull warranty because of the mod ? I know you said you didn’t cut out any structural, but manufacturers can be picky in the fine print .
Any idea of the fit on a 188p? When I clink the link for product it says page not found.
Any idea if this would cause issues with warranties? I know that a lot of places will do anything to get out of honoring a warranty.
Do you guys see any stress issues with the rods hitting the edge during rough water?
So far we haven’t. And we have run in some really rough water. But the rods are hitting the edge of the metal. They lay on plastic. But also we use rod socks as well
Nice video,looks lije the same set uo as a r/t178 .The same 7 tude layout.Wiuld like to get one of the face plates if it is.
Not sure if it will fit the 178
I just tried this on my 2018 rt 188. It’s all one piece. Had it most of the way out but wouldn’t come out. Decided to mess with it another day so I put it back in. Now I have no power to tilt switch and front graph. Not a good night
Would this work on a 2004 195 vs?
Will that work on a 2019 198p. And do y’all have the peace that fits rod tube in the center box
Pretty sure it will but you can email us some pictures at oneobjectivebf@gmail.com. And we will see. Also we should have the center rod box plate available soon.
Have you guys been able to try it on a 188p?
Not yet. Hopefully soon
Is it free shipping
No but the shipping isn’t bad